SENNHEISER ME-67 Kάψα elecret super shotgun

Kάψα elecret super shotgun, 40Hz-20kHz

• Τύπος κάψας : lobar
• Ευασισθησία σε ελεύθερο πεδίο, χωρίς φορτίο (1kHz) : 50 mV/Pa +- 2,5 dB
• Αντίσταση : 200 Ohm (K6)
• Τερματισμένη αντίσταση : 1000 Ohm (K6)
• Σχετικό επίπεδο θορύβου : 10 dB
• Διαστάσεις : d 22,5 x 343 mm
• Βάρος : 100 g

ΠΡΟΕΝΙΣΧΥΤΗΣ ''BLUE LINE SERIES'', ΑΠΟΚΡΙΣΗ ΣΥΧΝΟΤΗΤΑΣ 20ΗZ-20KHZ. ΡΥΘΜΙΖΟΜΕΝΟ GAIN -10 dB ΚΑΙ LOW CUT 75HZ. PHANTOM POWER 9-52V. ΣΥΝΔΥΑΖΕΤΑΙ ΜΕ ΤΙΣ ΚΑΨΕΣ CK 91, CK 92, CK 93, CK 94, CK 97-O, CK 97-C, CK 97-CVR, CK 98 ΜΕ ΕΙΔΙΚΟ ΣΥΝΔΕΣΜΟ ΤΥΠΟΥ BAYONET.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

The e 865 is a fully professional super-cardioid vocal microphone utilising the
very best in condenser microphone technology to achieve new standards of
quality and sound. The microphone capsule insorporates special blast/pop
protiction plate to shield the diaphragm from excessive sound pressure levels. 

Features
Rugged metal body
Extended dynamic response with pronounced presence and vocal 'punch'
Excellent feedback rejection
Very good rejection of handling noise
Very high sound pressure handling capability
Delivery Includes
1 e 865
1 microphone clip
1 pouch

Technical Data
Pick-up pattern  super cardioid 
Sensitivity in free field, no load (1kHz)  3 mV/Pa 
Max. Sound pressure level (aktiv)  150 dB 
Nominal impedance  200 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  d 47 x 193 mm 
Weight w/o cable  311 g 
Frequency response (microphone)  40.....20000 Hz 
Phantom powering  12 - 48 V 

Ζεύγος πυκνωτικών μικρόφωνων τύπου ʽπουράκιʼ ,κατάλληλο για ηχογράφηση ακουστικών οργάνων, χαμηλού θορύβου, με απόκριση συχνότητας 20Hz – 20KHz, ευαισθησία –38 db re 1Mv Pa, δυναμική περιοχή >128 db και max SPL 143 db. Περιλαμβάνει αντιανέμιο WS5, δύο μανταλάκια στήριξης RM5 και πλαστική βαλίτσα μεταφοράς.

• Ακουστική αρχή : Externally polarised single diaphragm
• Τύπος κάψας : Καρδιοειδής
• Απόκριση συχνότητας : 20Hz - 20kHz
• Αντίσταση εξόδου: 100Ω
• Λόγος σήματος προς θόρυβο din iec 651: 78dB
• Σχετικό επίπεδο θορύβου:
• Μέγιστο Επίπεδο Εντασης spl: 143 dB @ 1% THD into 1k_
• Ευαισθησία : -38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL
• Τροφοδοσία : P48 Supply (38V–52V), P24 Supply (20V-26V)
• Κατανάλωση : 4 mA, 2 mA,
• Βάρος : 100g

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.

The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.

• Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
• Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
• Mono compatibility ideal for broadcast applications
• 40 to 20,000 Hz frequency response
• Low noise and distortion
• Wide dynamic range
• Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
• Operates on phantom power or a 6V camera battery
• LED power indicator
• Internal shock mount for reduced stand vibration and handling noise
• Built-in "pop" screen
• Includes windscreen, swivel adapter, and Y-cable