| Content |
Τελικός ενισχυτής 4Χ500W/4Ω, δυνατότητα bridge λειτουργίας (1000W /8Ω), είσοδοι balanced με phoenix connectors, έξοδοι barrier strip, ύψος 1U, δυνατότητα για 4 διαφορετικές εισόδους. Mε μετασχηματιστή γραμμής 100V για σταθερού voltage γκαταστάσεις. Κατάλληλος για μόνιμες εγκαταστάσεις. 6,8Kg. |
Ολοκληρωμένος ενισχυτής PA 120 WRMS, με μετασχηματιστή εξόδου 100V, με 3 mic& 2 AUX input, phantom power, high/low ρυθμιστικό EQ & priority mute στο mic 1, βάρος 10.8 kg. Εφαρμογές: σε εγκαταστάσεις 100V, μικρά καφέ, καταστήματα, εργοστάσια, κ.α.
| Specification |
|
|---|
| Power Source | 220 - 240V AC or 24V DC | | Rated Output | 120W | | Power Consumption | 124W (EN60065), 260W(AC operation at rated output, 8A (DC operation at rated output) | | Frequency Response | 50 - 20,000Hz (+/- 3 dB) | | Distortion | Under 1% at 1kHz,1/3 rated power | | Input | MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1) | | Output | SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:83W (100V)
LOW IMPEDANCE: 4Ω (22V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack | | Phnatom Powe | DC + 21V (MIC 1) | | S/N Ratio | Over 60dB | | Tone Control | Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz | | Muting | MIC1: Mutes other signals by 0 - 30 dB attenuation | | Indicator | Power signal, peak | | Finish | Panel: ABS resin, black/Case: Steel plate, black | | Dimensions | 420 (W) x 100.9 (H) x 360.3 (D) mm | | Weight | 10kg |
|
Ενισχυτής 5 μεγαφωνικών ζωνών, 120W [RMS] 100V 6 μικροφώνων, τροφοδοσία phantom, EQ 5 περιοχών 1 mic priority, τόνος chime, remote control power, δυνατότητα τοποθέτησης των module pam cd., pam tuner, βάρος 17 kg. Κατάλληλος για ναούς, ξενοδοχεία , καταστήματα κ.λ.π. |
• Rack-mounting amps-preamps with a power of 120/340/480W, 100V/70V line or low impedance for PAM-120A.
• They are fitted with 6 preamplifiers including a bass/midrange/ treble adjustment and a separate adjustment of input level (microphone or line).
• A key located on all inputs allows operation of a Phantom power supply to connect an electret microphone on each input.
• A key located on the first two inputs enables to give priority to such inputs by fading.
• These devices are also fitted with a 4-tone chime that can be remote controlled with a microphone station, a master input and an L/S line selector.
• For the sound quality to be refined, keys located at the front panel enable to adjust the level of each input individually, the "general” bass/treble level as well as the general level.
Features:
• 6 Mic/line inputs (3 pin XLR)
• 2 Module option slots
• Link input (¼” jack)
• Amp input (¼” jack)
• Pre amp out (¼” jack)
• External chime (screw terminal)
• Zone mic interface (15 pin D-type)
• External mute (screw terminal)
• Individual EQ per input channel
• Individual phantom power (per mic input)
• Priority mic 1, mic 2 (switchable)
• 5 Zone loudspeaker selector
• Bar graph VU metre
• Optional 19” rack kit (BKT-PAM)
• 3U high
• Emergency message facility
- MODULAR DESIGN
Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-120A/340A/480Aʼs audio capabilities.
- INDIVIDUAL INPUT GAIN CONTROLS
Rear-panel gain controls for each input channel for total control of individual levels.
- SPEAKER SELECT
Six speaker select switches enable you to select any combination of up to five speakers.
- SELECTABLE PRIORITY MUTING
Switchable audio signal priority for Channels 1 and 2, Chime and Telephone input over other input sources.
- REMOTE CONTROL INPUT (only PAM-340A/480A)
Individual speaker zones can be selected and chime can be operated by wired remote control.
- ANNOUNCEMENT CHIME
Convenient four-tone chime for use with announcements.
- EM(EMERGENCY) - OPTIONAL EMERGENCY VOICE IC (only PAM-340A/480A)
When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.
