Content |
REF : CC KX6-375P2
Quality Cable
PRICE PER METER
High Quality AUDIO(or DATA) – VIDEO – POWER CABLE MADE IN FRANCE
Composite cable: 1 coaxial cable 75 Ω (KX6) + 2 shielded data pairs 0.34 mm² + 3G0.75 mm² feeders. Black PVC outer sheath.
Construction
COAXIAL CABLE:
- INNER CONDUCTOR: stranded bare copper (7 x 0.20 mm nom.)
- DIELECTRIC: Foam PE (Ø = 3.70 mm nom.)
- SHIELD: copper braid (Coverage > 69%)
- SHEATH: green or black PVC Ø = 6.15 mm nom.
DATA PAIRS:
- CORE: bare copper 0.34 mm²
- INSULATION: PE - Ø = 1.15 mm nom.
- COLOUR: blue and white
- SHIELD: tinned copper drain wire + Al/PES tape.
- SHEATH: blue PVC - Ø = 3.0 mm
POWER CABLE:
- CORE: flexible stranded bare copper S = 0.75 mm².
- INSULATION: PVC- Ø = 2.1 mm nom.
- COLOUR: black – red – green/yellow
- SHEATH: grey PVC - Øext = 6.10 mm nom.
GENERAL ASSEMBLY: {1 coaxial cable 75 Ω + 2 pairs 0.34 mm² + 1 cable 3G0.75 mm²} + synthetic fillers under a PES tape + rip cord.
MARKING: CC KX6-375P2 + Batch number
Electrical properties
COAXIAL CABLE:
Inner conductor electrical resistance:
Outer conductor electrical resistance:
Impedance @ 200 MHz: 75 ± 3 Ω.
Capacitance: 67 pF/m nom.
Attenuation at 20°C:
Velocity of propagation: 66 %
DATA PAIRS:
Operating voltage: 100 V.
Electrical resistance at 20°C:
Test voltage (1 min. / 50 Hz): 1500 V
Mutual capacitance: 125 pF/m nom.
POWER CABLE:
Operating voltage: 230 V
Test voltage: 2000 V
Electrical resistance at 20°C:
Insulation resistance: > 100 MΩ.km
Working temperature: - 20°C Æ +70 °C
Acc. to the RoHS standard
Fire behaviour:
C2 acc. to IEC 60332-1 / NFC32070
|
24 AWG stranded (7x32) TC conductor, polyolefin insulation, individually shielded Beldfoil?
(100% coverage) numbered/color-coded PVC jackets, jackets and shields bonded to strip
simultaneously, overall Beldfoil shield and 24 AWG TC drain wire.
PHYSICAL CHARACTERISTICS :
CONDUCTOR :
Number of Pairs: 8
Total Number of Conductors: 16
AWG: 24
Stranding: 7x32
Conductor Diameter: .024 in.
Conductor Material: TC - Tinned Copper
INSULATION :
Insulation Material: PO - Polyolefin
Nom. Insulation Wall Thickness: .008 in.
Insulation Diameter: .040 in.
Lay Length: 1.75 in.
Twists/ft.: 6.85
Pair Color Code Chart: Red & Black
INNER SHIELD :
Inner Shield Material Trade Name: Beldfoil?
Inner Shield Type: Tape
Inner Shield Material: Aluminum Foil-Polyester Tape
Inner Shield % Coverage: 100 %
Inner Shield Drain Wire AWG: 24
Inner Shield Drain Wire Stranding: 7x32
Inner Shield Drain Wire Conductor Material: TC - Tinned Copper
INNER JACKET :
Inner Jacket Material: PVC - Polyvinyl Chloride
Inner Jacket Nominal Wall Thickness: .014 in.
Inner Jacket Diameter: .111 in.
OVERALL CABLING : Overall Cabling Color Code Chart:
Number Color
1 Brown
2 Red
3 Orange
4 Yellow
5 Green
6 Blue
7 Purple
8 Gray
OUTER SHIELD :
Outer Shield Material Trade Name: Beldfoil?
