Content | 8" Two-way passive Indoor/Outdoor Installation Loudspeaker 16 Ohm, 70/100 V, black (pair)
Encourage your customers and guests to linger for longer with great sound. Thanks to their wide coverage angle and balanced sound, DQOR loudspeakers provide an inviting ambience.
Whether indoors or outdoors, with its elegant, dynamic design in black or white, the 2-way speaker fits harmoniously into any installation. Thanks to the clever slide-and-lock wall mount with concealed integrated connections, there is no need for unsightly cables. To maintain an elegant and smart look on the long term, the front grille is made of corrosion-resistant aluminum.
No restrictions! With a tilt angle of up to 27° and a 45° horizontal swivel angle, DQOR loudspeakers offer flexible positioning to meet your needs.
DQOR loudspeakers can also be used in a distributed sound system with numerous speakers and long cable runs. The DQOR 3T, DQOR 5T and DQOR 8T models are equipped with multitap transformers for 70V/100V systems to minimize power loss. Play background music and announcements at the sound level you want: the output power of each speaker can be adjusted with a power tap. Alternatively, the transformer variants can also be operated at conventional low impedance amplifier outputs. Their 16 Ohm impedance allows the parallel connection of up to eight DQOR loudspeakers at 2 Ohm. DQOR series loudspeakers provide superb sound and the sort of feel-good atmosphere which always puts your customers and employees in a great mood, whether in your shop, your hotel lobby, at a beach bar or on a cruise ship.
Product type
PA loudspeaker
Low/mid driver dimensions
8 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Waveguide
HF driver magnet
Neodymium
HF driver brand
Custom-made
HF driver voice coil
25.4 mm
Dispersion (H x V)
120° x 80° (-6 dB)
Peak power
240 W (>100Hz)
Frequency response
62 - 20000 Hz (-10dB)
Crossover frequency
1800 Hz
Input selector switch
70 V - 100 V - 16 Ohms
100V transformer power (Taps)
70 - 30 - 15 - 7,5 - 3W
70V transformer power (Taps)
70 - 30 - 15 - 7,5 - 3W
Speaker input connections
4-pole Terminal Block. Pitch 5.08mm
Cabinet material
ABS plastic
Cabinet colour
Black (RAL 9005)
Accessories (included)
Allen Key for the safety screw , Bracket for surface mount
Optional accessories
LDDQORWMC (rubber cover set for wall mount bracket)
|
Ειδική έκδοση του AM 7200/64 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
* 60° x 40° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 60° x 40°, rotatable waveguide
Directivity Factor (Q) : 20
Directivity Index (DI) : 13 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.3 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL : Bi-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m): : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 115 dB SPL
Waveguide : PT-K64MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The P4228 is a weatherproof full range, wide-dispersion, two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1.4” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a double 8” woofer with a 2.5” voice coil. The cabinet is asingle piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped with 4 x M8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 4228 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Features |
---|
Weatherproof cabinet IP 55 | Aluminium grill and stainless steel bracket | Two 8" high-output LF transducer with 2.5" voice coil | Once RCF Precision Neodymium 1.4" Compression Driver with 2.5" voice coil | 110° x 60° constant directivity horn | Built in passive crossover | 2° x 15° enclosure sides for array configurations | Active Mosfet Compression Driver Protection |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | Max SPL @ 1m: | 129 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 60° | | Directivity index; Q: | 9 | | System Sensitivity: | 97 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 400 Watt | | Peak Power Handling: | 1600 Watt | | Recommended Amplifier: | 800 | | Protections: | Dinamyc | | Crossover frequencies: | 1100 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.4“(35.5mm) throat, 2.5" (63.7 mm) coil diaphragm assembly | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 90 Watt AES | | Sensitivity: | 110 dB | | Woofer: | 2x8" (200 mm) woofer with 2.5" (64 mm) coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 300 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 4 pole Amphenol | |
CABINET |
---|
Cabinet Material: | 8 mm Polyethylene rotomoulded | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Gray | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 268 / 10.55 mm/inch | | Width: | 566 / 22.28 mm/inch | | Depth: | 250 / 9.84 mm/inch | | Net Weight: | 13.5 / 29.7 Kg/Lbs |
|
|
Ειδική έκδοση του AM 7200/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 11
Directivity Index (DI) : 10.5 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.2 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5 : Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m) : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 113 dB SPL
Waveguide : PT-K95MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The P3108 is a weatherproof full range, wide-dispersion, two way loudspeaker system for offering substantial power and efficiecny for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 8” woofer with a 2.5” voice coil. The cabinet is a single piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped 4xM8 brass inserts and stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 3108 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Features |
---|
Weatherproof cabinet IP 55 | Aluminium grill and stainless steel bracket | One 8" high-output LF transducer with 2.5" voice coil | Once RCF Precision Neodymium 1" Compression Driver with 1:5" voice coil | 90° x 60° constant directivity horn | Built in passive crossover | 2° x 15° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | 4 brass suspension points (M8) | Imput connector 4 pole Amphenol IP 67 |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | Max SPL @ 1m: | 125 dB | | Horizontal coverage angle: | 90°° | | Vertical coverage angle: | 60°° | | Directivity index; Q: | 11 | | System Sensitivity: | 94 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 300 Watt | | Peak Power Handling: | 1200 Watt | | Protections: | Dinamyc | | Crossover frequencies: | 1800 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1" HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 109 dB | | Woofer: | 8" woofer, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 300 Watts AES | | Sensitivity: | 95 dB | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Gray | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 266 / 10.47 mm/inch | | Width: | 493 / 19.41 mm/inch | | Depth: | 250 / 9.84 mm/inch | | Net Weight: | 10 / 22 Kg/Lbs |
| 200 watt 8" two-way speaker system with EV DH2005 hi-frequencye compression driver. 2 NL4 connectors. 90x50 coverage pattern with rotatable waveguide. Includes integrated pole mount, carrying slot and rubber feet. Black high impact polymer cabinet.
The Electro-Voice ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement.
The high-tech enclosure is lightweight and extremely durable. The enclosure geometery has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response withtout vent noise. The ZX1's long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability.
A sophisticated crossover network integrates it with the EV DH2005, a 1" exit true compression driver with extended frequency response and high output capability. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.
ALSO AVAILABLE IN WHITE |
Reviews
There are no reviews yet.