The DXS 18 achieves best in class SPL of up to 136dB and delivers the lowest frequency response (down to 32Hz) in the lineup. Housed in a sturdy band-pass enclosure, the custom built 18” driver with a large 4-inch voice coil and a Class-D amplifier delivers 1020W of power with exceptional clarity and accuracy.
General Features
Powered reflex subwoofer
Woofer: 18″ with 4″ voice coil
Ideal for low-frequency extension to all full-range loudspeakers
Maximum SPL: 136 dB
Frequency range (-10 dB): 30 to 150 Hz
High-power 1600W Class-D amplifier module
Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
Optional speaker cover (SPCVR-DXS18X) and wheel kit (SPW-1)
D-XSUB LF Processing
DXS XLF subwoofers are driven by 96 kHz high-power DSP processors and utilize dynamic EQ
Onboard D-XSUB LF processing provides total low-frequency management
Normal mode: Set for ideally balanced low-frequency response
Boost mode: Provides a tighter and more focused bass with some extra punch
Xtended LF mode: Drops the low-end frequencies down even further for a large bottom end
Cardioid mode:
Works with two or more subwoofers
Effectively decreases the sound pressure on stage while increasing the bottom-end output directed towards the audience
Results in a much cleaner stage monitoring environment
DSP Protection
DSP protection functions for maximum output and component longevity
Active subwoofers ensure the combination of transducer and amplifier are matched and optimized for the best possible performance
During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha’s DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability
PA Speaker
Configuration
Active Subwoofer
Enclosure Type
Bass-Reflex Subwoofer
Total Power Capacity
1600 W Peak
1200 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18″ / 457.2 mm Woofer
LF Voice Coil
4″ / 101.6 mm
Magnet
Ferrite
Performance
Frequency Range
30 Hz to 150 Hz -10 dB
Maximum SPL
136 dB
Max Input Level
Line Input:
+24 dBu
I/O Impedance
Input:
20 Kilohms
Connectivity
Audio I/O
2 x Combo XLR-1/4″ TRS Female Balanced/Unbalanced Input 2 x XLR 3-Pin Male Balanced Output
USB
1 x USB-A (External Memory, Host Connection)
Signal Processing
Maximum Sampling Rate
96 kHz
Power
AC Input Power
Universal:
100 to 240 VAC, 50 / 60 Hz
AC Power I/O
1 x IEC (Locking)
Power Consumption
40 W (Idle)
180 W (1/8 Power)
Physical
Mounting
1 x 1.4″ / 35 mm Pole Socket (Top) 1 x M20 Pole Socket (Top)
Handles
1 x Each Side
Cooling
Fan (Variable Speed)
Construction Material
Plywood
Dimensions
21.7 x 25.9 x 28.3″ / 550 x 657 x 720 mm
Weight
107.8 lb / 48.9 kg
Weight
50 kg
Reviews
There are no reviews yet.
Be the first to review “YAMAHA DXS-18-XLF 18″ Active Subwoofer 1600W” Cancel reply
18-inch subwoofer for powerful low-end up to 29 Hz
133 dB max. SPL and 2400 Watt peak power through highly efficient digital Class D power amplifier
Optimized bass reflex ports
DynX DSP with four application presets (three crossover frequencies, cardioid mode)
Switchable signal polarity and adjustable delay line for up to 10 meters
2 x XLR/TRS "combo jack" inputs and 2 XLR Output
18 mm rugged plywood housing and heavy-duty grill
4 Aluminum handles with ergonomic rubber surface
Securely stackable with four stacking-grooves
M20 thread for distance pole
Υψηλής απόδοσης αυτοενισχυόμενο subwoofer με εντυπωσιακές χαμηλές σχεδιασμένο για mobile entertainers, AV production, club/venues.
Content
The DXS 18 achieves best in class SPL of up to 136dB and delivers the lowest frequency response (down to 32Hz) in the lineup. Housed in a sturdy band-pass enclosure, the custom built 18” driver with a large 4-inch voice coil and a Class-D amplifier delivers 1020W of power with exceptional clarity and accuracy.
