Crown XLI 2500 The Crown XLI 2500 is a reasonably priced, but robust and powerful power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the […]
The Crown XLI 2500 is a reasonably priced, but robust and powerful power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 2500 offers a robust an analog circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel).
Crown XLI 2500:
Reasonably priced, robust and powerful power amplifier
Robust and analog circuit
LED display for each channel for signal, clip and error
Stereo, bridge and parallel modes
Conventional power supply
Performance: 2 x 520 Watt an 8 Ohm, 2 x 800 Watt an 4 Ohm
Inputs: Cinch, XLR
Outputs: 2 x speakon, spring clip
Robust 19 inch housing
Height: 2 U
Specifications
XLi800
XLi1500
XLi2500
XLi3500
Channels
2
2
2
2
Sensitivity (full rated power at 8 ohms)
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted)
> 100 dB
> 100 dB
> 100 dB
> 100 dB
Total Harmonic Distortion (THD) (20Hz – 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB)
= /
= /
= /
= /
Frequency Response (at 1W, 20Hz – 20kHz)
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
Crosstalk (below rated power)
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 20kHz: – 59 dB
at 20kHz: – 59 dB
at 20kHz: – 59 dB
at 20kHz: – 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms)
> 200
> 200
> 200
> 200
AC Line Voltage and Frequency Configurations (± 10%)
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
Dimensions (H x W x D)
3.5″ x 19″ x 12.4“
3.5″ x 19″ x 12.4“
3.5″ x 19″ x 12.4“
3.5″ x 19″ x 14.4“
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 366mm)
Net Weight
25.1 lb (11.4 kg)
28.0 lb (12.7 kg)
29.7 lb (13.5 kg)
43.0 lb (19.5 kg)
Net Shipping Weight
29.5 lb (13.4 kg)
32.4 lb (14.7 kg)
34.2 lb (15.5 kg)
47.4 lb (21.5 kg)
Weight
10.00 kg
Reviews
There are no reviews yet.
Be the first to review “CROWN XLi-2500 Power Amplifier 2x750W/4Ω-500W/8Ω-1Χ1500W bridge 8Ω 2U Rack” Cancel reply
Crown XLI 2500
The Crown XLI 2500 is a reasonably priced, but robust and powerful power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 2500 offers a robust an analog circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel).
Crown XLI 2500:
Reasonably priced, robust and powerful power amplifier
Robust and analog circuit
LED display for each channel for signal, clip and error
Stereo, bridge and parallel modes
Conventional power supply
Performance: 2 x 520 Watt an 8 Ohm, 2 x 800 Watt an 4 Ohm
Inputs: Cinch, XLR
Outputs: 2 x speakon, spring clip
Robust 19 inch housing
Height: 2 U
Specifications
XLi800
XLi1500
XLi2500
XLi3500
Channels
2
2
2
2
Sensitivity (full rated power at 8 ohms)
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted)
> 100 dB
> 100 dB
> 100 dB
> 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB)
= /
= /
= /
= /
Frequency Response (at 1W, 20Hz - 20kHz)
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
Crosstalk (below rated power)
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms)
> 200
> 200
> 200
> 200
AC Line Voltage and Frequency Configurations (± 10%)
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
Dimensions (H x W x D)
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 14.4“
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 366mm)
Net Weight
25.1 lb (11.4 kg)
28.0 lb (12.7 kg)
29.7 lb (13.5 kg)
43.0 lb (19.5 kg)
Net Shipping Weight
29.5 lb (13.4 kg)
32.4 lb (14.7 kg)
34.2 lb (15.5 kg)
47.4 lb (21.5 kg)
Crownʼs new CTs series of power amplifiers are remarkable for their loud, punchy sound; sustained, tight bass; and superior protection against overheating and overload. This paper explains the design features behind those advantages. After reading this information, youʼll know why Crown CTs amps sound better than the competition. CTs amplifiers can provide large amounts of power into various loads, such as 2, 4, 8 ohms and 70V. With most power amps, the maximum output power tends to drop as the load impedance increases. But with the CTs series, the power stays the same at almost any impedance. 2-ohm Dual (per Ch.) 250W 4-ohm Dual (per Ch.) 600W 8-ohm Dual (per Ch.) 600W 16-ohm Dual (per Ch.) 300W 70V Dual (per Ch.) 600W 4-ohm Bridge 500W 8-ohm Bridge 1200W 16-ohm Bridge 1200W 140V Bridge 1200W Crown switching power supply for less weight Sustained Power on long-duration signals due to regulated, "stiff” power supplies with incredible energy storage (huge filter capacitors). Extra Hidden Power during high-level transients and during incomplete use of all the channels. Overheating and overload protection thanks to the sophisticated TLC circuitry which compresses the signal only when needed. Compression is controlled not by temperature, but by signal voltage. This keeps the loudness up during compression more than with competitive amps.
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.