ELAC Debut SUB 2030 Powered subwoofer (Black Brushed Vinyl)

Fundamental beginnings.

An ideal subwoofer for smaller systems and rooms, the SUB 2030 plays deep, clean and loud, thanks to a 250 mm woofer and ported enclosure. 350 Watts of BASH amplification deliver tight and authoritative bass.

Speaker type: Powered subwoofer, closed box
Woofer: 1 x 250 mm cone
Frequency response: 20 to 180 Hz
Crossover frequency: 44 to 160 Hz, selectable
Amplifier Type: BASH-Tracking
Maximum amplifier power: 350 Watts Max
Standby power consumption: 1 Watt
Maximum power consumption: 480 Watts (full load)
Inputs: 2 x line-channel (RCA)
Input sensitivity: 2 x 70 mV (RCA)
Input impedance: 10 kΩ (RCA)
Cabinet finish: Matte black or white
Accessories included: AC power cable
Height: 14.0 in / 356 mm
Width: 11.8 in / 300 mm
Depth: 12.4 in / 315 mm
Net weight: 30.1 lb / 14.0 kg

Audiophiles know that recreating the very lowest frequencies is key to accurate music reproduction, and that nothing brings realism to recorded sound like deep, authoritative bass. Yet most affordable systems are compromised in this critical region. Here the rich, powerful bottom octaves are fundamental—literally—to the life of music and movie soundtracks when it comes to reproducing the full spectrum of instruments and sound effects.

ELAC subwoofers are easy to add to your existing speaker system, thanks to built-in power amplification and ELAC’s advanced control app that makes room integration a breeze. Because the low frequencies reproduced by a subwoofer are omnidirectional, it means that a subwoofer can be located most any place in your listening room and that, because of the omnidirectional dispersion pattern of the lowest notes, a single subwoofer is sufficient to reproduce the content of both stereo channels. Listeners who want even more bass output can opt one subwoofer per channel for the absolute ultimate in low-frequency slam, impact and realism.

Add an ELAC powered subwoofer to your sound system and discover what you’ve been missing.

Audio quality and power efficiency have long been at odds when it comes to amplifier design. Traditional Class AB amplifiers, which account for about 90 percent of all amplifiers made, are capable of producing prodigious power and excellent sound, but do so at the expense of efficiency. In fact, up to 50 percent of these amplifiers’ energy is wasted, dissipated as heat. Heat becomes an added liability when such amplifiers, in the case of powered subwoofers, are enclosed in a speaker cabinet. Class D switching amplifiers, on the other hand, run cool and occupy relatively little space. Compact, lightweight and efficient, they are a sensible choice for the latest applications, especially when used for powering subwoofers. Until recently, however, the sound quality achieved by typical Class D designs has not been suitable for the best audio applications, but new technology has improved these designs to compete with the best of traditional amplifier topologies.

    Pressure vessel enclosure

500W ICEpower® amplifier
Switch mode power supply
Description     Active closed-box subwoofer system
Drive unit     2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range     -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response     ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output:     500W
Rated power consumption:     110W (105W - 100V version)
Input impedance:     100kΩ
Signal / noise:     >90dB
Functions:     Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:     Line In (RCA Phono)
Speaker Level In (FCC68 4/4)

Product Series     Subwoofers
Speaker Type     Subwoofer
Frequency Range (+/-3 dB) [Hz]     28 - 190
Maximum SPL [dB]     112
Crossover Frequency [Hz]     40 - 120 Hz
Low Frequency Driver     1 x 12" long stroke  Polymere Aluminimum
Enclosure Type     Bass Reflex
Bass Reflex Tuning Frequency [Hz]     36.0
Max. Amplifier Power Output [RMS watt]     220
Continous IEC Power Output [RMS watt]     170
Input Impedance [Ω]     25K
Connection input(s)     Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding     No
Recommended Placement     Floor
Near wall or corner
Recommended Distance From Wall [cm]     > 5
Functions     Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W]     250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm]     370 x 340 x 380
Weight [kg]     14.7
Accessories Included     Manual
Rubber Bumpers
Spikes M6
Finish     Black Ash Vinyl
Light Walnut Vinyl
White Vinyl

The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality

 Features

        Rigid MDF cabinet
        70W RMS amplifier
        8-inch long-throw woofer
        Individual controls to tailor volume, crossover frequency and phase adjustment

 Sensitivity    180mV for full power output
Frequency response    34Hz - 150Hz
Rated output power    70W
Drive units    1 x 8" (203mm) long throw woofer
Crossover    50 - 150Hz continuous/active
Max. power consumption    100W
Colour    Black
Dimensions (WxHxD)    300 x 300 x 310mm (11.8 x 11.8 x 12.2“)
Weight    7.7kg (17lbs)

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18 Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output    650 watts Continuous. 1200 watts (peak)
Amplifier Classification    D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation    4 Settings (Off/Music/Movie/Impact)
Phase Control    0-90-180-270 degrees
Auto Sensing Input Level Requirements    Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level    -60 to +10dB in 1dB increments
Drive Unit Complement    1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input    3.5mm mono jack socket
Connections    Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance    20 kohms
Dimensions (H x W x D)    430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth    28 mm (1 1/8 Inches)
Weight (unpacked)    35.3 kg (77.6 lbs)
Mains Input Voltage    100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption    Maximum 1000W. Standby Fuse Type    20mm UL/VDE (Value is region specific)
IR Remote Control Code    NEC SH6122