General Features
Powered reflex subwoofer
Woofer: 18" with 4" voice coil
Ideal for low-frequency extension to all full-range loudspeakers
Maximum SPL: 136 dB
Frequency range (-10 dB): 30 to 150 Hz
High-power 1600W Class-D amplifier module
Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
Optional speaker cover (SPCVR-DXS18X) and wheel kit (SPW-1)
D-XSUB LF Processing
DXS XLF subwoofers are driven by 96 kHz high-power DSP processors and utilize dynamic EQ
Onboard D-XSUB LF processing provides total low-frequency management
Normal mode: Set for ideally balanced low-frequency response
Boost mode: Provides a tighter and more focused bass with some extra punch
Xtended LF mode: Drops the low-end frequencies down even further for a large bottom end
Cardioid mode:
Works with two or more subwoofers
Effectively decreases the sound pressure on stage while increasing the bottom-end output directed towards the audience
Results in a much cleaner stage monitoring environment
DSP Protection
DSP protection functions for maximum output and component longevity
Active subwoofers ensure the combination of transducer and amplifier are matched and optimized for the best possible performance
During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha's DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability
PA Speaker
Configuration
Active Subwoofer
Enclosure Type
Bass-Reflex Subwoofer
Total Power Capacity
1600 W Peak
1200 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18" / 457.2 mm Woofer
LF Voice Coil
4" / 101.6 mm
Magnet
Ferrite
Performance
Frequency Range
30 Hz to 150 Hz -10 dB
Maximum SPL
136 dB
Max Input Level
Line Input:
+24 dBu
I/O Impedance
Input:
20 Kilohms
Connectivity
Audio I/O
2 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input
2 x XLR 3-Pin Male Balanced Output
USB
1 x USB-A (External Memory, Host Connection)
Signal Processing
Maximum Sampling Rate
96 kHz
Power
AC Input Power
Universal:
100 to 240 VAC, 50 / 60 Hz
AC Power I/O
1 x IEC (Locking)
Power Consumption
40 W (Idle)
180 W (1/8 Power)
Physical
Mounting
1 x 1.4" / 35 mm Pole Socket (Top)
1 x M20 Pole Socket (Top)
Handles
1 x Each Side
Cooling
Fan (Variable Speed)
Construction Material
Plywood
Dimensions
21.7 x 25.9 x 28.3" / 550 x 657 x 720 mm
Weight
107.8 lb / 48.9 kg
SPECIFICATIONS
Configuration 18" subwoofer
Transducer
18" cone transducer
Frequency Response (-6 dB) 38 Hz - 124 Hz
Frequency Range (-10 dB) 34 Hz - 143 Hz
Maximum SPL1 135 dB peak
Amplifiers
Power Output2 1000 W Class D continuous
2000 W peak
Input Impedance (ohms) XLR / ¼“: 38k balanced / 19k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material 15 mm painted birch plywood
Finish Black textured paint
Grille Rugged Powder-Coated Steel Grille
Dimensions (HWD) 20.1" x 23.4" x 29.9" with casters
510 mm x 595 mm x 761 mm with casters
Weight (Net) 88 lb (40 kg)
Available Accessories KW181 COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.
2 Independent of limiters and driver protection circuits.
LD Systems ICOASUB18A Powered 18" SUBWOOFER 600WRMS
Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 600-watt RMS or 2400-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you\'re a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
18-inch subwoofer for powerful low-end up to 29 Hz
133 dB max. SPL and 2400 Watt peak power through highly efficient digital Class D power amplifier
Optimized bass reflex ports
DynX DSP with four application presets (three crossover frequencies, cardioid mode)
Switchable signal polarity and adjustable delay line for up to 10 meters
2 x XLR/TRS "combo jack" inputs and 2 XLR Output
18 mm rugged plywood housing and heavy-duty grill
4 Aluminum handles with ergonomic rubber surface
Securely stackable with four stacking-grooves
M20 thread for distance pole
Product type
PA subwoofer
Type
Powered
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
100 mm
Amplifier
Class D
RMS
600 W
Peak power
2400 W
Frequency response (-10dB)
29Hz Preset depending
Max. SPL (peak)
133 dB
Protection circuits
Excursion Limiter , over voltage , over-current , Peak Limiter , thermal overload
Controls
Push encoder
Indicators
LC display
Line inputs
2
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 240 V
Power Consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
Width
626 mm
Height
672 mm
Depth
637 mm
Weight
44,3 kg
DBTechnologies' new subwoofers H Series offer remarkable specifications and user-friendliness. With 1500W (2000W Peak Power) and a high-performance 18' woofer with 8' coil, the Sub 18H is especially suited for small to mid-sized events, where high performance needs to be packaged into compact size. Thanks to their unique configuration, termed Hybrid Horn-Loading, the boxes can be tuned to the lowest frequencies to improve system efficiency and convey a deep, enveloping sound. Unlike conventional horn loaded systems, 15H and 18H subs ensure excellent efficiency even at close listening distance, which makes them suited for use even in small venues.
