Content | Tonar 546-DE Stylus For Pickering XV-15 400
The Tonar stylus for the Pickering XV-15/400E phono cartridge features a highly polished elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality.
Specs:
Polished Elliptical Diamond Tip 0.3 x0.7 mil
Tracking Force : 1 - 2 grams
Stylus Color: Black
Made in Japan
Fits the following models:
Stylus:
Pickering 750, Pickering 4507-AC, Pickering D100, Pickering D100 Red dot, Pickering D-1200,
Pickering D-625, Pickering D-400, Pickering D-200, Pickering D-140, Pickering D -350,
Pickering D-350, Pickering D-100, Pickering 750E, Pickering 4507-ACE, Pickering D-100E,
Pickering D100 BLUE dot, Pickering D-1200E, Pickering D-625E, Pickering D-400E, Pickering D-200E ,
Pickering D-140E, Pickering D-350E, Pickering D-350EE, Pickering D-100EE
Cartridges:
Pickering XV15 / AC, Pickering XV15 / 1200E DCF1200, Pickering XV15 / 100, Pickering XV15 / 150,
Pickering DCF150, Pickering DCF-150 , Pickering XV15AME, Pickering DCF-400, Pickering DCF400,
Pickering XV15 / 140E, Pickering XV15 / 200E, Pickering XV15 / 625E, Pickering XV15 / 750E, Pickering XV15 / 1200E.
Recommend around 20 hours of run in before the new stylus will perform at its best.
Pickering/Stanton compatibility
Pickering XV-15 series is technically and mechanically identical to the Stanton 680/681 series. That means that if a specific Pickering needle with for example an elliptical tip is out of stock, you can choose the equivalent Stanton stylus.
Pickering V-15 series is equivalent to the Stanton 500 series and the styli are interchangeable. The cartridges are based on the moving iron technique.
Pickering XV-15 series is equivalent to the Stanton 68X series and the styli are interchangeable. The cartridges are based on the moving iron technique.
Pickering XSV series is equivalent to the Stanton 881 series. The cartridges are based on moving magnet technique.
Note: This needle was installed on the following turntable models when they were sold.
If the original cartridge has been replaced with a different type, this needle won’t fit.
Match your old needle to the picture before you make a purchase. |
ORTOFON 530MKII βελόνα
Frequency range 20-25.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 30 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 530 Mkll, 530, 530 P |
| Stylus 5 Spherical
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-15.000 Hz ± 2 dB
|
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
15 µm/mN |
Stylus type |
spherical |
Stylus tip radius |
R/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,75-2,25 g (17,5-22,5 mN)
|
Tracking force, recommended |
2 g (20 mN)
|
Tracking angle |
20° |
Stylus colour |
Black |
|
OM 5,OMB 5, LMA 5, SMB 5 |
*) Typical value | Stylus 2M Black
Technical data |
|
Frequency range |
20-31.000 Hz |
Frequency response |
20-20.000 Hz + 2 / - 0 dB |
Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
Compliance, dynamic, lateral |
22 µm/mN |
Stylus type |
Nude Shibata |
Stylus tip radius |
r/R 6/50 µm |
Tracking force range |
1,4-1,7 g (14-17 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
2M Black |
*) Typical value | DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
Stylus 40
Technical data |
| Frequency range | 20-30.000 Hz | Frequency response | 20-30.000 Hz + 2 / - 3 dB | Tracking ability at 315Hz at recommended tracking force *) | 90 µm | Compliance, dynamic, lateral | 25 µm/mN | Stylus type | Nude FG 70 | Stylus tip radius | r/R 5/70 µm | Equivalent stylus tip mass | 0,3 mg | Tracking force range | 1,25-1,75 g (12,5-17,5 mN) | Tracking force, recommended | 1,5 g (15 mN) | Tracking angle | 20° | Stylus colour | Black |
| | Recommended for following cartridges | OM 40, OM 40 GOLD | *) Typical value |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.