| Content |
- Power: 850W
- Vertical fog output over 4 m in bright RGB colors
- Control via optional radio remote control WRC-4 (not included)) or via integrated DMX512 interface, or button for manual release
- Back-lit tank with level indicator
- Optoelectronic sensor with liquid deficiency protection circuit
- Power supply: 230 V AC, 50 Hz
- Tank capacity: 2.5 l
- Output: 4 m
- Warm-up time: 3 min
- Output volume: 500 m³ / min
- Fluid consumption: 25 ml / min
- LED number: 9 (3 x red, 3 x green, 3 x blue)
- LED Type: 3W
- Dimensions (L x W x H): 290 x 255 x 185 mm
- Power consumption: 850 W
- Weight: 5 kg
- Protection class: IP20
- Fluid consumption: Approx. 25 ml / min
- Colour: Black
|
|
|
|
|
850 W |
|
|
Yes |
|
|
vertical |
|
|
No |
|
|
No |
|
|
No |
|
|
Yes |
|
|
No |
| Fluid consumption [ml/min.] |
25 ml |
|
|
No |
|
|
500 m³ |
|
Ground Fog Machine
- For producing creeping mist (low-lying fog) similar to dry ice effect
- For use with normal ice cubes or ice packs
- Eliminates the need for mist coolers, air conditioning systems or dry ice machines
- With practical timing control
- Creates professional theatre effects
- Approx. 2 kg of ice per charge will last approx. 2 hours
- Water drainage valve system: Water drains directly into the drainage bag and can easily be emptied by means of a valve placed backwards
- Heater: 700 W
- Fluid container: 1/2 litre (enough for about 2 hours of fogging)
- Dimensions: 490 x 315 x 260 mm
- Weight: 8 kg
|
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method. Main Features: 1. Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area. 2. Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning. 3. More Efficient New Heat Exchanger Design It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others. 4. New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.
Specification
» Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz » Heater : 800 W » Output : 3,000 cu.ft / min » First Heat-up Time : 100 seconds » Tank Capacity : 0.8 liter » Fluid Consumption Rate : 60 min / 0.8liter (100% Output) » Remote Included : W-1 Wireless Remote » Weight : 3.8 Kg » Dimensions (mm) : L 315 W 128 H 166 » Liquid Used : Antari FLR / FLG Liquid
| Product: Fog Fury 2000
The ADJ Fog Fury 2000 is a 1100W portable, high output fog machine with new advances in technology. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance pump system for optimum output. ADJʼs Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with no warm-up time between fog blasts.
The Fog Fury 2000 also has convenient features such as a LED heating indicator system that changes colors depending on whether the fogger is heating up, ready to use, or if the fog fluid is low.
This fogger produces 7000 cubic feet of fog per minute, has an external tank with a 2.5 Liter capacity, and has an 8 minute warm-up time. This machine uses water-based fog fluid only.
Specifications:
• 1100W portable, high output Fog Machine
• High performance pump for optimum output
• ADJʼs Electronic Thermo Sensing (ETS) technology to always maintain optimum heat levels with no warm-up times between fog blasts
• Automatic circuit cut-off to protect pump if fog fluid tank runs dry
• Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
• LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low
• Fog Output: 7000 (cu.ft/min)
• Warm-up time: 8 min.
• External fog fluid tank: 2.5 Liter
• Single yoke to mount on a wall or from trussing bracket
• Convenient carrying handle
• Includes On/Off wired remote control with 25ft./8M cable
• Heater: 1100W
• Power Consumption: 1200W max
• Power: AC 120V/60Hz or 230V/50Hz (non switching)
• Dimensions (LxWxH): 16.75” x 11.75” x 9” / 421 x 295 x 224mm
• Weight: 16 lbs. / 6.89 kg.
• Only use high quality, water-based fog fluid |
S-100-II Remote Control SC-2
Antari Fogger accessories.
|
The ZR33 Hi-Mass is a powerful and instant atmosphere generator for large clubs, stage productions, rental companies and industrial applications.
* Continuous output
* 1000 m³/min fog output
* 1500 W heat exchanger
* 8 min heat-up time
* Floor standing or truss mounting
* 9.5 liter fluid capacity
* Different fluid options for different applications
* Low fluid sensing
* Onboard DMX
* On-board control panel
* Removable panel for remote control
* Multifunctional remote control
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.