YAMAHA P-7000S 2X1100W POWER AMPLIFIER

Yamaha P7000S P Series II Stereo Power Amplifier (1000 Watts)
The new P-Series amps are an ideal match to Yamaha's popular Club Series
loudspeakers and deliver a robust amount of pro quality power in a wide range
of configurations designed to suit most any need. To achieve this, they're
designed with big power output, and equipped with YS (Yamaha Speaker)
Processing to deliver a signal that is tuned to the needs of the Club Series
loudspeakers. All models feature both XLR and 1/4-inch TRS inputs and Neutrik
Speakon (tm), 1/4 in., and 5-way binding post outputs to make connections quick
and easy. Other features include Yamaha's exclusive EEEngine technology which
delivers high performance with exceptional efficiency, sweepable high and low pass
filters for optimizing output to any loudspeakers, compact and durable 2U chassis,
and variable speed cooling fans.
Big Output Power Delivered with Great Efficiency
The new P-Series Power Amplifiers deliver a robust amount of professional quality
power in a wide range of configurations designed to suit most any need. In a 4- ohm
bridged application, the P7000S delivers 3200 watts, the P5000S delivers 2600 watts,
the P3500S 2000 watts, and the P2500S 1300 watts.
Those on a budget will find the lineup's high power output and affordable prices deliver
higher quality without putting a strain on funds. Further savings are realized with
extremely efficient operation utilizing Yamaha's exclusive EEEngine technology which
keeps operational costs down by significantly reducing AC power consumption and heat
generation.
The Perfect Match with Your Club Speakers
The new P-Series Power Amplifiers can be used with any loudspeaker system, but if
you're using our Club Series, they will provide power and performance tailored to deliver
maximum performance from your system. In an 8-ohm stereo application power output
per channel on the P7000S is 700 watts, the P5000S 500 watts, the P3500S 350 watts,
and the P2500S 250 watts. This wide selection lets you choose the amplifier that best
matches the power handling capabilities of your speaker system.
All four models are equipped with independent sweepable high and low pass filters on each
channel so you can optimize output for subwoofer or full range systems to provide peak
audio quality and performance from any speaker system you may be using.
Light Weight Keeps Transport and Setup Easy
Look at the specifications and you'll notice that the P2500S and P3500S are respectably light
in weight making transport and setup less strenuous. What's amazing though, is the comparison
in weight per watt when you look at the P5000S and P7000S. The use of a switching power supply
makes these two models very lightweight while maintaining superior audio quality.
Flexible Connectivity
To provide the most flexible connectivity possible, all four models are equipped Neutrik Speakon
(tm) output jacks, and 1/4-inch output jacks for each channel in addition to 5-way binding post.
Channel inputs consist of both XLR and 1/4-inch TRS jacks.

* Speakon is the registered trademark of Neutrik AG.
Other Features
The new P-Series' industrial design delivers a refined and impressive look with deep blue faceplates
bordered in silver trim, handles, and mounts. The chassis is specially designed to provide added
durability and strength. Continuously variable-speed fans mounted internally on either side of the
front panel offer quiet, efficient cooling. Comprehensive protection consists of power on/off muting,
DC detection, thermal protection, current limiting, and a protective cover for the attenuators is also
supplied.
EEEngine
EEEngine (Energy Efficient Engine) Technology makes more efficient use of AC power by reducing
power consumption and heat generation without degrading output power or sound quality. When power
requirements are low, the system uses a highly efficient current buffer to transparently switch input power
on and off as needed. As power requirements increase, an independently responding auxiliary power line
supplies additional power as required. Output isn't compromised, as the auxiliary power line is driven by
the power supply voltage, which maintains maximum output to the speaker load.
YS Processing
With YS Processing (Yamaha Speaker Processing), you get direct compatibility with our popular Club
Series loudspeaker systems. This special circuit optimizes output from the power amplifier to match the
characteristics of Club Series speaker systems delivering a signal that is precisely what the speaker
requires. With the YS Processing system, extra-smooth highs and enhanced low frequency from your
Club Series loudspeaker system is assured.

