Content |
Features
400 Watt digital bi-amplification
127 dB max spl
Wide dispersion 90 x 70 constant directivity horn
10" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 127 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 10" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 549/21.6 mm/inch
Width: 340/13.38 mm/inch
Depth: 304/11.96 mm/inch
Net Weight: 13.5/29.76 kg/lbs
| This highly professional 2-way active system is designed for absolute, long-term reliability. With its multi-functional bass reflex housing and finely tuned, user-friendly presets, the speakers are suitable as full-range, box, satellite and floor monitors. The STINGER® 10 A G3 is powered by a highly efficient Class-D amplifier with a powerful 300-watt continuous output. The specially developed 10" woofer and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion. LD Systems’ proprietary DynX® DSP technology means that the STINGER® 10 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The STINGER® 10 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
- Active 10" 2-way bass-reflex PA speaker
- 127 dB max. SPL and 300-watt RMS performance with a highly-efficient digital amplifier
- Perfect all-rounder for full-range, satellite and monitor applications
- Practical presets for fast and user-specific frequency tuning
- Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
- 10" custom woofer and BMS tweeter driver
- Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
- 2 line/mic input channels with individual gain controllers plus mono mix output
- 12 mm birch plywood housing with ultra-robust polyurea coating and M10 rigging points
- Shock-resistant front grille for optimal protection of the speaker.
- 36 mm dual tilt stand attachment with 0° and 5° tilt angle
- Extensive and smart accessories for installation and transport
General
Product type
PA loudspeaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
65 - 20000
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Controls
2 x gain, 2 x Mic/Line
Indicators
Limit, Mic, Mode, On, Protect (protection circuit engaged), Signal
Line input connectors
6.3 mm jack, XLR
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), Switching power supply
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
|
RCF ART 910-A Two-Way 10″ 2100W Powered PA Speaker with Integrated DSP Digital 10”+1,75”,1050Wrms(x)
Key Features
- Advanced DSP with 3 Presets
- FiRPHASE Filters for Coherent Sound
- Bass Motion Control Low-Freq Management
- 100x60° Coverage Angle
- Combination XLR-1/4" Inputs + XLR Output
- 50 Hz to 20 kHz Frequency Response
- 130 dB Max SPL Output
- True Resistive Waveguide Technology
- 10" Woofer + 1.75" Compression Driver
- Configurations for Floor, Stage, Flown
Designed to deliver stellar audio performance and versatility for intensive audio applications, the 10" RCF ART 910-A is a highly flexible, easy to use, 2100W powered PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 910-A's is well equipped to cover an audience of up to 300.
A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 910-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
A single combo XLR-1/4" connector can accept both unbalanced and balanced signals. There is also an XLR Thru-Output for daisy-chaining to additional speakers or other audio equipment.
The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 10" woofer and 700W to the 1.75" compression driver, which provide full-range audio (50 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 910-A includes a power cord.
- Up to 130 dB sound pressure level
- 2100W Class-D bi-amplification
- 50 Hz to 20 kHz linear frequency response
- 1.75" compression driver
- 10" woofer
- FiRPHASE zero-degree phase technology
- Bass Motion Control (BMC) woofer excursion management
- LINEAR: This preset is recommended for all regular applications of the speaker
- BOOST: This preset creates a loudness equalization recommended for background music applications when the system plays at a low level
- STAGE: This preset is recommended when the speaker is used as a stage monitor
- With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss
- ART 9 is very energy efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
- All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high efficiency with minimum weight.
- The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
- The grille cover is heavy-duty steel, protecting both transducers and vented ports
- The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping, even at maximum volume settings
- It also performs as a reinforcement structure, for greater resistance to mechanical stress.
- When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
- ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
- The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
- When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.
- The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
- FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints
- The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
- This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.
- The True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers
- Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image
- Acoustically, the TRW waveguide mimics a resonance-free pure resistive load, reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.
- High Frequencies: The 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs, making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer
- Low Frequencies: Low-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. The woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels.
