| Content | WS620XT is a ceiling speaker that can be flush-mounted in false ceiling or panels. It has been designed for external use, even on boats. WS620XT incorporates a 160 mm (6”) loudspeaker, with a 25 mm (1”) coaxial tweeter. The speaker is equipped with a line transformer that enables direct connection to constant voltage systems at 70 V or 100 V. It is possible to use the low impedance taps (4 ohm) removing the transformer. In this case the installation can be done even with reduced depth.
- Weather resistant splashproof speaker
- Two way speaker system with coaxial tweeter, recommended for hi level speech and background-music reproduction
- Music power/RMS: 24/12W (20W if used at 4O)
- 6" woofer with coaxial tweeter
- Body and grille in plastic RAL 9016 White
- IP 55 protection
|
| | - EASY INSTALLATION You can install easily by using provided spring and steel cover. - EFFICIENCY FOR P.A Input transformer is incorporated for high efficiency of p.a use. | | | | | |
| Unit | CS-03A | | Rated Power | W | 3 | | Impedance | Ω | COM, 3.3k, 5, 10k | | Frequency Response | Hz | 150 ~ 15k | | SPL (1W/m) | dB | 90 | | Weight | g | 725 | | lb | 1.6 | | Dimensions (W x H x D) | mm | 227(Ø)x100 | | inches | 8.9(Ø)x4 | | ※ Specifications and design subject to change without notice. | | | |
|
The Control 47C/T features extended bass performance with a wide 120° of coverage that allows fewer speakers to cover a large space. Ideal for a wide variety of applications, the Control 47C/T is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Features:
Proprietary Conical RBI® Technology Provides Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Large Backcan for Bass Response to 50 Hz
Elegant design fits any décor
Specifications:
Component: 6.5" woofer, 1" tweeter
Frequency Range: 50 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1 W 1M
Coverage: 120 degrees conical, consistent broadband
Nominal Impedance: 8 ohms
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield, cutout template, grille
Dimensions (Diameter x Depth): 12" x 10.2“
Suspension Tabs: 3 on top panel
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | Bass reflex type | | Rated Input | 30W (high impedance) | | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | | Low | (Adjustable) 16Ω, 8Ω | | Sound Pressure Leve | 90dB (1W, 1m) | | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component: High frequency | 12cm cone-type | | Speaker Component: Low frequency | 12cm cone-type | | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | | Finish | Enclosure: Steel plate, plating
Baffle: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net: Steel plate, white, paint | | Dust-proof bag | n/a | | Dimensions | ø230 x 229 (D)mm | | Weight | 3.7kg (including mounting accessories) | | Accessories Panel | 1 | | Ceiling reinforcement ring | 1 | | Safety wire | 1 | | Paper pattern | 1 | | Option Anchor hanging bracket | HY- AH1 | | Back can | HY- BC1 | | Tile bar bridge | HY- TB1 | | Trim ring | HY- TR1 | | Electronic controller | AC- 120C | | Note | The F-122C must be used with an Electronic Controller AC-120. |
|
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
ΑΒS Plastic. White
Mettalic Grid, White.
8” Dual Cone
Max Power: 20W
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.