Price | €12.65 Original price was: €12.65.€11.38Current price is: €11.38. incl. GR VAT | €4.71 Original price was: €4.71.€4.24Current price is: €4.24. incl. GR VAT | €5.83 Original price was: €5.83.€5.25Current price is: €5.25. incl. GR VAT | €9.92 Original price was: €9.92.€8.92Current price is: €8.92. incl. GR VAT | €8.06 Original price was: €8.06.€7.25Current price is: €7.25. incl. GR VAT | €9.05 Original price was: €9.05.€8.15Current price is: €8.15. incl. GR VAT |
Stock | Only 1 left in stock (can be backordered)
| In stock (can be backordered)
| In stock (can be backordered)
| Available on backorder
| In stock (can be backordered)
| In stock (can be backordered)
|
Content |
3 pole female cable connector, "heavy duty“, all metal design, gold contacts The X-HD Series is a "Heavy duty" XLR cable connector for outdoor use. All metal design, dust and water protected according to IP 65 by mating with related X-HD cable connector or MPR-HD chassis connector. Gold contacts are standard. - “Heavy duty" cable connector for outdoor use
- All metal design
- NC*FX-HD mates with NC*MPR-HD chassis connector and NC*MX-HD cable connector
- Dust and water protected according IP 65 in mated condition
- Gold contacts
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
| Neutrik 3FXX Female XLR Cable Connectors / XX Series
The next generation of the worldwide accepted standard. Female connector with cage type contacts,
“solder stop" for ease soldering and additional ground contact for best contact integrity between
chassis and cable connector. Male connector without locking "window“; more stringent housing.
Rugged diecast shell in sleek and ergonomic design.
NC3FXX
3 pole cable connector, female. Nickel housing and silver contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn8
Contact surface: gal 2 m Ag silver
Latch lock: ZnAl4Cu1
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20 | NC3FXX-B
3 pole cable connector, female. Black metal housing and gold contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn8
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Latch lock: ZnAl4Cu1
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
B-NE5-MPD - XLR chassis male 5pin D-type | These compact, low profile, right angle cable connectors are designed to select
any of 7 positions in 45° increments by rotating the assembled insert into various
indents before securing the back cover. Connector type: XLR male. Shell: Nickel.
Contacts: Silver. Mfg. #NC3MRX. | NE5MX - XLR male extension 5pin
PHASE OUT
direct replacement / successor: NC5MXX
5 pole male cable connector with Nickel housing and silver contacts.
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
Features & Benefits
- Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
Title |
NC5MX |
Connection Type |
XLR |
Gender |
male |
Capacitance between contacts |
≤ 7 pF |
Contact resistance |
≤ 3 mΩ |
Dielectric strength |
1,5 kVdc |
Insulation resistance |
> 10 GΩ (initial) |
Rated current per contact |
7,5 A |
Rated voltage |
< 50 V |
Cable O.D. |
3.5 - 8.0 mm |
Insertion force |
≤ 20 N |
Withdrawal force |
≤ 20 N |
Lifetime |
> 1000 mating cycles |
Wiresize |
max. 1.0 mm² |
Wiresize |
max. 18 AWG |
Wiring |
Solder contacts |
Locking device |
Latch lock |
Boot |
Polyurethan |
Contact plating |
2 µm Ag |
Contacts |
Brass (CuZn39Pb3) |
Insert |
Polyamide (PA 66) |
Locking element |
Zinc diecast (ZnAl4Cu1) |
Shell |
Zinc diecast (ZnAl4Cu1) |
Shell plating |
Nickel |
Strain relief |
Polyacetal (POM) |
Approvals |
UL |
Flammability |
UL 94 V-0 |
Standard compliance |
IEC 61076-2-103 |
Protection class |
IP 40 |
Solderability |
Complies with IEC 68-2-20 |
Temperature range |
-30 °C to +80 °C |
|
Reviews
There are no reviews yet.