Content |
Features: Eight channel / four way split per channel Channels linkable up to 1 in, 32 out Ultra low noise design 'SilentSwitch' Phantom Power switching ?20 dB pad switch 0 to +40 dB Gain available via rear switches Headphone monitoring and PFL metering Electronically Balanced Inputs and Outputs (standard) Transformer balanced Outputs option Intuitive, 'user friendly' layout Flawless audio performance
EC-2 Superb Audio Quality Active microphone and line signal splitting has a number of benefits over using passive splitters: primarily these are improved sound quality, noise figures comparable to the best microphone inputs, and increased resistance to RFI. About the MSX 32 With these benefits in mind, the ARX MSX 32 Active Microphone/Line Splitter has been developed to deliver the performance required by the increasing complexity of today?s standards of audio production. The MSX 32 consists of eight channels of actively buffered ultra low noise Microphone/Line Splitter. Each of these channels has four electronically Balanced splits ? two outputs on the rear panel for Main and Monitor, plus two more output splits on the front panel. All splits have the option of transformer balancing if so specified.Each channel has a ?20 dB pad switch plus silently switchable 48V Phantom power with indicator LED. A PFL switch and 6 LED metering enables each channel to be easily checked with headphones for signal monitoring, and also for line tracing when troubleshooting. Gain through the MSX 32 can be set individually by the small DIP switches on the rear of each channel, from 0dB through to +40 dB in 10 dB stepsA ?Link? switch links each channel to the previous one, providing an ultimate maximum of 32 Outputs from a single input. An indicator LED shows when this is active. A Clip LED indicates imminent signal overload through the channel, and a numbered marker panel on the front provides a space where individual channel connections can be noted. Number stickers are provided to give each channel an individual number for up to 40 channels when multiple MSX32s are being used.Internally, powerful RF input filtering removes both common mode and differential interference at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components throughout. Advanced user options include internally jumper linking Inputs to Main outputs, and Ground lifting Output Pins 1 as required. Internal Power Supply The MSX 32?s internal toroidal transformer based power supply is triple shielded to get the maximum benefit from the ultra low noise design of the splitter circuitry. An illuminated power switch on the front panel provides visual confirmation of AC power connection to the unit.The headphone output and the 6 LED PFL metering are both mounted on the right hand side of the front panel. Rear panel connectors enable this function to be linked when using multiple MSX 32 units. To sum up, this feature packed two RU device is the answer wherever transparent signal buffering and routing is required.
T E C H N I C A L S P E C I F I C A T I O N S Signal / Noise Ratio -94dB Distortion .008% 20Hz - 20KHz Gain through unit Switchable 0, +10, +20, +30, +40 dB Maximum Output +24dB Pad Switch ?20dB attenuation Phantom Power +48VDC slow turn on/turn off Output Impedance 100 Ohms Electronically Balanced (Optional Transformer balancing available) Clip LED 1dB before clipping Headphone Output 2 watts/8 ohms AC Mains Input Fused IEC socket AC Power 100-120V AC 2 amp 220-240V AC 1 amp Transformer Type Low noise shielded toroidal Size 2 RU - 19?W x 3½?H x 8?D, 482 x 89 x 200 mm Weight E model - 15 lbs (7 Kg) | Practical distributor with 1 input and 6 outputs
- Extends every mixer with additional outputs
- 1 stereo XLR input
- 6 stereo zone outputs (XLR)
- Each zone with level control and mono switch
- LED display of signal input and mono/stereo mode
- Rack installation with 1 U
- (19") 48.3 cm rack installation 1 U
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
7 W |
S/N ratio: |
>69 dB |
THD: |
<0.2 % at 1 kHz |
Power connection: |
Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) |
Impedance: |
Input 45.1 kOhm
Output 125 Ohm |
Gain: |
15 dB |
Max. level: |
Output: +22 dB
Input: +9 dBV |
Color: |
Silver |
Housing design: |
(19") 48.3 cm rack installation 1 U |
Dimension: |
Width: 48.3 cm
Depth: 12.6 cm
Height: 4.45 cm |
Weight: |
2.15 kg |
| 1231 Dual 31-Band Graphic Equalizer
The dbx? 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis.
SPECIFICATIONS:
INPUT |
Connectors: |
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
Type: |
Electronically balanced/unbalanced, RF filtered |
Impedance: |
Balanced 40 kOhm, unbalanced 20 kOhm |
Max Input Level: |
>+21dBu balanced or unbalanced |
CMRR: |
>40dB, typically >55dB at 1kHz |
OUTPUTS |
Connectors: |
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
Type: |
Impedance-balanaced/unbalanced, RF filtered |
Impedance: |
Balanced 200 ohm, unbalanced 100 ohm |
Max Output Level: |
>+21dBu balanced/unbalanced into 2 kOhm or greater
>+18dBm balanced/unbalanced (into 600 ohm) |
SYSTEM PERFORMANCE |
Bandwidth: |
20Hz to 20kHz, +0.5/-1dB |
Frequency Response: |
50kHz, +0.5/-3dB |
|
+/-15dB range |
+/-6dB range |
Dynamic Range: |
109dB |
115dB |
Signal-to-Noise: |
90dB |
97dB |
THD + Noise: |
|
| Bring a more professional sound to your mix
Adding a dbx® 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments.
