Content |
Beyerdynamic Headphones DT 100
The DT 100 headphone is widely used in audio recording and monitoring applications in studios worldwide.
It is also intended for use in ENG/EFP field work, on-air commentary and in any other situation which needs to address the challenges of today's digital and technological advances. The DT 100 offers a high degree of comfort and can be worn for hours without listener fatigue. The soft ear cushions effectively seal out ambient noise yet apply minimal pressure against the ear.
Specifications:-
* Transducer type Dynamic
* Operating principle Closed
* Frequency response 30 - 20,000 Hz
* Nominal impedance acc. to IEC 60268-7 16 ? ± 10% per cartridge
* Nominal SPL acc. to IEC 60268-7 94 dB
* Nominal THD acc. to IEC 60268-7
* Power handling capacity acc. to IEC 60268-7 1000 mW
* Sound coupling to the ear Circumaural
* Ambient noise isolation 20 dB (A)
* Average pressure on ear acc. to IEC 60268-7 4.5 N
* Weight without cable 350 g
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
By the way, the K 271 MK II is also available as a headset with dynamic microphone (HSD 271) or condenser microphone (HSC 271).
| Beyerdynamic DT 150
The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios
and other audio monitoring applications where size, comfort and performance are primarily requirements.
Due to its closed design it features excellent ambient noise isolation for reference monitoring.
- Transducer type: Dynamic
- Operating principle: Closed
- Frequency response: 5 - 30,000 Hz
- Nominal impedance: 250 Ω
- Nominal SPL: 97 dB
- Power handling capacity: 100 mW
- Sound coupling to the ear: Circumaural
- Headband pressure: 4.5 N
- Ambient noise attenuation: approx. 20 dBA
- Weight (without cable): 250 g
| Whether you\'re mixing, monitoring or just enjoying an MP3, you want your headphones to deliver a wide frequency response and high dynamic range. The HPS3000 headphones provide incredible performance for a price well within any budget
The HPS3000 provides everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution cobalt capsules that deliver every nuance of your sound. The one-sided cable is engineered from the finest oxygen-free copper wire that resists tangling and provides maximum durability. It also comes with a 1/4" TRS adapter for the 1/8" TRS connector, making it compatible with everything from your MP3 player to your mixing console.
FEATURES
- Ultra-wide frequency response
- High-definition bass and super-transparent highs
- Ultra-wide dynamic range
- High-efficiency cobalt capsule
- 1/8" Connector plus 1/4" adapter included
- Single-sided cord with oxygen-free copper wires
- Optimized oval-shaped ear cups
SPECIFICATIONS
HPS3000 High-Performance Studio Headphones
- Capsule diameter: 40 mm
- Frequency response: 20Hz-20kHz
- Max. power handling: 100 mW
- Impedance: 64 Ohm
- Sensitivity: 110dB@1kHz
- Cord length: 2.0 m
- Connector: 1/8" TRS connector plus 1/4" TRS adapter
|
- Professional hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High ambient noise attenuation
- For broadcast and DJ use
- Rugged construction for tough handling
- Leatherette ear pads and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed K 171 MK II combines the benefits of a closed-back design with the lightweight and comfort of supra-aural headphones.
The K 171 MK II is an excellent choice for DJ and broadcast applications where no sound can bleed from the headphones into live microphones.
The closed-back, loud and rugged design gives the K 171 MK II a different low-frequency character and maintains its comfort and flexibility.
Type | closed-back, dynamic headphones | Sensitivity | 94 dB/mW, 107 dB/V | Frequency range | 18 to 26,000 Hz | Rated impedance | 55 ohms | Max. input power | 200 mW | Earpads | leatherette and velvet | Cable | 3 m single-sided and 5 m coiled cable (99,9% oxygen-free); plug-in cable on headphones (mini-XLR connector) | Connector | gold plated stereo mini jack | Adapter | gold plated 1/8" to 1/4" screw-on adapter | Net weight (without cable) | 200 g (7.1 oz.) | Shipping weight | 500 g (17.6 oz.) | Patent(s) | Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651); Acoustics slot resistor for dynamic transducer (Patent no. AT 408.706, US 6,639,991, ZL 01116806) |
| Specs:
- Semi - Open
- Innovative bass refelx system
- Rugged headband cosntruction
- Single-sided coiled cable
- Soft headband pad
- Gold plated stereo mini jack (3.5mm) and 1/4" adapter
- Transducer type: Dynamic
- Frequency response: 5 - 35,000 Hz
- Nominal impedance: 250 ohm
- Nominal SPL : 96 dB
- T.H.D: < 0.2%
- Power handling capacity: 100 mW
- Sound coupling to ear: Circumaural
- Weight (without cable) 295 g
|
Reviews
There are no reviews yet.