The SX-1800 produces 1800 Watts of power from a class AB amplifier design. Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at a blistering 900-Watts per-side in stereo mode with out breaking a sweat, thanks to the internal amplifier design and variable-speed fan cooling. FEATURES; Professional […]
The SX-1800 produces 1800 Watts of power from a class AB amplifier design.
Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at
a blistering 900-Watts per-side in stereo mode with out breaking a sweat, thanks
to the internal amplifier design and variable-speed fan cooling.
FEATURES;
Professional Class AB Power Amplifier
400 Watts per side @ 8 Ohms
600 Watts per side @ 4 Ohms
900 Watts per side @ 2 Ohms
1800 Watts bridged mono @ 4 Ohms
Dual Variable-speed Fan Cooling System
Signal, Peak, and Protection Circuit Indicators
5-way Binding Post and Speakon Speaker Outputs
XLR and TRS Input connections
Dual Rack Space Design
Βάρος
19.00 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “SAMSON SX1800 Ενισχυτής Ισχύος 2X600W” Ακύρωση απάντησης
The SX-1800 produces 1800 Watts of power from a class AB amplifier design.
Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at
a blistering 900-Watts per-side in stereo mode with out breaking a sweat, thanks
to the internal amplifier design and variable-speed fan cooling.
FEATURES;
Professional Class AB Power Amplifier
400 Watts per side @ 8 Ohms
600 Watts per side @ 4 Ohms
900 Watts per side @ 2 Ohms
1800 Watts bridged mono @ 4 Ohms
Dual Variable-speed Fan Cooling System
Signal, Peak, and Protection Circuit Indicators
5-way Binding Post and Speakon Speaker Outputs
XLR and TRS Input connections
Dual Rack Space Design
Τελικός ενισχυτής 2U ισχύος 2 Χ 750 Watt/4Ω με απόκριση συχνότητας 20Hz - 20KHz. Βάρος 19 Kg. Διαθέτει ρύθμιση ευαισθησίας εισόδου (0,775V/1,0V/1,44V), Limiter και φίλτρα Low pass & High pass για σύνδεση με sub ή δορυφόρο. Διαθέτει εισόδους balanced XLR/JACK και εξόδους ηχείων σε Speakon & Binding post
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
OUTPUT POWER
S-1500
S-2000
S-3000
S-4000
S-6000
S-3004
S-4004
S-4044
S-6004
S-6044
1kHz, 1.0% THD
2 ohms
2x880W
2x1190W
2x1570W
2x1950W
2x2950W
4x700W
4x980W
-
4x1440W
-
4 ohms
2x575W
2x790W
2x1100W
2x1380W
2x2025W
4x500W
4x670W
4x975W
4x1000W
4x1480W
8 ohms
2x325W
2x460W
2x630W
2x810W
2x1250W
4x300W
4x430W
4x690W
4x620W
4x1015W
Bridge @ 4ohms
1760W
2380W
3140W
3900W
5900W
2x1400W
2x1960W
-
2x2880W
-
Bridge @ 8ohms
1150W
1580W
2200W
2760W
4050W
2x1000W
2x1340W
2x1950W
2x2000W
2x2960W
P. N. 12dB C.F.
2 ohms
2x975W
2x1360W
2x2060W
2x2460W
2x4225W
4x890W
4x1170W
-
4x2080W
-
4 ohms
2x610W
2x880W
2x1240W
2x1600W
2x2600W
4x580W
4x820W
4x1230W
4x1280W
4x2110W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs
Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™
Crown XLI 2500
The Crown XLI 2500 is a reasonably priced, but robust and powerful power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 2500 offers a robust an analog circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel).
Crown XLI 2500:
Reasonably priced, robust and powerful power amplifier
Robust and analog circuit
LED display for each channel for signal, clip and error
Stereo, bridge and parallel modes
Conventional power supply
Performance: 2 x 520 Watt an 8 Ohm, 2 x 800 Watt an 4 Ohm
Inputs: Cinch, XLR
Outputs: 2 x speakon, spring clip
Robust 19 inch housing
Height: 2 U
Specifications
XLi800
XLi1500
XLi2500
XLi3500
Channels
2
2
2
2
Sensitivity (full rated power at 8 ohms)
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted)
> 100 dB
> 100 dB
> 100 dB
> 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB)
= /
= /
= /
= /
Frequency Response (at 1W, 20Hz - 20kHz)
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
Crosstalk (below rated power)
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms)
> 200
> 200
> 200
> 200
AC Line Voltage and Frequency Configurations (± 10%)
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
Dimensions (H x W x D)
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 14.4“
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 366mm)
Net Weight
25.1 lb (11.4 kg)
28.0 lb (12.7 kg)
29.7 lb (13.5 kg)
43.0 lb (19.5 kg)
Net Shipping Weight
29.5 lb (13.4 kg)
32.4 lb (14.7 kg)
34.2 lb (15.5 kg)
47.4 lb (21.5 kg)
Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 1800 W, 4 Ω - 1200 W, 8 Ω - 750 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 3400 W, 4 Ω - 1800 W, 8 Ω - 950 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 3600 W, 8 Ω - 2400 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +6.6 dBu (1.66 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class H Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 17.7 kg (39.0 lbs)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.