AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones.
AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones.
AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones. Lyra has four selectable capture modes—Front, Front + Back, Tight Stereo and Wide Stereo—making it capable of capturing audio in a variety of applications and up to 24-bit/192kHz high-resolution audio. AKG K371 professional studio headphones combine performance, accuracy and supreme comfort in a compact, folding design that’s ideal for production in the studio or on location. K371s are precision-engineered to match AKG’s
Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail.
The package includes: 1 x USB-C to USB-A cable, 1 x 1.2 m (2.5) straight headphone cable, 1 x 3.0 m (9.8) straight headphone cable, 1 x 3.0 m (9.8) coiled headphone cable, 1 x 3.5 mm (1/8/”) to 6.5 mm (1/4/”) headphone adapter, 1 x Dual-headphone adapter (supports two headphone connections), 1 x Protective headphone carrying pouch
Specifications (Microphone)
Type: Condenser
Polar Pattern: Front, Front & Back, Tight Stereo and Wide Stereo
Frequency Response: 20 to 20,000 Hz
Microphone Bit Depth/Sample Rate: 24-bit/192 kHz
Max SPL: 129 dB SPL (0.5% THD)
Microphone Power Requirement / Consumption: 5V USB / 75 mA
Output Connection: USB 2.0
Headphone Output Impedance: 16Ω
Headphone Power Output (RMS): 43 mW
Headphone Frequency Response: 20 Hz – 22 kHz
Microphone Headphone Output S/N Ratio: 98.0dB
Specification (Headphones)
Headphone Type: Closed Back
Driver Size: 50mm
Voice Coil: Pure OFC voice coil
Frequency Response: 5 Hz – 40 kHz
Sensitivity (SPL): 114 dB SPL/V @ 1 kHz
Impedance: 32 ohms
Weight: 255g
Weight
1 kg
Reviews
There are no reviews yet.
Be the first to review “AKG PODCASTER ESSENTIALS (LYRA + K 371)” Cancel reply
AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones.
Content
AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones. Lyra has four selectable capture modes—Front, Front + Back, Tight Stereo and Wide Stereo—making it capable of capturing audio in a variety of applications and up to 24-bit/192kHz high-resolution audio. AKG K371 professional studio headphones combine performance, accuracy and supreme comfort in a compact, folding design that’s ideal for production in the studio or on location. K371s are precision-engineered to match AKG’s
Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail.
The package includes: 1 x USB-C to USB-A cable, 1 x 1.2 m (2.5) straight headphone cable, 1 x 3.0 m (9.8) straight headphone cable, 1 x 3.0 m (9.8) coiled headphone cable, 1 x 3.5 mm (1/8/") to 6.5 mm (1/4/") headphone adapter, 1 x Dual-headphone adapter (supports two headphone connections), 1 x Protective headphone carrying pouch
Specifications (Microphone)
Type: Condenser
Polar Pattern: Front, Front & Back, Tight Stereo and Wide Stereo
Frequency Response: 20 to 20,000 Hz
Microphone Bit Depth/Sample Rate: 24-bit/192 kHz
Max SPL: 129 dB SPL (0.5% THD)
Microphone Power Requirement / Consumption: 5V USB / 75 mA
Output Connection: USB 2.0
Headphone Output Impedance: 16Ω
Headphone Power Output (RMS): 43 mW
Headphone Frequency Response: 20 Hz – 22 kHz
Microphone Headphone Output S/N Ratio: 98.0dB
Specification (Headphones)
Headphone Type: Closed Back
Driver Size: 50mm
Voice Coil: Pure OFC voice coil
Frequency Response: 5 Hz – 40 kHz
Sensitivity (SPL): 114 dB SPL/V @ 1 kHz
Impedance: 32 ohms
Weight: 255g
3/4-inch Cardoid Condenser Microphone
The NT3 is a versatile end-address 3/4-inch condenser microphone that provides incredible detail on almost any sound source you can imagine, from drums to guitar amps to vocals. Intended for studio, stage and location work, the NT3 is ideal for use on a stand or boompole, or as a handheld mic. It features a rugged all-metal body and durable mesh head to ensure it is well protected in the studio or in the field, and can be powered either by P48 phantom power or a 9V battery for added flexibility.
Key Features:
Versatile 3/4-inch cardioid condenser microphone
Full frequency response
Internal capsule shock mounting
Powered either by P48 phantom power or a 9V battery for added flexibility
10-year warranty
Specifications
Acoustic & Electrical Specifications
Acoustic Principle : Pressure gradient
Active Electronics : JFET impedance converter with bipolar output buffer
Capsule : 0.75"
Capsule : Cardioid
Address Type : End
Frequency Range : 20Hz - 20kHz
Output Impedance : 200Ω
Output Impedance : 140dB SPL
Maximum Output Level : 9.5mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity : -39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Box Contains
1 x NT3 - microphone
ZP1 - 1 x ZP1 - pouch
RM3 - 1 x RM3 - Mic Clip
C 568 B
Compact, short shotgun microphone
Integrated, switchable bass cut filter minimizes mechanical noise
Operates on phantom power
High directivity and wide frequency response in a relatively short shotgun make this
microphone a perfect tool for theater, sound reinforcement, and film/TV applications.
Due to its compact and lightweight design, the C 568 B is ideal for camera mount
applications. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz
the acoustic interference tube introduces increasing directivity. A switchable 12 dB/
octave 120 Hz bass cut filter effectively suppresses rumble and wind noise. The rugged,
all-metal body contains the built-in preamp. Phantom powering (9?52 V) required; foam
windscreen and stand adapter included.
SPECIFICATIONS:
Polar pattern hypercardioid/directional
Frequency range 20 to 20,000 Hz
Sensitivity 11 mV/Pa (-39 dBV)
Max. SPL 128 dB
Equivalent noise level (CCIR 468-3) 29 dB
Equivalent noise level 18 dB-A
Signal/noise ratio 76 dB
Bass filter 12 dB/octave at 120 Hz
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption
The ME 62 is an omni-directional microphone head suitable for K6 and K6P
powering modules. It can be used for reporting, discussions and interviews.
The ME 62 is particularly suitable for good reproduction of 'room' ambience
and 'spaced omni' stereo recording. Matt black, anodised, scratch-resistant finish.
Features
Omni-directional pick-up pattern
Minimal inherent self-noise
Excellent rejection of rumble, wind and handling noise
Wide frequency response
High maximum sound pressure level
Integral pop filter
Delivery Includes
1 ME 62
Technical Data
Pick-up pattern omni
Sensitivity in free field, no load (1kHz) 31 mV/Pa +- 2,5 dB
Nominal impedance 200 Ohm (K6)
Min. terminating impedance 1000 Ohm (K6)
Equivalent noise level 15 dB
Equivalent noise level weighted as per CCIR 468-3 27 dB
Dimensions d 22,5 x 94 mm
Weight 30 g
Technical specifications
Polar pattern
cardioid
Frequency range
50 to 20,000 Hz
Sensitivity
20 mV/Pa (?34 dBV)
Max. SPL
125 dB (k=1 %)
Equivalent noise level
21 dB-A
Signal/noise ratio (A-weighted)
73 dB
Impedance
600 ohms
Recommended load impedance
>2000 ohms
Supply voltage
9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)
Current consumption
Connector
Discreet Acoustics Modular standard
Finish
matte dark gray
Dimensions
13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)
Net weight
5 g (0.17 oz.)
Shipping weight
88 g (3.1 oz.)
Accessories (included)
W 30
The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.
Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.