Left extremity piece for the Defender Wheel Chair Ramp The main elements of the ramp (25cm) and the side elements (9cm) make a variable crossover width (minimum 80cm) possible. The components can simply be interconnected and then laid over the crossover. As it is the case with all crossovers of the DEFENDER series, the extremity […]
Left extremity piece for the Defender Wheel Chair Ramp
The main elements of the ramp (25cm) and the side elements (9cm) make a variable crossover width (minimum 80cm) possible. The components can simply be interconnected and then laid over the crossover.
As it is the case with all crossovers of the DEFENDER series, the extremity pieces are oil, acid, and petrol resistant.
We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.
The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.
1 Set is composed of:
6 Ramp pieces (3 Lines)
4 extremity pieces (2 left extremities / 2 right extremities)
1 blue pre-drilled Midi cable crossover
Please note:
The Defender Wheelchair Ramp does not support vehicle traffic.
DEKRA Certificate [3,70 MB]
Users Manual – Defender Series [19,77 MB]
Weight
0.63 kg
Reviews
There are no reviews yet.
Be the first to review “DEFENDER 85307R Wheelchair Ramp – Right Extremity Piece” Cancel reply
Left extremity piece for the Defender Wheel Chair Ramp
The main elements of the ramp (25cm) and the side elements (9cm) make a variable crossover width (minimum 80cm) possible. The components can simply be interconnected and then laid over the crossover.
As it is the case with all crossovers of the DEFENDER series, the extremity pieces are oil, acid, and petrol resistant.
We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.
The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.
1 Set is composed of:
6 Ramp pieces (3 Lines)
4 extremity pieces (2 left extremities / 2 right extremities)
1 blue pre-drilled Midi cable crossover
Please note:
The Defender Wheelchair Ramp does not support vehicle traffic.
Small but sturdy. Light, professional and universally applicable, with the familiar black and yellow design. The new Defender Mini meets every expectation for professional cable protection, expanding the Defender series with a very light (only 5 kg!), compact cable crossover, capable of supporting vehicle traffic.
Featuring three cable ducts and a cable cross-section of 35 mm², with an overall height of 48 mm, although used primarily indoors, this crossover can readily support car traffic, due to the load-bearing capacity of more than 2 tons.The bottom of the Defender Mini has a non-slip surface, to ensure an optimal grip on the widest variety of surfaces. Like all of the Defender series crossovers, the Defender Mini is resistant to oils, acids, and petrol, and has a patented self-cleaning hinged closure.
Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
Length: 100 cm
Width: 29 cm
Height: 4.8 cm
Channels: 3
Width Channels: 35 mm
Height Channels: 30 mm, 35 mm, 30 mm
Material: PU (polyurethane)
Shore A hardness: 88 ± 4
Flammability class: B2
Operating temperature: -30°C to +60°C
Load-bearing capacity: approx. 2 tons, for a surface area of 20 cm x 20 cm
DEKRA certified - Certified product safety
Weight 4,65 Kg
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
Defender Office BLACK
Cable Duct 4-channel black
Data Sheet
Dekra Certificate
Technical Drawing
Defender Brochure
User's manual
non-slip, ultra-flat cable protector made of recyclable polyurethane for indoors
zigzag connector system, pre-drilled mounting holes, cutting guides for shortening
4 channels: 2 channels each 10 x 10 mm and 12 x 12 mm
complies with German workplace accident prevention regulations (§ 3 A1 ArbStättV)
fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
resistant to oil, acids, solvents, and petrol
dimensions 87 x 12 x 2 cm; Weight 1.24 kg
reliable protection for cables and personnel
available in black (Item No. 85160), grey (Item No. 85160GREY) and yellow (Item No. 85160YEL)
