Griven AD-3436 Dolomite CYM 600 575W

Griven AD-3436 Dolomite CYM 600 575W

STELVIO CYM 300, another newcomer to the architectural range, uses a new lamp, the MSD 250, which due to its short arc produces even more light output than from the HQI-TS used in the Vesuvio OS CYM 250. This projector is equipped with an optical system that produces a long throw beam of 33?°. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller or from any DMX512 control system. Remote lamp ON/OFF control and dimmer/strobe/black out functions now available.
A version of the Stelvio - STELVIO CYM 300 HFT- is available fitted with a wireless DMX receiver, for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven???s wireless DMX transmitter. See dedicated section for more information.

LAMP
250W, 18.000 lm, 6.700?° K
Discharge lamp MSD 250
Average rated life 3.000 hours
GY 9,5 base.
Ordering code LP0205
Available on request: MSA 300 lamp (250W), 4000/6000 hours, 16.000 lm, 6000?° K

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 33?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.

COOLING
An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230V, 50Hz, 1,7 Amp

EUROLITE LED BAR-12 QCL RGBA Bar - 51930396

LED bar (1,1m) with 12 x 4 watt 4in1 QCL RGBA LED

LED bar (1,1m) with 12 x 4 watt 4in1 QCL RGBA LED

• 12 powerful LEDs 4 W high-power 4in1 QCL RGBA (homogenous color mix)
• Color change adjustable; Dimmer electronic; color blend stepless
• Strobe effect
• The device is cooled by passive convection cooling
• Control via stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); W-DMX by wireless solution (optional); CRMX by LumenRadio (optional)
• Flicker-free
• With a beam angle of 17°
• With Mounting bracket
• 4 digit 7-segment LED display
• Preprogrammed in LED PC-Control 512; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE; Light Captain; Light´J
• Silent operation
• Mains input and output for power linking up to 8 units
• For application areas such as: Clubs/dancing school; Party room; restaurants, bars and hotels; small rental
• Application possibility: Suspended; Wall mounting

Package contents

• 1 x light effect, 2 x mounting bracket, 1 x power cord, 2 x knurled screw, 2 x washer, 1 x user manual

Griven AD-3233 Pantheon OS CYM 400 400W

PANTHEON OS CYM 400, which is fitted with a metal halide HQI-TS 400W 6000 hours lamp, is equipped with an optical system that produces a long throw beam of approximately 46? Alternative beam angles can be achieved by optional expansion filters.
The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system.
A version of the Pantheon - PANTHEON OS CYM 400 HFT ?¨C is available fitted
with a wireless DMX receiver, for trouble free control of large or otherwise difficult
installations where the running of DMX signal cable from the control system to
the projector could be problematic. This system requires the use of Griven's
wireless DMX transmitter. See dedicated section for more information.

LAMP
400 W, 28.000 lm, 5.600?°K
Metal halide lamp HQI-TS 400/D
Average rated life 6.000 hours
Special base
Ordering code LP1006

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Maximum ambient temperature: 35?°C.
Maximum operating temperature: 100?°C.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
A simulation of black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked - three channels of DMX per projector.

COOLING
An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230 V, 50 Hz, 2,5 Amp

Griven AD-3252 Colosseo OS CYM 1000 1000W

The high light output afforded by the HQI 1000W lamp means that COLOSSEO OS CYM 1000 can be used to light up large buildings, giving even colour coverage over a large area. The projector can be mounted in any orientation, which means, for example, that a tall building could be lit from top and bottom, or, using two pairs of units, from the middle of both sides facing towards the opposite corners. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow, and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller, or from any DMX 512 control system. A version of the Colosseo - COLOSSEO OS CYM 1000 HFT - is avaialble fitted with a wireless DMX receiver for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter. See dedicated section for more information.


LAMP
1000W, 90.000 lm, 5.900?°K
Metal halide lamp HQI-TS/D/S 1000
Average rated life 6.000 hours
Special base.
Ordering code LP1008

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I .
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.


OPTICAL GROUP
The optical system utilises an aluminium parabolic reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
A simulation of a black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked - three channels of DMX per projector.

COOLING
An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230V, 50Hz, 1,7 Amp.

Griven GR 402 Kolorjet 4000W

Architectural Colour Changer

KOLORJET is an immensely powerful outdoor colour changer with weatherproofing to a certified IP44 rating. This far advanced unit uses a Xenon 4000W lamp for an extraordinary light output which should fulfil the most demanding applications in the architectural lighting field.
The power of the lamp is enhanced by the performance of the nickel rhodium plated reflector and the CYM colour mixing system creates an almost unlimited variety of hues. These features make KOLORJET ideal for such applications as concert touring, skyscraper highlighting and movie sets, where the quality and power of a flicker free XENON lamp are required.
An electronic zoom varies the beam size, yet another feature for a unit already packed with technology and with a wide range of capabilities, and designed for absolute reliability.
On board or remote DMX512 control gives instant access to all functions, including colour mixing, frost soft edge effect, black out, strobe and stand by (reducing power and lamp consumption). Pre-programmed automatic colour sequences are also selectable and the master/slave option allows multiple units to be operated in synchrony.

Technical features 
 
- LAMP SOURCE
 
 
 Type:  XENON
 Wattage (W):  4000
 Base:  SFAX 30-9,5 SFA 30-8
 Lamp life (h):  1.000
 Lumens:  155.000
 
 
 
- COLOURS
 
 
 Color (MIX):  
 
 
- PROJECTION
 
 
 Angle:  1?°-16?°
 Zoom:  Motorised
 Dimmer:  Mechanical
 Strobe:  2 Fps
 Filters:  Frost
 
 
- OPERATION
 
 
 DMX channels:  7
 Stand alone:  
 Master / Slave:  
 On Board Control:  
 
 
- HOUSING
 
 
 Weather protection:  IP44
 Cooling:  FV
 
 
- SIZE (mm)
 
 
 Height:  1375
 Width:  715
 Depth:  680
 
 
- - WEIGHT (kg)
 
 
 Main fixture:  60 (143 ballast incl.)
 Ballast set:  83
 
 
- POWER
 
 
 Input (V):  220-380 Three-fase +N +G
 HZ:  50-60
 AMP:  9 (380V) - 17 (220V)

User\'s manual
Eco label
Photometric measurements
Daslight V3 fixtures
Fixture Library grandMA2

• Highly flexible IP65 outdoor flood light
• Ultra flexible colour mixing with rich solid, warm pastel and UV colours
• Flicker free
• 6 modes of DMX control plus master, slave and standalone applications
• 4-button display for intuitive operation
• Security lock against unauthorized menu access
• Durable compact size metal enclosure
• Screw connectors for DMX and mains input and output
• Incl. universal bracket

The Cameo FLAT PRO series FLOOD 600 IP65 is a compact RDM enabled outdoor flood light equipped with nine 12 watt 6-in-1 LEDs generating rich RGBWA colours, soft pastel hues and intense UV effects. The IP65 rated fixture sports convection cooling, a 40° beam angle and 3,000 Hz refresh rate for flicker free performance.

The hardwearing metal enclosure features 3-pin screw connectors for DMX and mains input and output plus a backlit 4-button display for easy, intuitive operation while a security lock prevents unauthorized menu access. The Cameo FLOOD 600 IP65 provides 6 modes of DMX control with dimmer and strobe functions, colour temperature correction and master, slave and standalone applications.

The multi-voltage fixture operates on 100 – 240 V AC and comes with an adjustable universal bracket for floor placement and multiple mounting options. Barn doors are available as accessory.