Monitor Audio SCPPLW IN WALL LOUDSPEAKER 200W

Frequency Response:     52 Hz - 100 kHz
Sensitivity (1W@1M):     90 dB
Nominal Impedance:     4 ohms
Maximum S.P.L (each):     117.8 dBA
Power Handling (RMS):     200 W
Recommended Amplifier Requirements (RMS):     100 - 200 W
Bass Alignment:     Sealed Cabinet
System Design     3-way
Mid / H.F Crossover Frequency:     2400 Hz
Bass Low Pass Crossover Frequency:     380 Hz
Drive Unit Compliment:     2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
External Dimensions - with Grille (H x W x D):     1205 x 330 x 116 mm
(47 7/16 x 13 x 4 9/16 inch)
External Dimensions - excl. Grille (H x W x D):     1205 x 330 x 102 mm
(47 7/16 x 13 x 4 inch)
Cut Out Depth:     97.5mm (3 13/16 inch)
Weight (each) Excluding stands:     25 Kg (55lbs)

Tweeter 1" silk/polymer x 1
Mid/Woofer 6 ½" composite polymer x 2
Frequency Response 35 Hz - 25 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 10-200 W/ Channel
Efficiency 91 dB
Dimensions(cm) 53.02 x 22.54 x 9.53

Driver Complement
Mid/Woofer     1 - 5-1/4" Diameter (13.34cm)
Dynamic Balance, mineral filled Polymer cone with rubber surround
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance, metalized soft dome in swivel mount
Electrical
Overall Frequency Response     67Hz - 20kHz
Lower -3dB Limit     70Hz
Upper -3dB Limit     20kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     20 - 100 w/channel
Efficiency     90 dB
Dimensions
Size     11" H x 7-9/16" W
(27.94cm H x 19.21cm W)
Cut-out Size     9-5/8" H x 6-1/4" W
(24.45cm H x 15.88cm W)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     2" (5.08cm)
Overall Depth     2-1/2" (6.35cm)
Shipping/Other      
Shipped As     pair
Product Weight     4.00 lbs. (1.81kgs) each
Total Shipping Weight     8.00 lbs. (3.63kgs)
Speaker Warranty     Lifetime Warranty

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance, mineral filled Polymer cone with rubber surround
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance, metalized soft dome in swivel mount
Electrical
Overall Frequency Response     32Hz - 20kHz
Lower -3dB Limit     60Hz
Upper -3dB Limit     20kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     89 dB
Dimensions
Size     12-1/16" H x 8-5/8" W
(30.64cm H x 21.91cm W)
Cut-out Size     10-7/8" H x 7-3/8" W
(27.62cm H x 18.73cm W)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     2-3/8" (6.03cm)
Overall Depth     2-7/8" (7.30cm)
Shipping/Other      
Shipped As     pair
Total Shipping Weight     8.00 lbs. (3.63kgs)
Speaker Warranty     Lifetime Warranty

2-way recessed speaker

The IWP 82 is the larger of the two recessed speakers of the Interior Performance series. Equipped with a 19 mm tweeter than can be pivoted by 35° in all directions, the in-wall system can also be adapted to very custom installation scenarios. As a result, most installation situations can be handled successfully.

Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy.

 
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
25 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
80 / 140 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
8 Ohms
Frequency Response
34 – 26000 Hz
Crossover Frequencies
3800 Hz
Recommended Amplifier Output
20 - 160 Watts
Mounting depth
88 mm
Outer Dimensions (WxH)
254 x 359 mm
Cutting Out (WxH)
218 x 321 mm
Weight
1.6 kg

2 way High-End in-wall/in-ceiling loudspeaker

This built-in wall loudspeaker with particularly high-quality workmanship follows all the major parameters of Magnat´s Quantum technology. Just like the classic home-audio boxes, the IWQ 82 has also been equipped with bass/mid-range cones made from highly stable and torsion-resistant ceramic-aluminium. This material provides extremely accurate reproduction and reveals even the finest of acoustic details.

All the high frequencies are reproduced through a coated fabric dome tweeter that delivers highest pulse fidelity and freedom from distortion. A complex crossover is also responsible for precisely distributing the high and low frequencies.

 
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
25 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
100 / 180 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 – 8 Ohms
Frequency Response
34 – 26000 Hz
Crossover Frequencies
3800 Hz
Recommended Amplifier Output
20 - 200 Watts
Mounting depth
76 mm
Outer Dimensions (WxH)
211 x 297 mm
Cutting Out (WxH)
185 x 272 mm
Weight
1.3 kg