The KS118 is a very high output active subwoofer producing impressive low frequencies for mobile entertainers, AV production and clubs/venues applications.
Very high output with impressive low frequency performance
3600 Watt Class D amplifier module
18 inch (460 mm) long excursion direct radiating driver
Omni-directional or cardioid radiation modes (cardioid setup requires min. 2 units)
Selectable DEEP™ mode for extremely low frequency extension
Adjustable crossover and delay
Scenes for commonly-used applications that can be saved/recalled
Refined, professional and elegant appearance in any application
Rugged painted wood enclosure for lasting durability
Vertical or horizontal deployment (M20 threaded pole receiver for vertical setup)
Four low-noise, heavy-duty casters
Optional transport cover, KS-LOC security cover and 35 mm loudspeaker pole accessories available
6-Year Warranty with product registration
The KS118 is a very high output active subwoofer producing impressive low frequencies for mobile entertainment, AV production, clubs and performance venues. Featuring an 18-inch direct radiating driver powered by a 3600 Watt Class D amplifier, the KS118 delivers high sound pressure levels with dynamic and musical sound reproduction of very low frequencies.
On-board DSP optimizes and protects system performance as well as offers advanced capabilities such as the ability to array two units in a cardioid arrangement. Highly transportable, the rugged enclosure features comfortable handles and four low noise casters. An M20 threaded pole receptacle accepts a 35 mm pole for easy vertical deployment with full-range loudspeakers.
KS118 Omni-directional, or cardioid (min. 2 units), radiation
Model
KS118
Configuration
Direct Radiating
LF Transducer
460 mm (18 in), Cone
Frequency Response (-6 dB)
41 Hz - 98 Hz
Frequency Range (-10 dB)
35 Hz - 111 Hz
Nominal Coverage Angle
Omni-directional or cardioid radiation modes (cardioid setup requires min. 2 units)
Maximum Rated SPL1
136 dB @ 1 m (peak)
Amplifier
Class D
3600W (peak)
Cooling
Low-noise, variable speed fan
Controls
Power On/Off
Gain Control
Rotary encoder
2 × selection buttons
Indicators
2 × Power LED (front and rear)
Input Signal LED
Limiter active LED
Connectors
2 × locking XLR/F ¼ inch combo
2 × XLR/M (Loop-thru Output)
1 × locking IEC power connector
AC Power Input
Universal power supply 100 – 240 VAC, 50 – 60 Hz
AC Power Consumption (⅛ power)
100 VAC, 3.6 A / 120 VAC, 3.0 A / 240 VAC, 1.7 A
Enclosure Details
Enclosure
15 mm birch plywood
Color
Black (RAL 9011)
Grille
16-gauge Black Powder Coated Steel
Speaker Dimensions (H×W×D)
640 × 520 × 785 mm
25.2 × 20.5 × 30.9 in
Carton Dimensions (H×W×D)
572 × 743 × 896 mm
22.5 × 29.3 × 35.3 in
Net Weight
47 kg / 104 lb (including casters)
Shipping Weight
56.5 kg / 124.6 lb
Regulatory
CE, WEEE, UL, China RoHS, RoHS II, FCC Class B
Included Accessories
4 × Low-Noise, Heavy Duty Casters
Optional Accessories
KS118 CVR Transport Cover, KS-LOC Lock-Out Cover
SP-26 and SP-36 Loudspeaker Poles, SP-16X Extension Pole
1 Peak SPL is measured on-axis, at 1 meter, using Pink Noise, Crest factor 10 dB unweighted.
With product registration. Visit QSC.com for full details
All specifications are subject to change without notice.
Due to unprecedented demand, this product may currently be out of stock at some retailers. We continue to replenish supply regularly and are working to fulfill all orders as rapidly as possible. Please check with your dealer for the latest delivery updates.
The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.
The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.
The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.
Full specifications
Net Weight 45kg (99lbs)
Dimensions 500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components 1 x 18" (457mm) LF driver
Frequency Response 36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction 18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.