WHARFEDALE LX-12 2-WAY SPEAKER 300W

(4 or 8 ohm)
Two way, 12ʼʼ woofer and wave guide with 2ʼʼ(50mm)
titanium diaphragm driver, Trapezoid enclosure, (Cont.300W/Music
600W)
APPLICATIONS: 2 way - FREQUENCY RESPONSE @ +/- 3 Db: 50-
20kHz - SENSITIVITY 1w@1m (Db): 97 - COVERAGE Horiz: 90 - COVERAGE
vert.: 45° - POWER HANDLING (watts): continuous: 400, music:
800, peak: 1600 - MAX SPL(dB): 129 - SYSTEM IMPEDANCE: 4 or 8 -
LF DRIVER: driver size: 12° - H F SECTION: impedance(W): 8, coil size
(mm/ins): 50/2ʼʼ, exit size (mm/ins): 35/1.4ʼʼ, diaphragm mati: Titanium, protect
type: bulb - HF HORN: type: Elliptical - CROSSOVER SECTION:
crossover Frequency: 1.8k, system Fb: 50Hz - ENCLOSURE TYPE: finish
colour (LX): carpet black, construction material (LX): MDF/particle - RIGGING
HARDWARE: 12xM10 flying inserts (LX-12Eonly) STAND ADAPTOR: yes - HANDLE: type: square, quality: 2 - GRILLE:
thikness (mm): 1.5, type: full steel - INPUT CONNECTOR: speakon™ NL4
type: 2, paralle with input connector: yes, hi pass out connector: no - CASTOR:
no - PRODUCT DIMS. (mm): H: 630, W (front/rear): 396/269, D: 396
- WEIGHT (KG): net: 26.5, gross: 28.1

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.

Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1

The C 12.2 is a compact, trapezoidal 12" / two-way full-range cabinet offering very high power handling (500W continuous / 2000W peak) and sensitivity of 97 dB 1W/1m.

The low frequencies are reproduced by an SMX 2120 woofer, whilst in the high frequency range, a DH3 compression driver in a 90° x 50° constant directivity horn handles everything above 1650 Hz.

Flying points for eyebolts allow the cabinet to be flown vertically or horizontally. Available as an option is the DC-MBC12-UMH mounting bracket, which is compatible with the DYNACORD PI-Easy mounting system and supports up to three levels of orientation.

To extend the low bass performance, a Sub 1.15 connected in parallel is recommended.


Cabinet Fullrange
Configuration Passive 2-Way
Components 12" / 1“
Impedance 8 ohms
Rated Power RMS 500 W
Peak Power 2000 W
SPL 1W/1m 97 dB
max. SPL 1m calc. 130 dB
Freq. Range 60 Hz - 20 kHz
Coverage (HxV) 90° x 50°
Dimensions (WxHxD) mm 387 x 550 x 374
Net. Weight 20,7 kg

U-Bygel Mount

Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker
The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package.

It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.

The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.

It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Freq. response (-3 dB): 60Hz - 20kHz
• Freq. range (-10 dB): 45Hz - 20kHz
• Rec. Hi-pass frequency: 45Hz
• Axial sensitivity: 97dB (1W/1m)
• Max. calculated SPL: 130dB
• Horizontal coverage: 90 degree
• Vertical coverage: 50 degree
• Power handling: 500W continuous, 2000W peak
• LF transducer: SMX2120, 12" (305mm) driver
• HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
• Crossover frequency: 1750Hz
• Nominal impedance: 8 Ohms
• Minimum impedance: 5.4 Ohms
• Connectors: (2) Neutrik Speakon NL4\'s
• Enclosure material: plywood and MDF with EVCoat
• Grille: 16 GA steel, black powdercoat, with rotatable logo
• Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
• Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
• Net weight: 44.5lbs (20.2 kg)
• Shipping weight: 50.0lbs (22.7 kg)

PRX412M is a portable, twelve-inch, two-way speaker system designed for either main sound reinforcement or monitoring applications.