Content |
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- 2 operating modes can be selected (stereo or bridged)
- 2 level controls
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- The device is cooled by cooling fan
- (19") 48.3 cm rack installation 1 U
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
210 W 1/8 power |
Output power: |
2 x 510 W RMS (4 ohms)
2 x 300 W RMS (8 ohms)
1000 W RMS bridged (8 ohms) |
Power connection: |
Mains input via P-Con (blue), mounting version power supply cord with safety plug (provided) |
Frequency range: |
30 - 20000 Hz |
S/N ratio: |
>100 dB |
THD: |
<0,02 % at 1 kHz |
Cooling: |
Cooling fan |
Impedance: |
Input: 20 kOhm , bal.
Input: 10 kOhm , unbal. |
Gain: |
36 dB |
Circuitry: |
Class D |
Control elements: |
Power switch, level control per channel, mode switch (stereo/bridged), groundlift selector |
Controls: |
Short-circuit; overheat; DC voltage; power on/off transients; softstart; power on/off transient; limiter |
Status LED: |
Power, signal, protect, limit |
Connections: |
Input: line via 2 x 3-pin XLR
Link: line via 2 x 3-pin XLR
Output: speaker via 2 x speaker built-in socket (F) |
Input sensitivity: |
1,25 V |
Housing design: |
(19") 48.3 cm rack installation 1 U |
Dimensions: |
Width: 48,3 cm
Depth: 24 cm
Height: 4,45 cm |
Weight: |
4,03 kg |
|
Τελικός ενισχυτής 2x750W/4Ω-500W/8Ω-1Χ1500W bridge 8Ω. Stereo/Parallel/Bridge mode. 0.775-1.4v ευαισθησία. Είσοδοι XLR/RCA- Έξοδοι Speakon+Binding post. Ρυθμιστικά Level-gain-operation mode. Eνδεικτικά LED. Προστασία για Βραχυκύκλωμα-κενό φορτίο-καθυστέρηση έναρξης-αντιπαρασιτικό RF. 2RU Διαστασεις ΥΠΒ 8.9Χ 48.1 Χ 38.6cm. Bάρος 13.7 κιλά.
Crown XLI 2500
The Crown XLI 2500 is a reasonably priced, but robust and powerful power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 2500 offers a robust an analog circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel).
Crown XLI 2500:
- Reasonably priced, robust and powerful power amplifier
- Robust and analog circuit
- LED display for each channel for signal, clip and error
- Stereo, bridge and parallel modes
- Conventional power supply
- Performance: 2 x 520 Watt an 8 Ohm, 2 x 800 Watt an 4 Ohm
- Inputs: Cinch, XLR
- Outputs: 2 x speakon, spring clip
- Robust 19 inch housing
- Height: 2 U
Specifications
| XLi800 | XLi1500 | XLi2500 | XLi3500 | Channels | 2 | 2 | 2 | 2 | Sensitivity (full rated power at 8 ohms) | 0.775V or 1.4V | 0.775V or 1.4V | 0.775V or 1.4V | 0.775V or 1.4V | Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted) | > 100 dB | > 100 dB | > 100 dB | > 100 dB | Total Harmonic Distortion (THD) (20Hz - 20kHz) | | | | | Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB) | = / | = / | = / | = / | Frequency Response (at 1W, 20Hz - 20kHz) | 0 dB, -1 dB | 0 dB, -1 dB | 0 dB, -1 dB | 0 dB, -1 dB | Crosstalk (below rated power) | at 1kHz: -75 dB | at 1kHz: -75 dB | at 1kHz: -75 dB | at 1kHz: -75 dB | at 20kHz: - 59 dB | at 20kHz: - 59 dB | at 20kHz: - 59 dB | at 20kHz: - 59 dB | Damping Factor (from 10Hz to 400Hz, 8 ohms) | > 200 | > 200 | > 200 | > 200 | AC Line Voltage and Frequency Configurations (± 10%) | 120VAC 60Hz | 120VAC 60Hz | 120VAC 60Hz | 120VAC 60Hz | 220VAC 50/60Hz | 220VAC 50/60Hz | 220VAC 50/60Hz | 220VAC 50/60Hz | 230-240VAC 50/60Hz | 230-240VAC 50/60Hz | 230-240VAC 50/60Hz | 230-240VAC 50/60Hz | | | | | | Dimensions (H x W x D) | 3.5" x 19" x 12.4“ | 3.5" x 19" x 12.4“ | 3.5" x 19" x 12.4“ | 3.5" x 19" x 14.4“ | (89 x 482 x 315mm) | (89 x 482 x 315mm) | (89 x 482 x 315mm) | (89 x 482 x 366mm) | Net Weight | 25.1 lb (11.4 kg) | 28.0 lb (12.7 kg) | 29.7 lb (13.5 kg) | 43.0 lb (19.5 kg) | Net Shipping Weight | 29.5 lb (13.4 kg) | 32.4 lb (14.7 kg) | 34.2 lb (15.5 kg) | 47.4 lb (21.5 kg) |
|
Επαγγελματικός τελικός ενισχυτής ήχου 2x590W RMS/ 4Ω, 2x700W RMS/ 8Ω. Διαθέτει εισόδους XLR, jack (6.3mm) και εξοδους speakon, jack (6.3mm). Με crossever για απευθείας σύνδεση με subwoofer/ δορυφόρους και soft-start limiter. Μπορεί να οδηγήσει μέχρι 2 ηχεία 8 Ohm ανα κανάλι (με παράλληλη σύνδεση). Προστασίες υπερθέρμανσης, υπερφόρτωσης και βραχυκυκλώματος.