Outer Shield Type: Tape
Outer Shield Material: Aluminum Foil-Polyester Tape
Outer Shield %Coverage: 100 %
OUTER SHIELD DRAIN WIRE :
Outer Shield Drain Wire AWG: 18
Outer Shield Drain Wire Stranding: 7x26
Outer Shield Drain Wire Conductor Material: TC - Tinned Copper
OUTER JACKET :
Outer Jacket Material: PVC - Polyvinyl Chloride
Outer Jacket Nominal Wall Thickness: .033 in.
Outer Jacket Ripcord: Yes
OVERALL NOMINAL DIAMETER :
Overall Nominal Diameter: .452 in.
MECHANICAL CHARACTERISTICS :
Operating Temperature Range: -35°C To +75°C
Bulk Cable Weight: 103.5 lbs/1000 ft.
Max. Recommended Pulling Tension: 152 lbs.
Min. Bend Radius (Install): 4.5 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE :
APPLICABLE STANDARDS :
NEC/(UL) Specification: CM
CEC/C(UL) Specification: CM
EU CE Mark (Y/N): Yes
EU RoHS Compliant (Y/N): Yes
EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004
PLENUM/NON-PLENUM :
Plenum (Y/N): N
ELECTRICAL CHARACTERISTICS :
Nom. Inductance: .18 ?H/ft
Nom. Capacitance Conductor to Conductor @ 1 KHz: 31 pF/ft
Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 58 pF/ft
Nominal Velocity of Propagation: 66 %
Nom. Conductor DC Resistance @ 20 Deg. C: 23.3 Ω/1000 ft
Ind. Pair Nominal Shield DC Resistance @ 20 Deg. C: 15.9 Ω/1000 ft
Max. Operating Voltage - UL: 300 V RMS
Max. Recommended Current: 1.05 Amps per conductor @ 25°C
NOTE:Price per meter
| Is exactly the cable all "bending radius fetishists", such as live technicians, musicians, and ambitious live sound people have been dreaming of! The QUANTUM is absolutely torsion-free, i.e. it can be wound in the shape of an "8" without any problems and will not twist when it is wound or unwound. Not only the S-PVC-jacket, resistant to a temperature of -30 °C and notchresistant, feels soft but the inside as well, and is also break-resistant due to the super fine 0.07 mm (!) individual copper litz and the PE-insulated wire insulation. The electrical and mechanical data also is remarkable: each wire pair is additionally insulated with a sleeve, numbered, and shielded with a copper spiral covered to 99 %. Get a taste of this: The QUANTUM stands out with a low capacity of 45 pF wire/wire and remains 110 Ohms (AES/EBU) conform for hundreds of meters! The wire pair diameter is perfectly suitable for direct installation (e.g. a XLRconnector). The inside is protected against adverse influences by a highly flexible PVC-jacket with a wall thickness of almost 2 mm. There never has been a cable with the same electrical and mechanical values atsuch a low price!
Center conductor cross section
0.14 mm²
Center conductor material
copper
Center conductor construction
36 x 0.07 mm
Number of internal conductors
16
Line resistance
<90 Ohm(s)
Additional information
Inner conductors shielded in pairs, AES/EBU-compliant
| A P P L I C A T I O N
Analogue audio
Fixed installations
Audio transmissions in noisy environment
Wiring in professional sound studios
P R O D U C T A D V A N T A G E S
Very good protection against electromagnetique interferences
thanks to individually shielded pairs and overall shield
T E C H N I C A L D A T A
NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Tinned copper
CONDUCTOR INSULATION: PE
SHIELDING BY PAIR: Aluminium polyester foil + drain wire
COLOR OF CONDUCTEUR: White / blue
COLOR OF PAIR: By number
OVERALLSHIELD: Aluminium polyester foil + drain wire
JACKET: Black PVC
PACKAGING: Per m
SUITABLE PLUG: XLR, jacks
PRICE PER METER |
A P P L I C A T I O N
Analogue audio
