Content | High Quality Aftermarket Stylus 82515, 3023 GAMMA , N75-6 T2 for SHURE , DUAL and more
For Shure Cartridges M 44C High Quality Stylus Spherical Diamond for Turntable. N75B Type 2 or DN325, Luxor 3823 was earlier called N75-6 Type 2. This popular stylus type is widely used for M75-6, M75-6S, M75-6 Type 2, M75B Type 2 and M75 Type D. Recommended tracking force is 1,5g to 3g.
Specs:
- Stylus N 75-6
- Spherical Diamond Tip 0.7 mil
- Tracking Force: 1.5 – 3.0 grams tracking pressure
- Stylus Color: Beinge
For Cartridges: M75G, M75B, M73, M71, M71MC, M73, M75ED, M75EJ, M75E, M75HE, M44MB, M44C, M44MC, M55, M44E, M44EM, M44MA, M44MB, M44MF, M80EM98, M98/A, M99, Shure AMC50E.
For Needles: N75E, N75EC, N75ED, N75EJII, N75, N75C, DN 320, DN 323, DN 325, DN 365, N 71, N 73, N 75, N 75 D, N75 G, N 75 BT2
Fits the following Turntables models: Garrard DD 130, DD 131, DD 132, DD 132 LX, DD 139, DD 75, GT 35 P, Luxor 3823, Dual 1009, 1016, 1019, Schneider DN-325,Blaupunkt 2015, Braun Audio 2/3 = TC 45/3 mit P 400, Audio 2/3 = TC 45/3 mit P 410, Audio 250 = TC 45/4, Cockpit 250 W, PS 410, PS 600, Bruns LN 144 de Luxe, BSR C 139, C 206, P 203, P 510, P 610, P 710, P 810, Garrard 25 Hifi 9000, G 200 CP, GA 200, GT 55 P, Zero 125 SB, Zero 126 SB, Grundig KS 772, KS 772 A, KS 792, KS 792 A, KS 793, Merano 3, Mozart Hifi, P 50, P 50 A, PS 1, PS 5, PS 60, PS 61, RPC 450 A, RPC 50, Schönbrunn, Studio 2000, Studio 2000 C, Studio 400 A, Studio 505 A, Studio 550, Studio 600, Verdi 2 A, Lenco L 246, L 830, Loewe / Opta SDK 802, SDK 804, SDK 904, Metz Center 4730 mit Dual 1236, Pathe MC 2001 V, MC 2002 V,
MC 3002 V, PE 2012, Kopenhagen, Saba 9900, Ultra Hifi Studio 9800 Stereo, Schneider Cockpit 6000, SDD 80, Team 40, Team 6020, SP 3004, Team 30, TS 1853, TS 1885, TS 2500, TS 2853, TS 3004, TS 3702, TS 5005, Transonic P 65, PE 10, 2015, 3015, 2020 VHS, 3010 VH, 3010 VHS, 3015 T, 3015 VHS, Sharp GS 111, GS 111 F, Siemens RS 105, Telefunken Studio Center 5030, W 233, W 238, W 248, Transonic CRO 5800, P 65 DS, Wega RS 105, RW 546, Studio 3229, Studio 3230, PE 15
2010, 2016, 3046, 3060, 15 Studio, 36 VH, Telefunken Hifi 4040, Hifi Center 4525, W 240and more
Note: This needle was installed on the following turntable models when they were sold.
If the original cartridge has been replaced with a different type, this needle won’t fit.
Match your old needle to the picture before you make a purchase.
|
Stylus 78
Technical data |
| Frequency range | 20-15.000 Hz | Frequency response | 20-12.000 Hz + 2 / - 3 dB | Tracking ability at 315Hz at recommended tracking force *) | 60 µm | Compliance, dynamic, lateral | 15 µm/mN | Stylus type | spherical
| Stylus tip radius | 65µm | Equivalent stylus tip mass | 0,5 mg | Tracking force range | 1,75-2,25 g (17,5-22,5 mN) | Tracking force, recommended | 2,0 g (20 mN) | Tracking angle | 20° | Stylus colour | Black |
| | Recommended for following cartridges |
All Super OM, OM, OMP, TM, Concorde cartridges for playing 78 r.p.m. records
| *) Typical value | DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
The Ortofon Arkiv stylus Boasts clear and accurate sound reproduction and remarkable stereo imaging, making it perfectly suited for sampling, transcription, and numerous other professional applications.
Replacement stylus to be used in Ortofon Arkiv OM and Concorde cartridges. Growing demand for the ability to transcribe vinyl to digital formats has prompted the creation of Ortofon Arkiv cartridge - a cartridge specially designed to provide optimized sound quality specifically for recording purposes. The Ortofon Arkiv cartridge boasts clear and accurate sound reproduction and remarkable stereo imaging, making it perfectly suited for sampling, transcription, and numerous other professional applications.
Ortofon Arkiv Cartridge Specifications:
Frequency response: 20 to 20.000 Hz Output: 6mV Channel separation nominal: 23dB Inductance: 450mH/ch Weight: 5g Tracking force: 3 grams Recommended load: 47K ohms 200pf Stylus tip: Special elliptical |
Stylus 5 Spherical
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-15.000 Hz ± 2 dB
|
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
15 µm/mN |
Stylus type |
spherical |
Stylus tip radius |
R/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,75-2,25 g (17,5-22,5 mN)
|
Tracking force, recommended |
2 g (20 mN)
|
Tracking angle |
20° |
Stylus colour |
Black |
|
OM 5,OMB 5, LMA 5, SMB 5 |
*) Typical value | Stylus 3E
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-18.000 Hz + 2 / - 3 dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value |
Reviews
There are no reviews yet.