ANTARI ICE-101 Low Fog Machine with Remote Control or DMX

Floor fog machine with remote control or DMX, ice cube cooling

• Stand-alone fogger with 8 kg capacity ice chamber
• Creates a heavy ground fog by means of fluid and crushed ice
• Operation with dry ice possible
• Continuous output
• Rugged metal housing
• Drainage pump for melted water
• Adjustable timer with interval, duration and output volume, continuous output, manual activation
• Short warm-up time
• Output distance: Approx. 6 m
• Control via DMX; wired remote control
• Operates on water-based fluid
• Removable tank
• For application areas such as: Video and photography; Wedding/gala/events; theater
• Application possibility: Standing

Package contents

• 1 x device, 1 x user manual, 1 x power cord, 1 x remote control, 1 x container, 1 x tube, 1 x filter

Removable tank
Optoelectronic low fluid detector
Efficient heat exchanger provides for 20 % more fog than comparable fog machines and ensures low fluid consumption
Activation via handy transmitter or integrated DMX interface
The transmitter allows simultaneous control of an unlimited number of machines of the W series
Large operating range from -20° to +60° C
Power supply:     230 V AC, 50 Hz ~
Power consumption:     1000 W
Output volume:     10000 cft/min. (approx. 283 m³/min.)
Tank capacity:     2.8 liters
Fluid consumption:     13 min./liter
Warm-up time:     12 min.
DMX512 connection:     3-pin XLR
Dimensions (LxWxH):     468 x 250 x 148 mm
Weight:     11.4 kg
Remote included:     W-1
Carrier frequency:     UHF 433.920 MHz
Battery:     12 V, type A27
Range:     approx. 50 m

The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method. Main Features: 1. Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area. 2. Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning. 3. More Efficient New Heat Exchanger Design It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others. 4. New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.

Specification

» Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz » Heater : 800 W » Output : 3,000 cu.ft / min » First Heat-up Time : 100 seconds » Tank Capacity : 0.8 liter » Fluid Consumption Rate : 60 min / 0.8liter (100% Output) » Remote Included : W-1 Wireless Remote » Weight : 3.8 Kg » Dimensions (mm) : L 315 W 128 H 166 » Liquid Used : Antari FLR / FLG Liquid

Ground Fog Machine

• For producing creeping mist (low-lying fog) similar to dry ice effect
• For use with normal ice cubes or ice packs
• Eliminates the need for mist coolers, air conditioning systems or dry ice machines
• With practical timing control
• Creates professional theatre effects
• Approx. 2 kg of ice per charge will last approx. 2 hours
• Water drainage valve system: Water drains directly into the drainage bag and can easily be emptied by means of a valve placed backwards
• Heater: 700 W
• Fluid container: 1/2 litre (enough for about 2 hours of fogging)
• Dimensions: 490 x 315 x 260 mm
• Weight: 8 kg

JEM Air Force 2, The AF-2 is a high output fully DMX (3 + 5 pin) controllable fan. It has been designed with theme parks, stage applications and theatres in mind. With its massive power it easily projects smoke over long distances, works as a wind effect or simply converts smoke or fog into haze. Very high output, Fan speed 0 - 1,380rpm, Airflow: 6,500m³/h, Fan casing constructed from aluminum sheet for minimal weight, only 17kg!, 3 & 5 pin DMX as standard, Multifunctional controller, Very high quality sealed fan motor designed to withstand high condensation levels associated with close proximity fog, Aluminum hanging bracket allowing 360° rotation, compatible with the Omega clamp system.