Content |
This Master Station is designed to connect to the IP Intercom Exchange, and provides hands-free or handset conversation of high sound quality. This station can be mounted to the wall using an optional YC-280 wall mounting bracket.
* 0 dB = 1 V Power Source | 48 V DC (supplied from the IP intercom exchange (option)) | Power Consumption | 1.8 W (at rated), 2.4 W (max.) | Wiring Method | Non-polar one pair stranded wire system | Transmission System | 2 wire 160 kbps echo canceller transmission system | Signal Level | Under 0 dB* | Speech Method | Hands-free or handset conversation | Audio Frequency Range | 300 - 7,000 Hz | Transmission Range | Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω) | Hands-free | Speaker: 5.7 cm cone-type, 0.6W, 8 Ω
Microphone: Omni-directional electret condenser microphone | Handset | Receive path: Cone-type
Send path: Electret condenser microphone | Line Connecting Terminal | RJ11 modular jack | Installation Method | Desk/Surface mounted master station
(When mounting to the wall, use the optional YC-280.) | Operating Temperature | 0℃ to +40℃ | Operating Humidity | Under 90% RH (no condensation) | Finish | Body, Handset: ABS resin, gray | Dimensions | 148 (W) x 208 (H) x 70.5 (D) mm (excluding a curl cord section) | Weight | 700 g | Accessory | Connection cord (3 m)…1 | Option | Wall mounting bracket: YC-280 |
|
Features:
1) IP67 waterproof and dustproof (Not diving)
2) Relay Forwarding Confirmed (1750 HZ)
3) Tri-Band, Dual Display and Dual Standby
4) High & Low Power Switchover
5) Battery Saving
6) VOX Function
7) Wide/Narrow Band Selection
8) Auto-Back Light
9) Dual Band Standby
10) Time-out Timer (TOT)
11) 50 CTCSS and 104 DCS Codes
12) Voice Prompt
13) ANI Code
14) PC or Manual Program
15) DTMF Code
16) PTT-ID
17) ATUO Keypad Lock
18) Busy Channel Lock Function
19) Low Battery Warning
20) Emergency Alarm
21) Priory Scanning Function
22) U/V Cross Band Dual Watch
Functions:
●Tri-band handheld transceiver, with display function menu on the display ‘LCD’.Working Frequency:136-174MHz/400-480MHz
●High/mid/low power selectable(5 W/3 W /1 W)
●Up to 128 memory channels.
●Cross band reception/transmission
●A variety of display channel number, frequency, channel frequency, channel name, etc.
●CTCSS&DCS
●Tone end of transmission
●Function ‘VOX'(voice operated transmission).
●DTMF emergency alarm
●ANI code
●Selectable Frequency Step 2.5/5/6.25/10/12.5/20/25/50 kHz
●Frequency reverse
●Battery saving function ‘SAVE’.
●Emergency SOS sound and light alarm
●Programmable by PC.
●Broadband (Wide 25KHz)/ Narrowband(Narrow 12.5KHz), selectable..
●Commercial FM radio receiver(65 MHz~ 108 MHz).
●Display illumination and programmable keyboard.
●Built-in LED flashlight
■ Specifications are subject to change for technology improvement without notice
Package contents:
1 x radio
1 x desktop charger
1 x dual band antenna
1 x handstrap
1 x belt clip
1 x battery 4800mAh
1 x user guide |
The IP Intercom Exchange uses packet audio technology to permit connection of up to sixteen N-8000 Series stations, and features two outputs for public address paging. Hands-free conversation is possible between stations. Moreover, the exchange is equipped with a networking interface, allowing up to 192 exchanges to be connected over a network using additional IP intercom exchanges. The Exchange can be mounted in an EIA standard rack (1-unit size) or to a wall using the supplied bracket.
* 0 dB = 1 V Power Source | 230 V AC, 50/60 Hz | Power Consumption | 50 W (at rated), 75 W (max.) | Type of Speech Path | Space sharing/Time Space sharing | Speech Link | Internal: 4/External: 8 (both Half duplex/Full duplex use) | Hands-free Speech Method | Simultaneous conversation by way of echo canceller or
Half-duplex conversation by way of voice switch | Line Capacity | Up to 16 stations | Wiring Method | Non-polar one pair stranded wire system | Transmission System | 2 wire 160 kbps echo canceller transmission system | Signal Level | 0 dB* or less | Transmission Range | Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω) | Power Supply to Station | 48 V DC, Max. 70 mA | Paging Output | Audio: 2 channels Max. 0 dB*, 600 Ω, balanced, removable terminal block
Control: 2 channels, no-voltage make contact output (24 V DC/0.5 A),
removable terminal block | Connecting Terminal | Dedicated connector | Others | Firmware update function, System registration data entry hold facility,
Time of day hold facility, Forced air-cooling, Reset switch (front panel) |
Network Section
Network I/F | 10BASE-T/100BASE-TX (Automatic-Negotiation) | Network Protocol | TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP | Audio Packet Transmission System | Unicast (simultaneous paging to up to 16 zones)
Multicast (simultaneous paging to up to 191 zones) | Connector | RJ45 connector | Voice Sampling Frequency | 16 kHz, 8 kHz (controllable on the software) | Quantifying Bit Number | 16-bit | Voice Encoding Method | Sub-band ADPCM, Cryptosystem | Voice Packet Loss Recovery | Silence insertion | Audio Delay Time | 80 ms, 320 ms (Controllable on the software) | Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp | Installation Method | Rack, Desk, Surface mount | Operating Temperature | 0 ℃ to +40 ℃ | Operating Humidity | 90 %RH or less (no condensation) | Finish | Pre-coated steel plate, black, 30 % gloss | Dimensions | 420 (W) x 44.3 (H) x 356 (D) mm | Weight | 4.1 kg | Accessory | AC power cord (2 m)…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (4 pins)…2, Mini-clamp plug (2 pins)…20,
Plastic foot…4, Screw for fitting plastic foot…4,
Rack mounting bracket…2, Screw for rack mounting…4,
Wall mounting bracket…2, Screw for mounting bracket…8,
Screw for wall mounting …4 |
|
The N-8000AF is an Audio interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog audio input and output, a time synchronization contact input, and each 8 contact inputs and outputs. Connecting the unit to the LAN permits recording of conversations, chime broadcast at regular intervals (time signal) and paging broadcast to be realized. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket.