|
Rated Output Power
|
PAM-120A(THD 1%) : 120W (RMS)
PAM-340A(THD 3%) : 340W (RMS)
PAM-480A(THD 3%) : 480W (RMS)
|
|
Frequency Response
|
|
Amp In
|
80Hz~20kHz
|
|
Link In
|
80Hz~15kHz
|
|
CH1~CH6
|
120Hz~8kHz
|
|
Remote In
|
120Hz~8kHz(PAM-340A, PAM-480A)
|
|
T.H.D.(at 1kHz Rated Output)
|
Less than 1%(PAM-120A)
|
|
T.H.D.(at 1kHz Half Power Output)
|
Less than 0.5%(PAM-340A, PAM-480A)
|
|
S/N
|
|
Amp In
|
Better than 90dB(PAM-120A)
Better than 88dB(PAM-340A/480A)
|
|
Link In
|
Better than 65dB
|
|
CH1~CH6
|
Better than 50dB
|
|
Remote In
|
Better than 50dB(PAM-340A/480A)
|
|
Input Sensitivity/Impedance
|
|
CH1~CH6
|
|
TRIM VR -60dB Position
|
1mV/10kΩ
|
|
TRIM VR -16dB Position
|
158mV/10kΩ
|
|
Link In
|
100mV/10kΩ
|
|
Amp In
|
1V/47kΩ(PAM-120A)
1V/20kΩ(PAM-340A/480A)
|
|
Remote In
|
1V/10KΩ(PAM-340A/480A)
|
|
Speaker Output/Impedance
|
PAM-120A : 120W/4Ω, 70V/42Ω, 100V/83Ω
PAM-340A : 340W, 100V/29.4Ω
PAM-480A : 480W, 100V/20.8Ω
|
|
Preamp Output/Impedance
|
1V/600Ω
|
|
Tone Control (100Hz, 10kHz)
|
±12dB
|
|
CH1~CH6 EQ Control (100Hz, 1kHz, 10kHz)
|
±12dB
|
|
|
|
|
< GENERAL >
|
|
|
Power Source
|
100–120VAC or 220V–240VAC; 50/60Hz, 24V DC(only PAM-120A)
|
|
|
(Supplied AC mains transformer depends on country requirements)
|
|
Power Consumption
|
PAM-120A : 135W(1/8 POWER), 200W(1/3 POWER), 300W(FULL POWER)
PAM-340A : 260W(1/8 POWER), 400W(1/3 POWER), 620W(FULL POWER)
PAM-480A : 360W(1/8 POWER), 550W(1/3 POWER), 880W(FULL POWER)
|
|
Weight
|
PAM-120A : 13kg/28.7lb
PAM-340A : 13.5kg/29.7lb
PAM-480A : 15.5kg/34.2lb
|
|
Dimensions
|
420(W) x 132(H) x 360(D)mm/16.5(W) x 5.2(H) x 14.2(D)in
|
|
Operation Temperature
|
14F~104F (-10°C~+40°C)
|
※ Specifications and design subject to change without notice.
| | |
- BRING DISTRIBUTED AUDIO TO YOUR SYSTEM
Transforms the 4ω output of the inter-m qd-4240/4480/4960 to a 70v or 100v output level for use with high-impedance speaker systems.
- FLEXIBLE OPERATION
Four independent channels allow for four mono or two stereo zones.
- EXPANDABLE AND ADAPTABLE
Line out expansion port for additional ot-4240/4480/4960 units.
| | | | | |
|
-ELECTRICAL
| |
|
OT-4240
|
OT-4480
|
OT-4960
| |
Rated Output
|
25V(10.4Ω),70V(10.4Ω), 25V(10.4Ω)
|
25V(5.2Ω), 70V(40.8Ω), 100V(83.3Ω)
|
70V(20.4Ω),
100V(41.6 Ω)
| |
Input
|
4Ω/60W
|
4Ω/120W
|
4Ω/240W
| |
Frequency Response
|
20Hz~20kHz
| |
| |
- GENERAL
| |
Weight
|
11.5kg/25.3lb
|
14.5kg/32lb
|
21.5kg/47.4lb
| |
Dimensions
|
482(W)X88(H)X310(D)㎜ / 19(W)X3.5(H)X12.2(D)in
|
482(W)X132(H)X310(D)㎜ / 19(W)X5.2(H)X11(D)in
|
※ Specifications and design subject to change without notice. | | |
|
Τελικός ενισχυτής 2 x 120W/100V, λειτουργία
και με 24V, κατάλληλο και για πλοία.
- HIGH POWER, LOW DISTORTION
120W of RMS power with less than 1% THD.
- ADVANCED PROTECTION CIRCUITRY
Thermal and current overload protection, power-on delay and automatic idling circuitry for component and loudspeaker protection.
- BATTERY BACKUP
Can be powered by 24VDC battery for emergency backup and true portability.
- SLIM DESIGN, COMPACT SIZE
Streamlined design fits in a compact 3RU space.
|
PA- 2312
|
|
Rated Output (RMS, THD 1%, 1kHz)
|
120W
|
|
Input Sensitivity/Impedance
|
1V/10kΩ, Balanced
|
|
T.H.D
|
Less than 1%
|
|
S/N
|
Better than 95dB
|
|
High Pass Filter
|
-3dB at 400Hz
|
|
Channel Separation
|
Less than –70dB
|
|
Output Voltage/Impedance
|
EC, JAPAN: 4Ω/22V, 41Ω/70V, 83Ω/100V
|
USA/CANADA: 4Ω/22V, 5.2Ω/25V, 41Ω/70V
|
|
Power Source
|
100–120VAC or 220–240VAC; 50/60Hz, 24VDC
|
|
Power Consumption(1/8 Power)
|
290W
|
|
Weight
|
20Kg/44.1Ib
|
|
Dimensions
|
482(W) x 132(H) x 280(D)mm/19(W) x 5.2(H) x 11(H)in
|
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.