| Description | |
- The JJ Electronic ECC83MG / 12AX7MG is a new take on the classic 12AX7 preamp tube
- While it uses the same rugged build and thick glass as other JJ preamp tubes, this tube differs in construction from the typical 12AX7 in that it features a medium-long plate
- The JJ 12AXMG has a dynamic and open sound with a rich forward sounding mid range
- This tube offers low noise and low microphonics
|
- Soft Sound
- Very round in overdrive
- Strong pressure on mitten and in overdrive
- Less gain than RT001
|
- Very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness.
- Selected and recommended for guitar amps to improve overall response.
- Best for clean tones as well as for those deep-bass required for modern preamps.
- The TAD 12AX7A-C became the 1st choice for Boogie®, Brunetti®, Diezel® , Engl®, Fender®, Hughes & Kettner®, Koch®, Laney®, Marshall®, Soldano®, Trace Elliot® and so many more.
| |
- Soft Sound
- Very round in overdrive
- Strong pressure on mitten and in overdrive
- Less gain than RT001
|
| Content | 5751 can be used in most 12AX7 circuits to achieve more headroom.
It has a lower gain about 70% than the standard 12AX7. Good to rope the gain of a high gain amplifier.
| Tube Type: |
5751(12AX7/ECC83) |
| Socket: |
Noval(9 Pin) |
| These are the gold pin version of the standard ECC83. These tubes are immediately discerni-ble from other 12AX7. They have a construction that is similar to a frame-grid tube - similar to the Telefunken ECC803s. This construction makes them very rugged and reliable. This is one of the best new 12AX7 for any guitar amp. It is very musical - rich with great harmonics. An excellent tube in all Marshall amps in the three preamp positions.
Factory selected tubes with gold pins. These tubes provide high gain without the usual noise and microphonic problems you would expect. This is great sound and value for your money.
ECC83S is 12AX7 high gain pre-amplifying double triode. Thanks to its design it also peforms with very low noise and microphonics. Harmonically rich, with a detailed low end and a warm high end.
12AX7/ECC83/7025 / 9Pin Socket Noval |
Selected ECC83 for the big & warm clean sounds (great for HiFi too!) and mellow top-end when pushed to overdrive. Our recommendation if you want to emphasize punchy mids. Especially great when pushed into a fat overdrive.
All preamp tubes labeled Premium Selected have passed the following tests:
- Low Noise Test
- Microphonic Test
- Gain Test
- Sonic Tests
- Shock Tests
- Listening Tests
- Balanced Output Test
Premium Selected
We call the tubes SELECTED which have passed above tests and thus qualify as reliable all-round tubes of their type.Typically this is around 30-60% from a batch that receives the SELECTED label from TAD.
For applications in particularly sensitive functions such as V1 or input stage with combo amps, V1 in high-gain amps, tube microphones and phono preamps, we recommend using the respective HIGHGRADE selection
Matching and Selecting Options for Preamp Tubes
Matching in Pairs for preamp tubes means that two tubes show identical gain, hence, four characteristically identical systems.
This matching method includes our Balance-Selection. We highly recommend this matching method for hi-fi systems.
TAD Premium Selected/Highgrade tubes are guaranteed for a period of 6 months (according to terms of warranties)
for the quality criteria mentioned above.
| Tube Type: |
12AX7/ECC83/7025 |
| Socket: |
Noval(9 Pin) |
| Selection: |
Premium |
| Product information "12AX7A-C / ECC83 TAD Premium Selected"
Perfect V2+ Preamp Tube - Good Gain - Tight Deep Bass - Fat Mid-range!!
The TAD 12AX7A-C / ECC83 TAD Premium Selected provides very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness.
Selected with balanced systems and recommended for guitar amps to improve overall response.
Best for clean tones as well as for sounds requiring deep-bass power like any modern preamp.
Recommended for all positions in amps with medium gain level or High-Gain Amps for V2+ positions.
