| Content | Quality 1 millisecond ahead … the LD Systems DDQ 12 active speaker.
The LD Systems DDQ 12 is an extremely high-performance 2-way active speaker for compact systems, FOH and monitor applications, delay lines, and permanent installations. The groundbreaking design and comprehensive features with leading components ensure superior performance in its class.
Trouble-free operation of the DDQ 12 is ensured by a specially programmed Sharc DSP with 24-bit/48-kHz converters that have remarkable dynamics of 127dB. It incorporates volume control, delay, EQ, crossover, phase, and all protection functions for the drivers and power amps. Heat sinks and a silent fan provide additional protection against overheating. The decisive advantage is attained by a predictive peak limiter with a look-ahead time of 1 millisecond. It guarantees absolute freedom from distortion even at maximum volume.
The DDQ 12 is loaded with a 12” Faital Pro PR300 neodymium woofer and a BMS tweeter. The asymmetrical tweeter horn offers optimal, even sound level distribution from the very first to the very last row of the audience. Its design ensures extraordinarily dynamic, linear reproduction up to 20 kHz. The two drivers are powered separately by two Class D Hypex UCD400 power stage modules with an output of 400W RMS each. They have a load-controlled, linear frequency response and extremely low total harmonic distortion with extremely low noise and, thanks to their switching power supply, maximum efficiency. The maximum sound pressure level of the DDQ 12 is 134 dB with a dispersion angle of 80° x 50°; the horizontal sound distribution is characterized by extraordinary symmetry.
The input, link, and switchable subwoofer output of the DDQ 12 take the form of XLR sockets. A ground lift switch eliminates ground loop hum, and the system functions are indicated by LEDs.
The sturdy bass-reflex enclosure is made of 15mm birch plywood with a structured coating and a front grille made of steel. There is an integral 50° angle for use as a floor monitor and the tweeter horn can be turned accordingly. It has an adjustable tilt stand mount. The innovative Evolutive handles and the low weight facilitate transport. The DDQ 12 active system is made in Germany.
Type: Active
Woofer size: 12“
Woofer size: 305 mm
Woofer impedance: 4 ohms
Woofer magnet: neodymium
Woofer brand: Faital Pro (12PR300, 4 ohms)
Woofer voice coil: 2,5“
Woofer voice coil: 63.5 mm
Tweeter size: 1“
Tweeter size: 25.4 mm
Tweeter impedance: 8 ohms
Tweeter magnet: ceramic
Tweeter brand: BMS
Tweeter voice coil: 1“
Tweeter voice coil: 25.4 mm
Dispersion angle (H x V): 80° x 50°
AD/DA converter: 24-bit / 48 kHz
DSP: Sharc
Amplifier: 2 x Class D, Hypex Ucd400
Power output (RMS): 2 x 400 W
Frequency response (Hz): 54 - 20,000 Hz
Crossover frequency: 1.500 Hz
Max. SPL (continuous): 121 dB
Max. SPL (peak): 134 dB
Protection: DSP-based "look ahead" limiter, RMS speaker limiter, RMS power supply limiter, overvoltage, overcurrent
Integral media player: no
Controls: Gain dB, x-over sub, ground lift, power switch
Indicators: Operate, signal, peak limit, X-over sub
Line inputs: XLR
Line outputs: Input Link XLR, Sub Out XLR
Cabinet material: 15mm birch plywood
Cabinet surface: PA painting
Cabinet type: bass reflex
Monitor angle: 50°
Width: 360 mm
Height: 600 mm
Depth: 378 mm
Weight: 17 kg
Features: LD SYSTEMS Evolutive handles, 36 mm stand mount, vertical tilt (SM707: ± 13,5° in seven increments)
DSP characteristics:
Bit depth AD/DA converter: 24 bits
Internal sampling frequency: 48 kHz
Signal/noise ratio: 127 dB |
- 2000W power via ultra-efficient Class-D amplification
- TruSourceTM Technology
- Mackie designed, vertically-aligned, common-magnet TruSource driver
- 12″ LF woofer / 1.75″ HF compression driver
- Incredibly compact, lightweight design
- Powerful TruSource DSP delivers seamless clarity, consistent coverage and unmatched fidelity
- DL2 Integrated Digital Mixer
- Powerful, one-touch digital mixer with bright OLED screen
- Two highly-versatile input channels with FX
- Independent channel level, 3-band EQ and effects control
- 16 great-sounding channel effects include reverb, chorus and delay
- XLR/TRS combo and dual RCA connectors
- Handles mic, line, stereo and instrument signals
- Unmatched system control for professional applications
- Multi-band feedback destroyer
- Six speaker modes deliver the perfect voicing for your application
- Alignment delay up to 300ms for delay stack, balcony, etc.
- Three memory locations for instant venue setting recall
- Smart Protect DSP dynamically protects amp/driver
- Innovative ultra-compact design
- 1/3 smaller than a traditional 2-way
- Fit an entire DLM system in nearly any car
- Stack them up for storage
- Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
- Flyable via standard M10 rigging hardware
- Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
- Roadworthy PC-ABS cabinet with pro black finish and ergonomic top carry handle
- Rugged, powder-coated 20 gauge steel grille
- Integrated kickstand delivers perfect angle for personal monitor use
- Ridiculously lightweight (31 lbs. / 14.1 kg)
|
The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications. | Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 100W Class D
Frequency Range 55Hz-20kHz (-10dB)
Crossover Frequency 1.5kHz
Maximum Peak SPL 124dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly, Wedge
Inputs 1 x XLR
Outputs 1 x XLR
Height 24“
Width 15.2“
Depth 15“
Weight 50 lbs. |
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)
|
Dimensions (H x W x D) 620 x 394 x 330 mm (24.4 x 15.5 x 13“)
Net Weight 20.5 kg (45.1 lbs)
Components 1 x 12" (305 mm) LF driver, 1 x 1" (25 mm) HF compression driver
Frequency Response 50 Hz - 18 kHz ±3 dB
Dispersion 90° H x 60° V @ -6 dB points
Calculated Max SPL 128 dB peak
Construction Injection-moulded polypropylene enclosure. Recessed carrying handles. Integral dual-angle pole mount socket
Grille Powder coated galvanised perforated steel mesh with foam backing
Connectors
Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder with integrated fuseholder
Rigging (6) M10 threaded internal rigging points
Spares & Accessories LS-1229 12" (305 mm) Replacement LF loudspeaker
RC-1229 Recone kit
CD-125 1" (25 mm) HF compression driver
RD-125 HF diaphragm
MG-M12 Metal grille
PB-55 Wall bracket, pole mount fixing
EB-10 Shoulder eyebolt
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.