Content |
- ・Equipped with a wide range of input ports (XLR, TRS phone, RCA).
- ・Features environmentally friendly "Auto Standby” mode, which reduces power consumption by switching power to stand-by if there is no input over a set period of time.
Format | Bi-amp 2-way bass reflex active monitor speaker | Tweeter | 1-inch soft dome tweeter | Woofer | 5-inch aramid fiber woofer | Frequency response | 50Hz~20kHz | Maximum SPL | 107dB | Amplifier output (rated output) | Class A/B bi-amp 80W
LF:54W (30 W)
HF:26W (15 W) | Input ports Balanced inputs | XLR×1、TRS(1/4 inch PHONE)×1 | Input ports Unbalanced inputs | RCA×1 | Input impedance | 10kΩ | Level control | -∞dB~+6dB | HF level adjust | -2dB/-1dB/0dB/+1dB | Power consumption
(Standby mode) | 100 W
(less than 0.5W) | Maximum external dimensions (W×H×D) | 197mm×301mm×262mm | Unit weight | 6.5kg | Accessories included | Power cord
Userʼs manual |
---|
|
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
- Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
- Powered bass reflex speakers with 15 watts per side and flat frequency response
- Active subwoofer with 50-watt amplifier for increased low end
- Front-mounted controls convenient located on right speaker
- Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
- Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
|
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
|
Capable of producing peak SPL of over 120 dB per pair, and with a low frequency response extending down to 35 Hz, the 8050B is a powerful wideband bi-amplified monitoring system.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
It is an excellent tool for large recording studios, broadcast and surround installations, mastering suites and TV and post-production houses.
The sophisticated low level active crossover has versatile controls for matching the monitor to difficult acoustic environments.
Dedicated very low distortion amplifiers power the drivers, with overload protection for each driver.
The stiff, volume efficient MDETM (Minimum Diffraction EnclosureTM) enclosure and long, curved, flow optimized reflex port combined with low distortion drivers provide solid, clear, low frequencies with a minimum of compression, distortion and port noise artifacts.
The gently curved sided and front MDETM enclosure and advanced Genelec Directivity Control WaveguideTM (DCWTM) provide exceptionally smooth on and off axis frequency responses, precise imaging and optimal directivity across the whole audio spectrum.
Mounting of the 8050B is easy using the included Iso-PodTM(Isolation Positioner/DecouplerTM) which eliminates coloration of the sound by decoupling the monitor from its mounting surface. The monitor can be tilted on the Iso-PodTM to point the acoustic axis directly at the listening position.
Other mounting options are possible using the integrated mounting point on the rear of the enclosure, or the M10 threaded hole on its base.
| 110 dB | | 38 Hz - 20 kHz (± 2 dB)
35 Hz - 21 kHz (-3 dB) | | 1.8 kHz | | Bass 8" + Treble 1“
metal dome + DCWTM | | Bass 150 W + Treble 120 W | | H x W x D 452 x 286 x 278 mm
with Iso-PodTM | | 12.7 Kg (28 lb) | | 1 x XLR analog in |
|
PRICE PER UNIT
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
Woofer |
| Number | 1 | Basket Ø | 9" (228 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Midrange |
| Number | 1 | Basket Ø | 4.5" (116 mm) | Voice coil Ø | 1" (25 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Midrange | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 32 Hz - 50 kHz | THD > 80 Hz | ≤0.6 % | Long term output | ≥114 dB | Max. peak | ≥124 dB | Crossover frequencies | 350 / 2800 Hz | Input impedance | 10 KOhm | Weight | 34 lb (15,4 kg) | Magnetically shielded | Optional | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
The combination of the dedicated 3" LF and 3/4" HF drivers together with the built-in D-class power amplifier delivers unparalleled audio performance in this class.
The PM0.3, inheriting the familiar cosmetic design of the best selling PM-series, is ideal for space-limited desktop home studio, PC audio and MP3 reproduction.
In DetailNewly designed 3" fiber glass cone woofer and 3/4" silk dome tweeter drivers.
Quality matt finished front baffle with a choice of three colors (black, gray and white).
Wooden enclosure box for best audio performance.
Compact yet highly efficient built-in digital amplifier of 15W each channel.
2 x inputs; RCA (L,R) and stereo mini.
Specifications
SPEAKER SECTION
LF driver: 3" (7.5cm) cone speaker
HF driver: 3/4" (19mm) soft dome tweeter
Frequency Response: 110 Hz – 20kHz (+-3dB)
Crossover Frequency: 2.65kHz
AMPLIFIER SECTION
INPUT A
Connector: RCA
Input Sensitivity: 360mV
INPUT B
Connector: Stereo Mini
Input Sensitivity: 650mV
Output Power: 15W + 15W (RMS)
T.H.D. less than 0.1% (at 1W, 4-ohm loaded, 20-20kHz)
S/N Ratio: 90dB or less (A-weighted)
GENERAL
Power Supply: DC IN 15V
Dimensions: 100mm (H) x 185mm (H) x 130mm (D) excluding protrusions
Net Weight: 2.9kgs (1.49kgs R unit + 1.44kg L unit)
Supplied accessories: AC Adapter, L-R Speaker Cable (1.5m), Stereo mini – Stereo mini cable (0.8m)
|
Reviews
There are no reviews yet.