| Price | €7.33 Original price was: €7.33.€5.08Current price is: €5.08. incl. GR VAT | €13.00 Original price was: €13.00.€10.77Current price is: €10.77. incl. GR VAT | €1.92 Original price was: €1.92.€1.73Current price is: €1.73. incl. GR VAT | €4.58 Original price was: €4.58.€4.12Current price is: €4.12. incl. GR VAT | €6.70 Original price was: €6.70.€6.03Current price is: €6.03. incl. GR VAT | €11.52 Original price was: €11.52.€10.38Current price is: €10.38. incl. GR VAT |
| Stock | In stock (can be backordered)
| Only 1 left in stock (can be backordered)
| In stock
| In stock (can be backordered)
| In stock (can be backordered)
| Only 3 left in stock (can be backordered)
|
| Content | 3 Pole XLR Female Chassis Connector
The DLX series in a compact metal housing with integrated chassis connector offers an excellent shielding and RF protection. It is the ideal match for mating with Neutrik\'s EMC XLR cable connector.
- D Style
- Shielded against RF interference
- Black chrome housing
- Golden contacts
- Solder contacts
Further Information
| Connector Type |
Female |
| Installation |
Yes |
| Gold Contacts |
Yes |
| Angled |
No |
| XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB |
The handy dust protection cover can be used, when no cable connector is mated. The
cover is easy to use and does not block the connectors in the panel below when not in
use.Suitable for Speakon chassis connectors | NC3MXX-B
3 pole cable connector, male. Black metal housing and gold contacts.
The 3 Pole Male Cable Connector from Neutrik is manufactured with a black metal housing and gold contacts.
It is reliable, easy to assemble and improves contact integrity as well as cable strain relief.
Male connector with improved locking recess without "window“, more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well proteced against any damage TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard | B-NE3-FPD - XLR chassis female 3 pin D-Type | XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB |
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.