Enclosure Type |
Bass-Reflex Loudspeaker/Floor Monitor |
Total Power Capacity |
2100 W |
Amplifier Power Rating |
LF:
1400 W Peak
HF:
700 W Peak |
Amplifier Class |
Class-D |
Drivers
HF Driver |
1 x 1" / 25.4 mm Titanium Compression Driver |
HF Voice Coil |
1.75" / 44.45 mm |
MF Driver |
No |
LF Driver |
1x 10" / 254 mm Woofer |
LF Voice Coil |
2.5" / 63.5 mm |
Performance
Frequency Response |
50 Hz to 20 kHz |
Maximum SPL |
130 dB (Peak) |
Coverage Angle |
100° H x 60° V |
Protections |
RMS, Signal Limiter, Thermal |
Connectivity
Audio I/O |
1x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input
1x XLR 3-Pin Male Thru/Output |
Network I/O |
No |
USB I/O |
No |
Wireless Connectivity |
No |
Signal Processing
Crossover |
High-Pass:
1800 Hz (Internal) |
EQ |
No |
Parametric EQ |
No |
Semi-Parametric EQ |
No |
Dynamic Processing |
Soft Limiter |
Alignment Delay |
No |
Phase Adjustment |
No |
Digital Signal Processing |
FIR Filter, Venue Settings |
Power
AC Input Power |
Universal:
100 to 120 VAC, 60 Hz |
AC Power I/O |
1x IEC Input (Locking) |
Power Consumption |
300 W |
Physical
Mounting |
2 x M10 Fly Point
1 x 1.38" / 35 mm Pole Socket (Bottom) |
Handles |
1x Top |
Cooling |
Convection, Heat Sink |
Construction Material |
Composite, Stainless Steel Grille |
Dimensions |
22.5 x 13 x 12.2" / 571.5 x 330.2 x 309.9 mm |
Weight |
34.8 lb / 15.8 kg |
|
- Class D biamp amplifier (LF 175 W, HF 75 W)
- 2-way bass-reflex enclosure with 25 cm woofer and 3.5 cm driver
- 1 mic/line input (XLR/jack) with level control
- 1 line input (XLR/RCA) with level control
- Master control with 2-band EQ
- Control via Bluetooth
- Black metal grille with acoustic foam
- 3 Rugged carrying handles
- Application possibility: Standing; monitoring; on tripod
XKB-210A
Price-performance champion:
You have high demands regarding your speaker, but a small budget? Then Omnitronic offers you exactly the right thing with the XKB-210 A: the equipment and sound of the active speaker can keep up with significantly more expensive systems. It is ideal for events with live bands and DJs.
Equipment
Powerful bass, clear mids and trebles determine its sound. Further active speakers can be connected to the XKB-210 A via its XLR output. An integrated Bluetooth player, a Biamp amplifier and a 2-band EQ complete the package.
Thought-out design
Thanks to the carrying handles integrated into the design, you can carry the box comfortably with one hand. You can also use the box as a floor monitor: This works just as well as mounting it on a tripod or on a wall.
Power supply: |
230 V AC, 50 Hz |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Power: |
Program: 350W
Rated: 75W RMS HF
Rated: 175W RMS LF |
Frequency range: |
65 - 20000 Hz |
Sensitivity: |
95 dB |
Control: |
Bluetooth |
Attachment system: |
Flange: Ø 36 mm |
Circuitry: |
Class D Biamp |
Controls: |
Limiter |
Connections: |
Output: line via 1 x 3-pin XLR
Input: line via 1 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line via 1 x stereo RCA
Input: line via 1 x 3-pin XLR |
Input channels: |
1 x mono via XLR or RCA or bluetooth, channel control via Rotary dial
1 x mono with Mic-line switch via Combination socket (XLR/jack), channel control via Rotary dial |
Equalizer: |
Master: 1 x 2-band tone control |
Speaker: |
1 x woofer (10") approx. 25 cm with ferrit magnet
Voice coil lows (1.5") approx. 4 cm
Voice coil compression tweeter highs (1.35") approx. 3.5 cm |
Type of speaker: |
Compact cabinet speaker |
Carrying handle: |
3 pc/pcs |
Material: |
Plastic |
Dimensions: |
Width: 31 cm
Depth: 32 cm
Height: 48 cm |
Weight: |
11,15 kg |
|
The DBR10 is the most compact model in its series and in its class. Capable of delivering a maximum SPL of 129dB from its compact enclosure, the DBR10 can be used as a utility speaker in a variety of environments. |
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
- EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
- Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX two-handle design for easy lifting.
ELX200-10P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (10-inch EVS-10M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.
ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
Available Color | Black | Connector Type | (1) Stereo RCA Input, (2) XLR/TRS combo jack, and (1) XLR | Coverage (Nominal -6 dB) H | 90° | Specifications | Coverage (Nominal -6 dB) V | 60° | Crossover Frequency | 1800Hz | Depth | 319mm (12.6“) | Enclosure Material | Polypropylene Composite | Family | ELX200 | Frequency Range (-10 dB) | 53 Hz – 20 kHz | Frequency Response (-3 dB) | 59 Hz – 18 kHz | Grille | 18 AWG steel with powdercoat | Height | 531mm (20.9“) | HF Transducer | DH-1C 1-inch titanium compression driver | LF Transducer | EVS-10M 254 mm (10 in) | Max. SPL/1m (calc) | 130dB | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.8A | Power Rating | 1200W | Powered or Passive | Powered | Shipping Weight | 15.6kg (34.4 lbs) | Speaker Type | Full-Range | Suspension | (3) M10 suspension points | Weight Net | 13.5kg (29.8 lbs) | Width | 330mm (13“) | Woofer Size | 10inch |
|
Reviews
There are no reviews yet.