SICA Z005200C 8 N 2,5 PL 8Ω 500W PROFESSIONAL SPEAKER NEODYMIUM 8”

• 93 dB sensitivity 1 W / 1 m
• 200 W + 80 W Power Handling
• 2" + 1.75" Sandwich Voice Coil
• Single Point Source providig coherent Wave Front
• 90° conical Dispersion
• Optimal for compact 2- or 3-way Systems

500 W continuous program power capacity 100° nominal coverage 70 - 18000 Hz response 97dB sensitivity Single Neodymium magnet assembly

• Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker in free air, power calculated on rated Zmin
• Power on Continuous Program is defined as 3 dB greater than the Rated Power
• Sensitivity calculated by Thiele and Small parameters, for SPL average in box refer to frequency response
• Thiele and Small parameters measured with laser system after preconditioning test
• Xmax measured with respect to a THD of 10%
• Xvar value corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
• Due to continuing product improvement, the features and the design are subject to change without notice.

Recone kit for FP8PR200

Nominal Specifications

• Nominal Diameter 8“, 200 mm
• Overall Diameter 8.81/8.18“, 223.7/207.9 mm
• Bolt Circle Diameter 8.27“, 210 mm
• Baffle Cutout Diameter 7.20“, 183 mm
• Depth 3.88“, 98.5 mm
• Flange and Gasket Thickness 0.43“, 10.8 mm

• Minimum Impedance 7 Ohm
• Nominal Impedance 8 Ohm
• Nominal Power Handling*** 200 W
• Maximum Power Handling**** 400 W
• Sensitivity (1W/1m) 95 dB
• Frequency Range 70 - 5000 Hz
• Voice Coil Diameter 2“, 52 mm
• Winding Material Aluminium
• Former Material Glass Fiber
• Winding Depth 0.65“, 16.5 mm
• Magnetic Gap Depth 0.31“, 8 mm
• Flux Density 1.15 T

• Resonant Frequency (fs) 65 Hz
• DC Resistance (Re) 5.7 Ohm
• BL Product (BL) 13.5 N/A
• Diaphragm Mass inc. Airload (Mms) 25,3 grams
• Mechanical Compliance of Suspension (Cms) 0.24 mm/N
• Rms 3.38 Kg/s
• Electromagnetic Q (Qes) 0.32
• Mechanical Q (Qms) 3.1
• Total Q (Qts) 0.29
• Compliance Equivalent Volume (Vas) 0.46 ft³, 12.9 dm³
• Surface Area of Cone (Sd) 30.38“², 196 cm²
• Maximum Linear Excursion (Xmax)* 6.92 mm
• Xdamage** 15.7 mm
• Coil Inductance (Le) 0.46 mH
• Diaphragm mass (Mmd) 23.7 g
• Eta Zero 1.06 %

Notes

• *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
• **Maximum excursion before permanent damage
• ***2 Hours Test According to AES 2-1984 Rev. 2003
• ****Maximum power is defined as 3dB greater than nominal power