* 0 dB = 1 V Power Source | 220 - 240 V AC, 50/60 Hz | Power Consumption | 7 W (max.) | Audio Input | 1 input (transformer isolated), -58 dB* to 0 dB*, 2 kΩ, balanced
(MIC/LINE input, controllable on the software)
with input volume control knob, removable terminal block (3 pins) | Audio Output | 1 output (transformer isolated), 0 dB*, 600 Ω, balanced, removable terminal block (3 pins) | Contact Input | 8 inputs, no-voltage make contact input, open voltage: 24 V DC,
short-circuit current: 5 mA or less, removable terminal block (10 pins),
(1 common terminal for 4 inputs) | Contact Output | 8 outputs, relay contact output, contact capacity: 24 V DC/2 - 500 mA,
removable terminal block (16 pins) | Time Sync Input | 1 input, no-voltage make contact input, open voltage: 24 V DC,
short-circuit current: 5 mA or less, removable terminal block (2 pins) | Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (simultaneous paging to up to 8 zones)
Multicast (simultaneous paging to up to 191 zones)
Connector: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16-bit
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software) | Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp, Signal lamp, Peak lamp | Other | Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel) | Setting Method | Rack, Desk, Surface mount | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 90 %RH or less (no condensation) | Finish | Pre-coated steel plate, black, 30 % gloss | Dimensions | 210 (W) × 44.3 (H) × 267 (D) mm (8.27" × 1.74" × 10.51“) | Weight | 1.7 kg (3.75 lb) | Accessory | Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (2 pins)…1, Removable terminal plug (3 pins)…2,
Removable terminal plug (5 pins)…2, Removable terminal plug (8 pins)…2,
Plastic foot…4, Screw for fitting plastic foot…4 | Option | Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000AF unit)
MB-15B-J (for rack mounting two N-8000AF units)
Wall mounting bracket: YC-850 |
| Description:
- Streamline design: The main unit has aluminum alloy shell, and the extension has built-in speaker.This system has simple connection for DIY operation.
- Highg quality: This system has top-quality speaker and high-sensitive microphone. Especiall the metal tube microphone is deal for the counter and the dual-way inter-communication.
- Good performance: The voice from this system is clear,and natural. There is a switch ony for the volume control.
- Advance technique: For this system,we adopter the advanced microcomputer from U.S.A
- Definite instruction: The indicating lamp shows the track\'s working status.
- Simple operation I: Easy for dual-way intercommunication without pressing button.
- Simple operation II: This system haw two knobs to adjust the inside and outside volume. When the indicating lamp for audio turns green,the intercommnication could begin.
- Simple operation III: You could record the voice through record jack.
- Best Choice: It suitable for the Bank, Securities Company , Hospital, Station where the security glazing is installed.
Feature:
- Dual-way intercommunication
- Slim fit design of speaker
- Anti-interruption and noise
- Dual-way audio record
Performance Data:
- Brand: RL
- Working voltage: DC9V/0.5A
- Input voltage: AC 110-240V
- Cale length: 160cm
- Main sound (sub sound): 2W, 100Hz-15KHz
- Inside microphone: -48db 20Hz-20KHz
- Outside microphone: -48db 20Hz-16KHz
- Main box size: 158x87x46(335)mm
- Deputy box: 91x77x23mm
Package Includes:
- 1 x Dual-way counter interphone
- 1 x External speaker
- 1 x Charger
- 1 x English User Manual
|
The YC-280 is a wall-mounting bracket specially designed for the master station of the N-8000 series Packet Intercom system. The master station can be installed on a wall or its front operation panel can be inclined from the desk surface by attaching the YC-280.
Finish | Surface-treated steel plate, gray, paint | Dimensions | 100 (W) × 140 (H) × 31.8 (D) mm | Weight | 120 g | Accessory | Screw for wall mounting (wood screw) …2, Rubber foot …4 | Applicable Model | N-8000MS, N-8010MS, N-8020MS, N-8500MS, N-8510MS |
|
Reviews
There are no reviews yet.