dbx knows compressors...after all we invented them! The 266xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Features
- Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Great sounding dynamics control for any type of program material
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Stereo or dual-mono operation
- Balanced inputs and outputs on 1/4" TRS and XLR connectors
- Side Chain insert
- Classic dbx® "Auto" mode
Specifications
Input Connectors |
1/4" TRS and female XLR (pin 2 hot) |
Input Type |
Electronically balanced/unbalanced, RF filtered |
Input Impedance |
40kΩ balanced/unbalanced |
Max Input |
>+22dBu Balanced or Unbalanced |
Output Connectors |
1/4" TRS, female XLR (pin 2 hot) |
Output Type |
Impedance-balanced/unbalanced, RF filtered |
Output Impedance |
+4dBu: 100Ω balanced, 50Ω unbalanced; -10dBu: 1kΩ balanced, 500Ω unbalanced |
Max Output |
>+21dBu balanced/unbalanced into 2kΩ or greater; >+18dBm balanced/unbalanced (into 600Ω) |
Sidechain |
1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) |
Sidechain Impedance |
Tip = >10kΩ (Input), Ring = 2kΩ (Output) |
Sidechain Max Input Level |
Tip = >+22dBu (Input) |
Sidechain Max Output Level |
Ring = >+20dBu (Output) |
Compressor Threshold Range |
-40dBu to +20dBu |
Compressor Threshold Characteristic |
Selectable OverEasy® or hard knee |
Compressor Ratio |
1:1 to Infinity:1 |
Compressor Attack Time |
Scalable Program-Dependent AutoDynamic™ |
Compressor Release Time |
Scalable Program-Dependent AutoDynamic™ |
Expander/Gate Threshold Range |
-60dBu to +15dBu |
Expander/Gate Ratio |
1:1 to 4:1 |
Expander/Gate Attack Time |
|
|
Features: Two channel / four way split Channels linkable for 1 in, 8 out Ultra low noise design ?SilentSwitch? Phantom Power switch ?20 dB pad switch 0 to +40 dB Gain available via rear switches Electronically Balanced Inputs and Outputs (standard) Transformer Balanced Outputs option 12 VDC supply connector for remote or mobile applications Intuitive, 'user friendly' layout Flawless performance in any audio environment
Today?s venues face a growing need to provide a multiplicity of audio feeds from presentations, conferences, orchestral performances and lectures. The advent of digital broadcasting, the growth of webcasts and direct-to-CD archiving highlight the deficiencies in audio splitting systems more than ever before. Whether the final product is a broadcast feed or CD sales of an unrepeatable lecture, performance or event, end-users? expectations of audio quality are higher than ever.With these requirements in mind, ARX has developed the MSX 8 Active Microphone/Line Splitter to deliver the performance required by today?s standards of audio production. Active microphone and line splitting has a number of benefits over passive splitters: primarily these are improved sound quality, noise figures comparable to the best microphone inputs, and increased resistance to RFI. All of which translate into superb audio quality for your clients. About the MSX 8 The MSX 8 consists of two channels of actively buffered ultra low noise Microphone/ Line Splitter. Each of these channels has four electronically Balanced splits ? two on the rear panel, plus two more on the front panel. All four output splits have the option of transformer balancing if so specified.Each channel has a ?20 dB pad switch plus silently switchable 48V Phantom power with indicator LED.Gain through the MSX 8 can be set individually by the small DIP switches on the rear of each channel, from 0dB through to +40 dB in 10 dB stepsA ?Link? switch links Channel 1 to Channel 2, providing an ultimate maximum of 8 Outputs from a single input. An indicator LED shows when this is active. A Clip LED indicates imminent signal overload through the channel, and a numbered marker panel on the front provides a space where individual channel connections can be noted.For remote or mobile applications a 5 pin DIN connector on the rear panel provides an access point to connect a 12V DC power supply Inside Information Internally, powerful RF input filtering removes both common mode and differential interference at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components throughout.Advanced user options include internally jumper linking Inputs to Main outputs, and Ground lifting Output Pins 1as required. Internal Power Supply The MSX 8 has a low noise transformer based power supply to obtain the maximum benefit from the ultra low noise design of the splitter circuitry. Summing up, the feature packed MSX 8 is the answer wherever transparent signal buffering and routing is required. T E C H N I C A L S P E C I F I C A T I O N S Signal / Noise Ratio -94dB Distortion .008% 20Hz - 20KHz Gain through unit Switchable 0, +10, +20, +30, +40 dB Maximum Output +24dB Pad Switch ?20dB attenuation Gain Switch +20dB gain Phantom Power +48VDC slow turn on/turn off Output Impedance 100 Ohms Electronically Balanced (Optional Transformer balancing available) Clip LED 1dB before clipping 12 Volt Connector 5 pin DIN AC Mains Input Fused IEC socket AC Power 100-120VAC 2 amp, 220-240VAC 1 amp Transformer Type Low noise toroidal Size 19?W x 1??H x 6?D, 482 x 44 x 125 mm Weight 5 lbs (2.2 Kg)
Front Panel A and B balanced XLR Output splits Channels 1 and 2. Pin 3?-, Pin 2 +, Pin 1 Ground 48V Phantom Power switch and LED Channel link switch and LED switch ?20dB pad switch Numbered marker panel for labelling individual channel assigns AC power LED Rear Panel Channel Gain DIP switches: 0, +10, +20, +30, +40dB Balanced XLR Input Channels 1 and 2. Pin 3 ?, Pin 2 +, Pin 1 Ground Balanced XLR Main (FOH) Output (same wiring as Input) Channels 1 and 2 Balanced XLR Monitor Output (same wiring as Input) Channels 1 and 2 12 Volt DC power supply input for remote or mobile applications IEC 3 pin AC connector and integral fuseholder. Replace fuse with correct value only: 100?120 V AC 2 amp, 220?240 V AC 1 amp |
1215 Dual 15-Band Graphic Equalizer
The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
|
Reviews
There are no reviews yet.