Technical Description
Specifications
Output Power
1kHz, THD+N=1% 8 Ohms Stereo: 750W + 750W
1kHz, THD+N=1% 4 Ohms Stereo: 1100W + 1100W
1kHz, THD+N=1% 8 Ohms Bridge: 2000W
20Hz-20kHz, THD+N=1% 8 Ohms Stereo: 700W + 700W
20Hz-20kHz, THD+N=1% 4 Ohms Stereo: 950W + 950W
20Hz-20kHz, THD+N=1% 8 Ohms Bridge: 1900W
1kHz, 20mS nonclip 2 Ohms Stereo: 1600W + 1600W
1kHz, 20mS nonclip 4 Ohms Bridge: 3200W
Power Bandwidth (half power): 10Hz-40kHz (THD+N=0.5%)
THD+N (20Hz - 20kHz, half power): Maximum 0.1%
Intermodulation Distortion (60Hz: 7kHz, 4:1, half power: Maximum 0.1%
Frequency Response: 0dB, +0.5dB, ? 1dB f=20Hz-50kHz
Channel Separation: Minimum 70dB 1kHz
Residual noise (Att. min.): Maximum 70dB
S/N Ratio: 104 dB
Damping Factor: 200 max.
Sensitivity @8 Ohms +8dB
Voltage Gain (Att. max): 32.1dB
Input Impedance: 30kOhms balanced; 15kOhms unbalanced
Controls
Front Panel: POWER switch (push on/push off) attenuator (31position) x 2
Rear Panel:
MODE switch (STEREO/BRIDGE/PARALLEL)
FILTER switch (SUB WOOFER/LOW CUT/OFF) x 2
FREQ. CONTROL (25Hz-150Hz) x 2
YAMAHA SPEAKER PROCESSING switch (ON/OFF)
Connectors
Input: XLR-3-31 type/ch, 1/4 in.
Output: SPEAKON, 5-way biding post, 1/4 in. phone/ch
Indicators
POWER: x 1 (Green)
PROTECTION: x 1 (Red)
TEMP: x 1 (Red) heatsink temp 85°
YS PROCESSING: x 1 (Yellow)
SIGNAL: x 2 (Green)
CLIP: x 2 (Red)
Load Protection
POWER switch on/off mute
DC-fault power output cut
Amplifier Protection:
Thermal (heatsink temp 90°C
VI limiter
Limiter Circuit: Comp. THD 0.5%
Cooling: Dual variable-speed fan / Single variable-speed fan
Power Requirements: USA/120V 60Hz
Idle Power Consumption: 45W
1/8 Power Consumption: 700W
Maximum Power Consumption (4 Ohms): 4000W
Dimensions (W x H x D): 18-7/8 in. x 3-7/16 in. x 17-15/16 in.
Weight: 33.1 lbs/ 15.01

Power Output Level R-150 PLUS

STEREO
8ohm(T.H.D 0.05%)  50W+50W
4ohm(T.H.D 0.05%)  75W+75W

BRIDGED MONO
8ohm(T.H.D 0.05%)  50W
8ohm(T.H.D 0.5%)  170W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs

Number of Channels: 2

Output Power: (per channel)

8 ohms 700W
4 ohms 1350W
2 ohms 2400W


Output Power: (bridged)

8 ohms 2700W
4 ohms 4800W

THD%: (@1dB below max output)

@ 1kHz 20Hz to 20kHz
Gain / Sensitivity:

Gain 26/32/33dB
Sensitivity (for max power) +13/7/6dBu (3.5/1.7/1.5V)

Frequency Response: 20Hz to 20kHz (+/- 0.3dB)


Power Consumption:
Nominal @ 240v into 4 ohms 3.0A
Nominal @ 120v into 4 ohms 6.0A

Dimensions: (2U) (mm)

Amplifier 88(h) x 482(w) x 428(d)
Single Box (UK shipping) 230 x 580 x 560
Double Box (outside UK) 250 x 610 x 600

Weight:

Amplifier 10.2kg
Boxed (shipping weight) 11.9kg

User's Manual

Single digital (Class D) amplifier with switching power supply 1200W/70V/100V. Protection against overheating, overcurrent and short circuit output. Features & priority entry program (program override) for message playback emergency. Highpass filter OFF/200Hz/400Hz. Remote control function ON / OFF. Power Supply DC 24V, AC 220 ~ 240V 50/60Hz.

The power amp H2500 is part of Dynacordʼs new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms. Datasheets / ManualsManual (5.50MB)

Load Impedance 2 O, 4 O, 8 O Maximum Midband, Output Power, 1 kHz, THD=1% 2 O - 1900 W, 4 O - 1450 W, 8 O - 850 W Rated Output Power, 20 Hz ... 20 kHz, THD 400 Slew Rate 30 V/µs Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 109 dB Output Noise , A-weighted