Content |
3 pole female cable connector, "heavy duty“, all metal design, gold contacts The X-HD Series is a "Heavy duty" XLR cable connector for outdoor use. All metal design, dust and water protected according to IP 65 by mating with related X-HD cable connector or MPR-HD chassis connector. Gold contacts are standard. - “Heavy duty" cable connector for outdoor use
- All metal design
- NC*FX-HD mates with NC*MPR-HD chassis connector and NC*MX-HD cable connector
- Dust and water protected according IP 65 in mated condition
- Gold contacts
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
|
NC4FX-HD Female heavy duty, metal boot with rubber jacket, water protected, IP65.
TECHNICAL DATA
Electrical Number of contacts: 4 Contact resistance: ? 3 m Insulation resistance - initial: > 2 G - after damp heat test: > 1 G Dielectric strength: 1500 V dc Rated current: 10 A AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF Mechanical Lifetime: >1000 cycles Insertion / withdrawal force: ? 20 N Cable O.D. range: 3.5 mm - 8.0 mm
Materials Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating Shell (male): stainless steel and zinc diecasting combined. Insert: PA 6.6 30% GR (glass reinforced) Contacts: - female: CuSn6 - male: CuZn39Pb3 Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni Latch lock (female): St3K32 Strain-relief clamp: POM Antikink bushing: PUR Sealing jacket: EPDM
Environmental Temperature range: -30° C to + 80° C Flammability: UL 94HB Solderability: complies with IEC 68-2-20 Protection class: IP 65 Compatibility: IEC 61076-2-103 standard | NE5MX - XLR male extension 5pin
PHASE OUT
direct replacement / successor: NC5MXX
5 pole male cable connector with Nickel housing and silver contacts.
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
Features & Benefits
- Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
Title |
NC5MX |
Connection Type |
XLR |
Gender |
male |
Capacitance between contacts |
≤ 7 pF |
Contact resistance |
≤ 3 mΩ |
Dielectric strength |
1,5 kVdc |
Insulation resistance |
> 10 GΩ (initial) |
Rated current per contact |
7,5 A |
Rated voltage |
< 50 V |
Cable O.D. |
3.5 - 8.0 mm |
Insertion force |
≤ 20 N |
Withdrawal force |
≤ 20 N |
Lifetime |
> 1000 mating cycles |
Wiresize |
max. 1.0 mm² |
Wiresize |
max. 18 AWG |
Wiring |
Solder contacts |
Locking device |
Latch lock |
Boot |
Polyurethan |
Contact plating |
2 µm Ag |
Contacts |
Brass (CuZn39Pb3) |
Insert |
Polyamide (PA 66) |
Locking element |
Zinc diecast (ZnAl4Cu1) |
Shell |
Zinc diecast (ZnAl4Cu1) |
Shell plating |
Nickel |
Strain relief |
Polyacetal (POM) |
Approvals |
UL |
Flammability |
UL 94 V-0 |
Standard compliance |
IEC 61076-2-103 |
Protection class |
IP 40 |
Solderability |
Complies with IEC 68-2-20 |
Temperature range |
-30 °C to +80 °C |
|
Female heavy duty, metal boot with rubber jacket, water protected, IP65.
Electrical Specifications:
* Number of contacts: 5 * Contact resistance: = 3 m ohm * Insulation resistance, initial: > 2 G ohm; after damp heat test: > 1 G ohm * Dielectric strength: 1500 V dc * Rated current: 7.5 A * AWG: 2.5 mm²/14 AWG * Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles * Insertion / withdrawal force: = 20 N * Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating * Shell (male): stainless steel and zinc diecasting combined. * Insert: PA 6.6 30% GR (glass reinforced) * Contacts: CuSn6 * Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni * Latch lock (female): St3K32 * Strain-relief clamp: POM * Antikink bushing: PUR * Sealing jacket: EPDM
Environmental Specifications:
* Temperature range: -30° C to + 80° C * Flammability: UL 94HB * Solderability: complies with IEC 68-2-20 * Protection class: IP 65 * Compatibility: IEC 61076-2-103 standard
| NC3MXX
3 pole cable connector, male. Nickel housing and silver contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 2 ?m Ag silver
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard | NC3FXX-B
3 pole cable connector, female. Black metal housing and gold contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn8
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Latch lock: ZnAl4Cu1
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
Reviews
There are no reviews yet.