Any analogue audio transmissions as well in fixed installations as on stage
or broadcast
These highly flexible multi-pairs are destined to mobile applications
P R O D U C T A D V A N T A G E S
High flexibility
Transmission on important lengths due to 0,22 mm2
Facility of wiring thanks to conductors cross section colored
and numbered pairs
T E C H N I C A L D A T A
NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Bare copper
COMPOSITION: 28 x 0,10 mm
CONDUCTOR INSULATION: Polyolefin
SHIELDING BY PAIR: Bare copper spiral
COLOR OF PAIR: See board
JACKET: Black PVC
PACKAGING: Per m
SUITABLE PLUG: XLR, jack, cinch
PRICE PER METER
|
24 AWG stranded (7x32) TC conductor, polyolefin insulation, individually shielded Beldfoil? (100% coverage) numbered/color-coded PVC jackets, jackets and shields bonded to strip simultaneously, overall Beldfoil shield and 24 AWG TC drain wire. PHYSICAL CHARACTERISTICS :
CONDUCTOR : Number of Pairs: 24 Total Number of Conductors: 48 AWG: 24 Stranding: 7x32 Conductor Diameter: .024 in. Conductor Material: TC - Tinned Copper INSULATION : Insulation Material: PO - Polyolefin Nom. Insulation Wall Thickness: .008 in. Insulation Diameter: .040 in. Lay Length: 1.75 in. Twists/ft.: 6.85 Pair Color Code Chart: Red and Black INNER SHIELD : Inner Shield Material Trade Name: Beldfoil? Inner Shield Type: Tape Inner Shield Material: Aluminum Foil-Polyester Tape Inner Shield % Coverage: 100 % Inner Shield Drain Wire AWG: 24 Inner Shield Drain Wire Stranding: 7x32 Inner Shield Drain Wire Conductor Material: TC - Tinned Copper INNER JACKET : Inner Jacket Material: PVC - Polyvinyl Chloride Inner Jacket Nominal Wall Thickness: .014 in. Inner Jacket Diameter: .111 in. Inner Jacket Color Code Chart: Number Color 1 Brown 2 Red 3 Orange 4 Yellow 5 Green 6 Blue 7 Purple 8 Gray 9 White 10 Black 11 Tan 12 Pink 13 Gray/Brown Number Color 14 Gray/Red 15 Gray/Orange 16 Gray/Yellow 17 Gray/Green 18 Gray/Blue 19 Gray/Purple 20 Gray/Gray 21 Gray/White 22 Gray/Black 23 Gray/Tan 24 Gray/Pink OUTER SHIELD : Outer Shield Material Trade Name: Beldfoil? Outer Shield Type: Tape Outer Shield Material: Aluminum Foil-Polyester Tape Outer Shield %Coverage: 100 % OUTER SHIELD DRAIN WIRE : Outer Shield Drain Wire AWG: 18 Outer Shield Drain Wire Stranding: 7x26 Outer Shield Drain Wire Conductor Material: TC - Tinned Copper OUTER JACKET : Outer Jacket Material: PVC - Polyvinyl Chloride Outer Jacket Nominal Wall Thickness: .065 in. Outer Jacket Ripcord: Yes OVERALL NOMINAL DIAMETER : Overall Nominal Diameter: .807 in. MECHANICAL CHARACTERISTICS : Operating Temperature Range: -35°C To +75°C Bulk Cable Weight: 263.5 lbs/1000 ft. Max. Recommended Pulling Tension: 418.4 lbs. Min. Bend Radius (Install): 8 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE : APPLICABLE STANDARDS : NEC/(UL) Specification: CM CEC/C(UL) Specification: CM EU CE Mark (Y/N): Yes EU RoHS Compliant (Y/N): Yes EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004 PLENUM/NON-PLENUM : Plenum (Y/N): N
ELECTRICAL CHARACTERISTICS : Nom. Characteristic Impedance: 50 Ω Nom. Inductance: .18 ?H/ft Nom. Capacitance Conductor to Conductor @ 1 KHz: 31 pF/ft Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 58 pF/ft Nominal Velocity of Propagation: 66 % Nom. Conductor DC Resistance @ 20 Deg. C: 23.3 Ω/1000 ft Ind. Pair Nominal Shield DC Resistance @ 20 Deg. C: 15.9 Ω/1000 ft Max. Operating Voltage - UL: 300 V RMS Max. Recommended Current: 1.05 Amps per conductor @ 25°C NOTE:Price per meter |
Reviews
There are no reviews yet.