Edifier R1280T Black 21W x 2 Dual RCA input

 Total power output:21W x 2
Signal to noise ratio:85dBA 
Input sensitivity:PC: 750mV ± 50mV | Aux: 550mV ± 50mV
Distortion:0.05% 
Audio input:Dual RCA input (RCA - RCA and RCA to AUX)
Adjustment:Volume, bass and treble adjustment, remote control
Subwoofer / bass unit:4 inch (106mm) Magnetically shielded, 6Ω
Tweeter unit:13mm silk domed tweeter, Magnetically shielded, 4Ω
Weight:4.9Kg Net  |  5.65Kg Gross
Dimension:146mm x 234mm x 196mm (WxHxD)

Two way, bass-reflex
Woofer 130 mm. (5“)
Coated paper
Tweeter 28 mm.
Soft dome (silky fabric)
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 120W
Efficiency: 89 dB/W/1m
Dimensions: 200x270 Weight: 7,5 Kg
Finishing:solid walnut

The PL100 is a truly compact, wideband speaker capable of expressing the entire micro-dynamic texture of every performance. A rigid cabinet construction, proprietary bracing techniques and advanced damping technologies combine to provide the optimum environment for its wonderfully accurate and detailed C-CAM ribbon tweeter and its lightening-fast, precision-engineered RDT bass driver. The PL100 will draw a rich, natural radiance from the most demanding of music and film scores and reproduce the power and scale of dramatic passages with a breathtaking fidelity

1 x 6.5” RDT® Bass/mid-range driver
1 x C-CAM® high frequency ribbon transducer
Ported. HiVe® II technology
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather.
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Optional dedicated floor stands are available

Frequency Response: 42 Hz - 100 KHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 50 - 120 W
Bass Alignment: Ported
HiVe II Technology
Mid / H.F Crossover Frequency: 2800 Hz
Bass Low Pass Crossover Frequency: N/A
Drive Unit Compliment: 1 x 6.5" RDT Bass/mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand (H x W x D): 370 x 225 x 285 mm
(14 9/16 x 8 7/8 x 11 1/4 inch)
Stand External Dimensions -
(H x W x D): 615 x 340 x 365 mm
(24 3/16 x 13 3/8 x 14 3/8 inch)
Weight (each) Excluding stands: 13 Kg (28.6lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Frequency Response: 80 Hz - 35 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance: 8 Ohms
Power Handling Single (RMS): 60 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 10 - 100 W
Maximum SPL (dBA): 105
Bass Alignment: Bass reflex - rear ported
Drive Unit Complement: 1 x 100mm (4“) MMP®II cone mid-bass driver.
1 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 198 x 125 x 140 mm
(7 13/16 x 4 15/16 x 5 1/2)
Weight (each):
Kg (lbs) 2 (4 3/8)

Item    Value
System Format:     2 Way
Frequency Response:     55 Hz - 60 kHz
Sensitivity (1W@1M):     86 dB
Nominal Impedance:     8 ohms
Maximum S.P.L
(Per pair in room):     109.8 dBA
Power Handling (RMS):     100 W
Recommended Amplifier Requirements (RMS):     50 - 100 W
Bass Alignment:     Bass reflex. HiVe port system
Crossover Frequency:     2.3 kHz
Drive Unit Compliment:     1 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)
    300 x 170 x 263 mm
(11 13/16 x 6 11/16 x 10 3/8 inch)
Weight (each) Excluding stands:     

7.5 Kg (16.5 lbs)

Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red