As for V1 in general, but especially for higher gain amps or phono/audio-amps, we recommend the RT010 7025 Highgrade, the RT030 E83CC/7025 Highgrade or RT093-HG 7025-WB Highgrade
The TAD 12AX7A-C can replace any 7025, 12AX7WA, 12AX7WB, 12AX7LPS, 12AX7EH, ECC83 or E83CC.
1st choice for:
Blackstar®, Boogie®, Diezel®, Engl®, Fender®, Hughes & Kettner®, Koch®, Laney®, Marshall®, REVV®, Soldano®, Two Rock®, VOX® and so many more.
All preamp tubes labeled Premium Selected have passed the following tests:
- Low Noise Test
- Microphonic Test
- Gain Test
- Sonic Tests
- Shock Tests
- Listening Tests
- Balanced Output Test
Premium Selected
We call the tubes SELECTED which have passed above tests and thus qualify as reliable all-round tubes of their type.Typically this is around 30-60% from a batch that receives the SELECTED label from TAD.
For applications in particularly sensitive functions such as V1 or input stage with combo amps, V1 in high-gain amps, tube microphones and phono preamps, we recommend using the respective HIGHGRADE selection
Matching and Selecting Options for Preamp Tubes
Matching in Pairs for preamp tubes means that two tubes show identical gain, hence, four characteristically identical systems.
This matching method includes our Balance-Selection. We highly recommend this matching method for hi-fi systems.
TAD Premium Selected/Highgrade tubes are guaranteed for a period of 6 months (according to terms of warranties)
for the quality criteria mentioned above.
| Tube Type: |
12AX7/ECC83/7025 |
| Socket: |
Noval(9 Pin) |
| Selection: |
Premium |
| GROOVE TUBES GT 12AT7 PREAMP TUBE
The Groove Tubes GT-12AT7 preamp tube is manufactured to the highest quality JAN spec. NOS, made in Russia for extremely long life.
Used widely in most U.S.-made amps and, in particular, Fender amps. Fender amps with reverb use 2 - 12AT7s -- one for the reverb drive stage, and one as a phase inverter to drive the push/pull output stage. The makeup of the 12AT7 is very similar to the 12AX7 and it can be substituted for a 12AX7 in a pinch. Some players prefer the 12AT7 in the driver stage of a Marshall for a cleaner, brighter tone. (The driver or phase inverter is the 12AX7 located nearest the power tubes.) The 12AT7 is rarely used in a tone-generating stage, but rather in function stages, so the Groove Tubes GT-12AT7 is selected for durability.
Country of origin: Russia |
Selected ECC83 for the big & warm clean sounds (great for HiFi too!) and mellow top-end when pushed to overdrive. Our recommendation if you want to emphasize punchy mids. Especially great when pushed into a fat overdrive.
All preamp tubes labeled Premium Selected have passed the following tests:
- Low Noise Test
- Microphonic Test
- Gain Test
- Sonic Tests
- Shock Tests
- Listening Tests
- Balanced Output Test
Premium Selected
We call the tubes SELECTED which have passed above tests and thus qualify as reliable all-round tubes of their type.Typically this is around 30-60% from a batch that receives the SELECTED label from TAD.
For applications in particularly sensitive functions such as V1 or input stage with combo amps, V1 in high-gain amps, tube microphones and phono preamps, we recommend using the respective HIGHGRADE selection
Matching and Selecting Options for Preamp Tubes
Matching in Pairs for preamp tubes means that two tubes show identical gain, hence, four characteristically identical systems.
This matching method includes our Balance-Selection. We highly recommend this matching method for hi-fi systems.
TAD Premium Selected/Highgrade tubes are guaranteed for a period of 6 months (according to terms of warranties)
for the quality criteria mentioned above.
| Tube Type: |
12AX7/ECC83/7025 |
| Socket: |
Noval(9 Pin) |
| Selection: |
Premium |
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.