Curves and end ramps for flexible cable protection are available as accessories
Office black
4 Mini Channels - Indoor & Design Solution Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.
Product type
Cable Protectors
Type
4 Channels
Length
870 mm
Width
120 mm
Height
21 mm
Channels
4
Width channel 1
10 mm
Height channel 1
10 mm
Width channel 2
12 mm
Height channel 2
12 mm
Width channel 3
12 mm
Height channel 3
12 mm
Width channel 4
10 mm
Height channel 4
10 mm
Material
polyurethane
Max. load
Office crossover
Fire protection class
B1
Weight
1,24 kg
Special feature
DEKRA-certified
Small but sturdy. Light, professional and universally applicable, with the familiar black and yellow design. The new Defender Mini meets every expectation for professional cable protection, expanding the Defender series with a very light (only 5 kg!), compact cable crossover, capable of supporting vehicle traffic.
Featuring three cable ducts and a cable cross-section of 35 mm², with an overall height of 48 mm, although used primarily indoors, this crossover can readily support car traffic, due to the load-bearing capacity of more than 2 tons.The bottom of the Defender Mini has a non-slip surface, to ensure an optimal grip on the widest variety of surfaces. Like all of the Defender series crossovers, the Defender Mini is resistant to oils, acids, and petrol, and has a patented self-cleaning hinged closure.
Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
Length: 100 cm
Width: 29 cm
Height: 4.8 cm
Channels: 3
Width Channels: 35 mm
Height Channels: 30 mm, 35 mm, 30 mm
Material: PU (polyurethane)
Shore A hardness: 88 ± 4
Flammability class: B2
Operating temperature: -30°C to +60°C
Load-bearing capacity: approx. 2 tons, for a surface area of 20 cm x 20 cm
DEKRA certified - Certified product safety
Weight 4,65 Kg
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
End Ramp for 85160 Cable Duct 4-channel
End ramp for Defender Office
The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.
Product type
Cable Protector Accessories
Type
End Pieces
Material
polyurethane
Colour
Black
Length
90 mm
Weight
0,078 kg
5 Medium Channels - The Solution for Nearly Anything The Defender® MIDI cable protection system has been designed for maximum routing versatility and secure crossing. Featuring a low profile, 5 t per 20 x 20 cm load capacity, integrated connectors and handles the straight ramp, 45° curve and end ramps are easily linked to form a continuous cable guard while five 34 x 36 mm channels allow for individual sound, lighting and power line arrangement. Defender® MIDI cable protectors are ideal for a multitude of usages such as heavy wheeled traffic, construction sites, warehouses, carnivals, fairs, trade shows, exhibitions, shopping malls, broadcasting and music events.
heavy-duty,non-slip all-round cable protector made of black, recyclable polyurethane with built-in carrying handles
yellow polyethylene lid with high warning effect and secure closure
patented, self-cleaning lid hinge
5 channels 34 x 36 mm
load bearing capacity approx. 5 t / 20 cm²
fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
resistant to oil, acids, solvents, and petrol
dimensions 89 x 54.2 x 5.2 cm; Weight 11.5 kg
reliable protection for cables and personnel for indoor and outdoor use
also available with pre-drilled mounting holes with a blue lid (Item No. 85300BLUE)
curves and end ramps for flexible cable protection are available as accessories
Product type
Cable Protectors
Type
5 Channels
Length
89 mm
Height
52 mm
Width
542 mm
Channels
5
Width channel 1
34 mm
Height channel 1
36 mm
Width channel 2
34 mm
Height channel 2
36 mm
Width channel 3
34 mm
Height channel 3
36 mm
Width channel 4
34 mm
Height channel 4
36 mm
Width channel 5
34 mm
Height channel 5
36 mm
Material
polyurethane
Max. load
approx. 5t on a surface area of 20 x 20 cm
Chemical resistance
acid-resistant , oil-resistant , petrol-resistant
Hardness range
88 Shore ± 4 A Shore
Fire protection class
B2
Temperature range
-30°C to +60°C °C
Weight
11,5 kg
Special feature
DEKRA-certified
Label your cable crossovers!Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.