Content | Replacement stylus for AIWA , SHARP turntables and more.
Quality aftermarket replacement turntable needle
Specs:
Spherical Diamond Tip needle 0.7 mil
Tracking Force: 1.5 - 2.5 grams
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: Red
ST 29D SANYO (6883) = ST 29D FISHER (7314)
Works with:
Sanyo – Fisher STG-9, ST-44D, Sanyo ST44D, Sanyo ST-G11, Sanyo ST-G9,
Sanyo ST-G11, Sanyo ST-G9, Sanyo G2005, GXT200, GXT210, P73, STG10, STG11, STG9, STG9, STG10, STG11, W73.
Sanyo Cartridges: MG-9, Sanyo MG-1710, Sanyo MG-9, Sanyo MG-17, Sanyo MG-10
Fisher Cartridges M-1510, IM-1510, Fisher MG-9, Fisher MG-10, Fisher R-S07450,
Sharp STY-147, Sharp STY-148, Sharp STY-149, Sharp STY-147, Sharp STY-149, Sharp STY-149, Sharp 203EF, 570EE, RP201E, STY 147 STY149, STY143, STY147, STY149, STY161, 190E, 201E, 203E, 570E, RP210E, RP8H.
Cartridges Sharp 143.
Toshiba N-77C, PX-10, PXE-10, PX-220, V-200, V-200L, V-210, V-R100, V-W100, V-S30, AN-10, AN-20, AN-10, Toshiba PX-10 Toshiba PX-220, Toshiba V200, Toshiba V-200L, Toshiba V-R100, Toshiba V-W100, Toshiba V-S30, Toshiba N77C, SLX1, X1, N51D, N50D, N51D,
Cartridges Toshiba C-77.
Denon DSN-57, EV 3095D,
Nagatron CN-104, Nagatron CN-106,
Nagaoka C501M_P, C502M-P< C503M-P, C51M, C55M, NT500M
Aiwa AN10, AN20, B200, PX220, PXE10, PXE30, V100, V200, V2100, Aiwa AN-10, Aiwa AN-20.
Amstrad CD1000, CD2000, CN213, TS90, TS99
CEC CN104, CN106, CN211, CN213, CN220, CN221
Chuo Denki CN104, CN106, CN211, CN213, CN220, CN221
Columbia DSN57, DSN66
Japan Columbia DSN57, DSN66
Darling M22, Denon DSN57, DSN6
Grundig 404
Goldring Elektra D125E
Harksound CN104, CN106, CN211, CN213, CN220, CN221
KEnwood N-51MKIII, V-51
Optonica 201E, 203E, 203EF, 570E, 570EE, RP201E, RP210E, RP8H, STY143, STY147, STY149, STY161
Otto G2005, GXT200, GXT210, P73, STG10, STG11, STG9, W73
Piezo YM818
Saisho SCM8000L, VIP1100L
Samsung SCM8000L, SCM8100, VIP330L, VIP550L
Sansui MIDI35, PR500
Tatung TMD5701, TXT5000
Thompson M22 …Record Turntable Needle For NEEDLES FISHER STG-10, PFANSTIEHL 736-D7, SANYO, STG=10, SANYO STG-11, SANYO STG11
These are high-quality replacement styluses that are in no way inferior to the original.
Note: Please identify your stylus from the illustrations. The designations differ considerably depending on the manufacturer and only refer to the most commonly used types. The color is not decisive, it is important that the design matches.
| Stylus 2M Red
Technical data |
|
Frequency range |
20-22.000 Hz |
Frequency response |
20-20.000 Hz + 3 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,6-2,0 g (16-20 mN) |
Tracking force, recommended |
1,8 g (18 mN) |
Tracking angle |
20° |
Stylus colour |
Red |
|
|
Recommended for following cartridges |
2M Red |
*) Typical value | Stylus 3E
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-18.000 Hz + 2 / - 3 dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value | Stylus 305
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-18.000 Hz + 2 / - 3 dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
spherical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,5-2,0 g (12,5-20 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Grey |
|
|
Recommended for following cartridges |
Series 305 Universal |
*) Typical value | DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
Stylus 40
Technical data |
| Frequency range | 20-30.000 Hz | Frequency response | 20-30.000 Hz + 2 / - 3 dB | Tracking ability at 315Hz at recommended tracking force *) | 90 µm | Compliance, dynamic, lateral | 25 µm/mN | Stylus type | Nude FG 70 | Stylus tip radius | r/R 5/70 µm | Equivalent stylus tip mass | 0,3 mg | Tracking force range | 1,25-1,75 g (12,5-17,5 mN) | Tracking force, recommended | 1,5 g (15 mN) | Tracking angle | 20° | Stylus colour | Black |
| | Recommended for following cartridges | OM 40, OM 40 GOLD | *) Typical value |
Reviews
There are no reviews yet.