PLS ST-5403W LED PAR 54X3W RGBW

18 x 8W QUAD Colour LED RGBW PAR Can in black housing

Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.

It is operated using four buttons and an LED display on the back.

The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.

There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.

The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.

• Type: Studio PAR 64
• Colour spectrum: RGBW
• Number of LEDs: 18
• LED type: 8 W QUAD colour
• Refresh rate: 5000 Hz
• Beam angle: 25°
• DMX input: XLR 3-pin male
• DMX output: XLR 3-pin male
• DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
• DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
• Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
• Controls: Enter, Mode, Value Down, Value Up
• Indicators: LED display
• Power supply: 110 V AC - 250 V AC
• Power consumption: 170 W
• Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
• Housing material: metal
• Housing colour: black

Dimensions without mounting bracket

• Width: 230 mm
• Height: 220 mm
• Length: 255 mm

The Cameo CLPFLATPRO12 professional PAR light's super slim design thanks to its convection cooling construction makes it most suitable where space is limited and silent operation is required. 12 high performance 10 watt LEDs produce impressive RGBWA colour mixes from soft pastel hues to rich, warm tints with 16,000 lux and a 30° beam angle while the 3,000 Hz refresh rate eliminates flicker.

The CLPFLATPRO12 features 5 DMX modes with numerous functions, integrated programs and a built-in microphone for sound control. The illuminated LC display with 4 controls facilitates manual operation. The CLPFLATPRO12 also provides master, slave and standalone capability.

The Cameo CLPFLATPRO12 sports a black die-cast enclosure with both 3-pin and 5-pin XLR inputs and outputs for the DMX signal and Neutrik PowerCon sockets for mains supply and daisy-chaining. Its multifunctional bracket allows for a wide variety of mounting solutions.

• Colour Range: RGBWA
• Number of LEDs: 12
• LED Type: 10 W
• Beam Angle: 30°
• DMX Input: XLR 3-pole, XLR 5-pole
• DMX Output: XLR 3-pole, XLR 5-pole
• DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
• DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA, Sound Control
• Standalone Modes: Colour Jump, Colour Fade, Static Colour, Sound Control, Slave Mode, Colour Macro
• Controls: Mode, Value Down, Value Up, Enter
• Indicators: illuminated LC-Display
• Operating voltage: 110 - 240 V AC, 50 / 60 Hz
• Power consumption: 140 W
• Power Connector: Neutrik PowerCon in/out
• Housing Material: Metal
• Housing Colour: Black
• Type of cooling: Convection
• Illuminance (lx 1m): 16000 lx
• Dimensions (without mounting bracket): 230 x 230 x 135 mm

Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WBS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.

It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.

• 18 ultra-bright 3-Watt TRI colour LEDs
• Beam angle of 25 degrees
• Low power consumption of just 80 Watts
• Operated via DMX (6 channels), in master/slave mode or standalone mode
• Integrated microphone for sound control
• Simple to operate using the four buttons and LED display
• Double bracket included as standard
• Cooling method: Fan
• Sturdy aluminium housing with polished or black finish

• Product: LED Par Can
• Type: PAR64
• Colour Range: RGB
• Number of LEDs: 18
• LED Type: 3 W TRI Colour
  
• Beam Angle: 25°
• DMX Input: XLR 3-pole
• DMX Output: XLR 3-pole
• DMX Mode: 6-channel
• DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
• Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
• Controls: Mode, Enter, Value Up, Value Down
• Indicators: LED Display
• Power Supply: 100 V AC - 250 V AC
  
• Power Consumption: 80 W
• Power Connector: Schuko
• Housing Material: Aluminium
• Housing Colour: Black
  
• Dimensions (without mounting brackets): 260 x 280 x 300 mm

The Cameo CLPFLATPRO18IP65 is purpose designed for outdoor use and rated IP65 according to EN 60529. With a powerful illuminance of 23,000 lux and a silent, passive cooling design the super slim professional PAR light is the perfect choice where space is limited. It features 18 ultra bright high performance 10 watt LEDs for impressive, rich RGBWA colour mixing, a 30° beam angle and 3,000 Hz refresh rate to eliminate flicker.

The CLPFLATPRO18IP65 provides master, slave and standalone capability and a total of 5 DMX modes with numerous functions, integrated programs and an LED Display with mode, enter, up and down controls for easy manual operation.

The Cameo CLPFLATPRO18IP65's black die-cast enclosure is protected against dust and low pressure water jets from all directions. It includes dedicated screw connectors for DMX signal and power input and output for daisy-chaining up to 10 units. The universal bracket offers a wide variety of mounting options.

• Colour Range: RGBWA
• Number of LEDs: 18
• LED Type: 10 W
• Beam Angle: 30°
• DMX Input: XLR 3-pole, XLR 5-pole
• DMX Output: XLR 3-pole, XLR 5-pole
• DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
• DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA
• Standalone Modes: Colour Jump, Colour Fade, Static Colour, Slave Mode, Colour Macro
• Controls: Mode, Value Down, Value Up, Enter
• Indicators: LED Display
• Operating voltage: 110 - 240 V AC, 50 / 60 Hz
• Power consumption: 200 W
• Power Connector: 3-pin special screw connector
• Housing Material: Metal
• Housing Colour: Black
• IP Class: 65
• Type of cooling: Convection
• Illuminance (lx 1m): 23000 lx
• Dimensions (without mounting bracket): 280 x 280 x 160 mm

LED spotlight with 7 x 10W RGBW 4-in-1 LED's - EU+UK power cord. KingPAR 3 - output: 6.500 Lux @ 1m - with 4-channel and 7-channel DMX-512 protocol - dimmer, strobe, auto, auto speed, custom programme, dimmer speed, RGBW colour changing - lens: 25¡ - master/slave function - power consumption: 115W - metal housing - 4-button, 16-section display - passive cooling, no noise - also suitable as a stand-alone spotlight thanks to 2 adjustable mounting brackets - 3pin DMX input & output - IEC power input & output - COMMANDOR 4 Compatible - dim. (LxWxH): 300 x 300 x 380mm - net weight: 3.5kg - for indoor use.