Content |
A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level.
Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
Output voltage at 1000Hz, 5cm/sec.
|
10 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
20 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-18.000 Hz
|
Frequency response
|
20-18.000 Hz +3/- 2dB
|
FIM distortion at recommended tracking force DIN 45.542
| |
Tracking ability at 315 Hz at recommended tracking force
|
120 μm
|
Compliance, dynamic lateral
|
11 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
1,5-10,0 g (15-100 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Internal impedance, DC resistance
|
1680 Ohm
|
Internal inductance
|
920 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-600 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Ortofon-Serato S-120 |
|
Type: MC-type
Playback frequency range: 20-20,000Hz
Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
Horizontal/vertical output ratio: 30dB (1kHz)
Output balance: 1.0dB (1kHz)
Stylus pressure: 2.3-2.7g (2.5g standard)
Coil impedance: 10O1kHz
DC resistance: 10O
Load resistance: More than 100O(when head amp connected)
Coil impedance: 28µH (1kHz)
Static compliance: 20×10-6cm/dyne
Dynamic compliance: 6×10-6cm/dyne (100Hz)
Needle shape: Round needle (0.65mil)
Cantilever: Duralumin pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1
|
Type: Moving Coil
Frequency Response: 20 to 20,000 Hz
Coil Impedance: 40 W (1 kHz)
DC Resistance: 40 W
Vertical Tracking Angle: 23 degrees
Recommended Load Impedance: 400 W to 47,000 W
Coil Inductance: 190 mH (1 kHz)
Static Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
Output Voltage: 1.2 mV (at 1 kHz, 5.0 cm/sec)
Stylus Shape: Conical
Cantilever: Aluminium Pipe
Stylus Construction: 0.6 mil
Mount: 1/2” centers
Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm
Weight: 6.8 g
Accessories: Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101
| The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
Output voltage at 1000Hz, 5cm/sec. |
8 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
22 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at -3dB |
20-20.000 Hz |
Frequency response |
20-18.000 Hz -3dB/-2 dB |
Tracking ability at 315 Hz at recommmende tracking force |
90 μm |
Compliance, dynamic lateral |
12 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
-- |
Tracking force range |
2,0-4,0 g (20-40 mN) |
Tracking force recommended |
3,0 g (30 mN) |
Tracking angle |
- |
Internal impedance, DC resistance |
- |
Internal inductance |
- |
Recommended load resistance |
- |
Recommended load capacitance |
- |
Cartridge weight |
18,5 g |
Replacement stylus unit |
Digitrak |
| The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
TECHNICAL DATA |
|
Output voltage at 1000 Hz, 5cm/sec. |
4 mV |
Channel balance at 1 kHz |
2 dB |
Channel separation at 1 kHz |
22 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at - 3dB |
20-25.000 Hz |
Frequency response |
20-20.000 Hz ± 2 dB |
Tracking ability at 315Hz at recommended tracking force *) |
65 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
750 Ohm |
Internal inductance |
450 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge colour, body/stylus |
Black/Black |
Cartridge weight |
5 g |
Replacement stylus unit |
Stylus 5 E |
|
Type: Moving coil (MC)
Frequency response: 15 to 50,000 Hz
Output voltage: 0.4mV (1 kHz, 5 cm/sec.)
Channel separation: 30 dB (1 kHz)
Channel balance: 0.5 dB (1 kHz)
Tracking force: 1.8 to 2.2 g (standard: 2.0 g)
Coil impedance: 12O(1kHz)
DC resistance: 12 O
Recommended load impedance: Min. 100 O (when head amplifier is connected)
Coil inductance: 25µH (1 kHz)
Static compliance: 35 x 10 - 6 cm/dyne
Dynamic compliance: 18 x 10 - 6 cm/dyne (100 Hz)
Stylus: Line contact stylus (curvature radius: 40 x 7µm)
Cantilever: 0.26 mm diameter solid boron
Vertical tracking angle: 23 degrees
Dimensions: 17.3(H) x 16.8(W) x 25.7(L) mm
Weight: 8.0 g
|
Reviews
There are no reviews yet.