ADAM S6X Active Studio Monitor 500W

PRICE PER UNIT

ΤΙΜΗ ΤΕΜΑΧΙΟΥ

Main Monitors: S6X & S7A Mk2

The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive
concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.

Advanced DʽAppolito-array

The arrangement of the seven discrete drivers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitorʼs new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:

• There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
• The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120dB are handled without offending the ear.

Impulse Coupling

In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff Aluminum honeycomb plate (=IC).

Amplifiers

Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies (=PWM).

These are combined in an extremely powerful (1000 and 1500W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs.

The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.

The S6X: accuracy and power

The S6X is one of the most ambitious studio monitors available today. They can be found in some of the highest profile studios in the industry, from elite private studios to world class jazz, from rock and orchestral tracking and mixing facilities to high powered hip hop production rooms. The concept of the horizontal symmetry of the drivers is greatly affected by the generous proportions of the larger diaphragms, resulting in both exceptionally flat frequency response and extremely realistic dynamic reproduction across the entire audio spectrum. Numerous controls at the front panel allow detailed adaptations to different acoustic environments.

This main monitor offers very high accuracy and power in sheer abundance. SPL peaks beyond 120 dB are produced without any compression or harshness. The S6X is a top shelf choice for larger control rooms and film or sound studios.

Control panel (S6X & S7A Mk2)

Numerous controls on the front panel introduce a new degree of control for main monitors. Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200Hz) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.

In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.

Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.

A second switchable input on the front allows servicing without moving the unit.

All LED indicators can be dimmed if necessary.

• Drivers: 8.75" bass speaker and 1" tweeter
• Frequency response: 50 - 21,000 Hz
• Two built-in power amplifiers - total power 265 W
• Separately controlled limiters for bass and treble
• Magnetically shielded
• Filter for room adjustment
• Connections: XLR and jack balanced
• Dimensions (W x H x D): 250 x 400 x 290 mm
• Weight per monitor: approx. 15 kg

The Genelec 1032B is a powerful two-way active monitoring system including magnetically shielded drivers, speaker enclosure, multiple power amplifiers and active low signal level crossover.

Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.

ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.

Capable of producing peak SPL of over 120 dB per pair, and with a low frequency response extending down to 35 Hz, the 8050B is a powerful wideband bi-amplified monitoring system.

Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.

ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.

It is an excellent tool for large recording studios, broadcast and surround installations, mastering suites and TV and post-production houses.

The sophisticated low level active crossover has versatile controls for matching the monitor to difficult acoustic environments.

Dedicated very low distortion amplifiers power the drivers, with overload protection for each driver.

The stiff, volume efficient MDETM (Minimum Diffraction EnclosureTM) enclosure and long, curved, flow optimized reflex port combined with low distortion drivers provide solid, clear, low frequencies with a minimum of compression, distortion and port noise artifacts.

The gently curved sided and front MDETM enclosure and advanced Genelec Directivity Control WaveguideTM (DCWTM) provide exceptionally smooth on and off axis frequency responses, precise imaging and optimal directivity across the whole audio spectrum.

Mounting of the 8050B is easy using the included Iso-PodTM(Isolation Positioner/DecouplerTM) which eliminates coloration of the sound by decoupling the monitor from its mounting surface. The monitor can be tilted on the Iso-PodTM to point the acoustic axis directly at the listening position.

Other mounting options are possible using the integrated mounting point on the rear of the enclosure, or the M10 threaded hole on its base.

The Genelec 8260A 3-way DSP system is a masterpiece in electro-acoustic design which features major advances in audio driver technology integrated to a sophisticated enclosure design.

Genelec MDCTM Minimum Diffraction Coaxial Mid/High driver technology takes a big step in perfecting audio quality in professional active studio monitors.

This breakthrough in coaxial driver design provides more accurate imaging and improved sound quality both on the acoustical axis as well as off-axis.

The extremely smooth frequency response leads to outstanding clarity and definition of the inner details of the music.