PEAVEY CS-800×4 300W-4Ω POWER AMPLIFIER

Building on the reputation of the world-famous Peavey CS? 800, which conquered
the power amp market in the 1970s, the CS? Series is the global standard bearer
for workhorse reliability. Over the years, these amps have benefited from some of
Peavey's most popular audio innovations, including our exclusive DDT? compression/
anti-clipping protection. With its 2RU design and power points up to 4080 watts, this
latest evolution of the CS? Series is leaner, louder and lighter than ever.

Features
2-rack-space, 4-channel power amp featuring DDT?
1 temperature dependant variable speed fan
400 watts (rms) per channel at 2 ohms
300 watts (rms) per channel at 4 ohms
180 watts per channel at 8 ohms
2 channels 825 watts at 4 ohms bridged
5-year warranty
 
Specifications
Dimensions 19" W x 3.5" H x 17.5" D (Unpacked)
22.5" W x 6" H x 21" D (Packed)
 
Weight 38.3 lbs./ 17.4 kg. (Unpacked)

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 650 W, 4 Ω - 450 W, 8 Ω - 270 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1150 W, 4 Ω - 660 W, 8 Ω - 350 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1300 W, 8 Ω - 900 W Input Sensitivity, rated power @ 8 Ω, 1 kHz + 2,2 dBu (1,0 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 12.6 kg (27.8 lbs)

Yamaha Power Amplifier - XP1000 2 x 110-Watts, 8-Ohms Stereo, 100-Volt, High Sound Quality,
20Hz-20kHz, High Reliability and High Stability, Light Weight and Compact Design of 2U Size,
High-Pass Filter.

The XP power amplifier series featuring high power, high quality, high reliability and high stability
matches various installation sound systems and provides superior acoustic features even in live
performance applications. The series is equipped with various protection circuits including a circuit
for detecting power-on/off, output protection circuit and DC detection circuit. Various indicators
display the status of the protection system. Indicators include PROTECTION indicator, TEMP
indicator that shows overheating of the heat sink, POWER/STANDBY indicator that shows the
power status, as well as SIGNAL and CLIP indicators for each channel.

APPLICATIONS:
Live Performance 
Churches 
Halls 
Banquet Rooms 
Conference Rooms 
Restaurants
 
5-model lineup ranging from 700W* output to 100W* output *(STEREO 8 ohms). 
High sound quality equivalent to upper-class models with parts and emphasizing
on superior sound. 
While realizing a design that ensures high sound quality, efficiency has been
planned down to the finest details for full achievement of both high-definition sound
and superior value. 
Yamaha's exclusive state-of-the-art high-efficiency amplifier driving technology
EEEngine installed. 
A gain switch that can be changed to +4dBu / 26dB / 32dB has been installed on the
rear panel for compatibility with a wide variety of input levels. 
Light weight and compact design of 2U size for installation in any location. 
Monitor and remote terminals for monitoring and control from a remote location. 
High-accuracy 1dB-step detented attenuator. 
Various terminals and features suitable for professional use. 
Special high-pass filter that enables change of cut-off frequency. 
Equipped with various protection circuits, indicators and stepless low-noise fans. 
Best matches with the digital mixing engine DME64N/24N and Installation series
speakers.
 
Output Power, 8? 100W+100W
S/N Ratio, 20Hz-20kHz 96dB
Idle Power Consumption 20 Watts
1/8 Power Consumption (4?/Pink noise) 170 Watts
Power Bandwidth (half power THD+N=0.5%) 10Hz-40kHz
THD+N 20Hz ? 20kHz, half power 0.1%
Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
Frequency Response RL=8?, Po=1W,HPF=OFF 0dB
Channel Separation, Half power RL=8? 1kHz, ATT. Max input 600? shunt 70dB
Residual Noise Att. min, 20Hz-20kHz (DIN AUDIO) -70dBu
Damping Factor, 8?, f=1kHz 200
Voltage Gain, ATT. max 32dB or 26dB or +4dBu input sensitivity by select switch
Maximum Input Voltage +22dBu
Input Impedance 20k?(balance) 10k?(unbalance)
Controls, Front panel Power switch(push on/push off), attenuator(31position) x 2
Controls, Rear panel Mode switch(Stereo/Bridge/Parallel) x 1, HPF switch x 2,
Gain Select switch x 1
Connectors, Input XLR-3-31 type/ch, Euroblock connector(balance)/ch
Connectors, Output Speakon/ch, 5way binding post x 1
Connectors, Monitor/Remote Dsub15P x 1
Indicators Power/Standby x 1(Green/Orange), Signal x 2(Green), Clip/Limit x 2(Red)
Amplifier Protection Thermal: cut the output(heatsink temp ? 90°C) do not return
automatically
Power Requirements UC: 120V/60Hz, EU: 230V/50Hz, A: 240V/50Hz
Weight 12kg (26.5 Ibs.)
Dimensions (W x H x D) 480 x 88 x 456 mm (18-7/8" x 3-7/16" x 17-15/16“)
 

The DPA252 is built as two channel (Stereo) amplifier, capable of delivering a power of 2 x 250 Watt in stereo mode, or 500 Watt in bridged mono mode. It features various specific functions and advanced protection circuitry which protects against DC malfunctioning, short circuit, overheating and overload.

The signal input connections are accommodated with balanced XLR connectors and signal link through with other amplifiers is possible using the XLR output connectors. The operation mode can be selected between Stereo mode, Bridge mode and Parallel mode. The output connections are accommodated with both Speakon and Euro-Terminal blocks.

• Model name: DPA252
• 8 ohms: 2 x 130 W
• 4 ohms: 2 x 250 W
• 8 ohms Bridge: 800 W
• THD+N:
• Signal / Noise: > 100 dB
• Frequency Response: 20 Hz - 20 kHz
• Power Supply: 110 - 240 V AC / 50 - 60 Hz
• Dimensions (W x H x D): 482 x 44 x 330 mm

VLP Series Powere Amplifier

Output Power: 300W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD 200W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 600W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 300

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift Limiter

Dimensions (LxWxH): 14" x 19" x 3.5" / 360 x 482 x 88mm 2-rack mount spaces

Weight: 33 lbs. / 15 Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift; Limiter