- Soft-start limiter
- 3 λειτουργίες: stereo, parallel, mono-bridged
- Μεγάλα πτερύγια ψύξης
- Υψηλής απόδοσης ανεμιστήρες ψύξης με μεταβλητή ταχύτητα
- Προστασία υπερφόρτωσης και βραχυκυκλώματος
- Σύστημα θερμικής προστασίας
- Ξεχωριστά κυκλώματα για τα κανάλια A και B
- Έξοδοι: PA pro speaker cable, 6.3 mm Jacks
- Είσοδοι: XLR, 6.3 mm Jacks
Τεχνικά χαρακτηριστικά:
- Ισχύς εξόδου:
2 x 700 w, 8 ohm
2 x 950 W, 4 Ohm
1 x 1900 W, 8 Ohm mono bridged - Εύρος συχνοτήτων: 20 Hz - 20 kHz
- Διαστάσεις: 483 x 88 x 490 mm
- Βάρος: 13.0 kg
|
Tελικός ενισχυτής 2x800w/4Ω-2x1000w/2Ω/1x2000w/4Ω bridge. Νέα βελτιωμένη μονάδα DSP και οθόνη LCD. Η νέα σειρά XTI2 διαθέτει: Peak Plus Limiters-με ρύθμιση threshold/attack/release-Enchaced SubHarmonic Syntesizer. Ρύθμιση λειτουργίας FAN για πλήρη έλεγχο της ψύξης, νέος έλεγχος και monitoring μέσω software της τάσης λειτουργίας και της θερμοκρασίας του τροφοδοτικού. Χειρολαβές ενισχυμένου αλουμινίου, δυνατότητα κλειδώματος της παροχής τροφοδοσίας, βελτιωμένο software ελέγχου System Archtect και ΗιQnet Band Manager και 30 θέσεις μνήμης. Το DSP του ενισχυτή διαθέτει: Ιnput EQ 6 band parametric+Hi και Low passFilters-Crossover Highpass and Lowpass φίλτρα για κάθε κανάλι. Butterworth 6/12/18/24dB per octave. Linkwitz-Riley 24/48dB ανά Octave με ρύθμιση ±15dB bandpass gain και ρύθμιση φάσης. Output EQ 8 x παραμετρικά φίλτρα ανά κανάλι με ρύθμιση Q, ±15dB boost/cut. Delay μέχρι 50ms, ευαισθησία εισόδου 1.4v/ Bύσματα εισόδου XLR με Loop Thru. Speakon βύσματα, Θύρα USB. Διαστάσεις: βάθος 31εκ., ύψος 2U. Bάρος 8,4 kg. |
PC-4801N Νέας γενιάς τελικός επαγγελματικός ενισχυτής υψηλών απαιτήσεων. Παρέχει μεγάλη ισχύ εξόδου και υψηλή ποιότητα ήχου. Χρησιμοποιώντας την επόμενης γενιάς τεχνολογία EEEngine, ο ενισχυτής έχει έως 40% μεγαλύτερη απόδοση και χαμηλότερη εκπομπή θερμότητας από συμβατικές τεχνολογίες ενισχυτών. Έχει διπλούς ανεμιστήρες ψύξης με αυτόματα ρυθμιζόμενη ταχύτητα για απόλυτη ψύξη. Διαθέτει θήρα για σύνδεση σε ψηφιακό δίκτυο CobraNet και θύρα για σύνδεση και έλεγχο λειτουργίας με surveillance system. Απόκριση συχνότητας 10 Hz – 40 KHz. Ισχύς 2 x 500 Watt / 8Ω RMS, 2 x 800 Watt / 4Ω RMS, 1600 Watt / 8Ω bridge RMS. Βάρος 12,5 κιλά. |
Minimum Guaranteed Power per channel, both channels driven | | XLS 1000 | XLS 1500 | XLS 2000 | XLS 2500 | Stereo, 2 ohms (per ch.) | 550W | 775W | 1050W | 1200W | Stereo, 4 ohms (per ch.) | 350W | 525W | 650W | 775W | Stereo, 8 ohms (per ch.) | 215W | 300W | 375W | 440W | Bridge-Mono, 8 ohms | 700W | 1050W | 1300W | 1550W | Bridge-Mono, 4 ohms | 1100W | 1550W | 2100W | 2400W | Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today. XLS - XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
- Integrated PureBand™ Crossover System for better performance and control
- Peakx™ Limiters provide maximum output while protecting your speakers
- XLR, 1/4“, RCA inputs provide outstanding flexibility
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
XLS Series with Integrated DriveCore™ Technology The XLS Series of power amplifiers from Crown define the standard for live sound systems with unmatched performance, technology, and affordability. This high-performance line consists of four models each providing enormous power and flexibility thanks to the integrated DriveCore™ Technology, PureBand™ Crossover System and Peakx™ limiters. And weighing in at only 10 lbs or less, they provide the ultimate in lightweight portability. Generating chest-thumping lows and crystal clear highs, the four models in the series – the XLS1000, XLS1500, XLS2000, and XLS2500 – are engineered to meet any demanding audio requirements – reliably and within budget. Every XLS Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the Crown XLS Series. They are a powerful argument for performance, flexibility, and value! Integrated DriveCore™ Technology Class D amplifiers are notable for extraordinarily high efficiency and being well suited for driving difficult reactive loads such as subwoofers. However, their performance can suffer impaired performance on marginal and unstable AC line supplies. To overcome this obstacle, Crown engineers developed DriveCore™ Technology – a proprietary hybrid analog-digital integrated circuit (IC) developed with Texas Instruments that drives the "front end" of the Class D output stage. Over 60 years of Crown's design knowledge and experience went into the development of this technology resulting in truly remarkable benefits. DriveCore™ Technology provides an extremely wide-tolerance with regards to sagging or "dirty" AC line conditions providing consistent performance without affecting audio quality. This means that your performance will not be compromised by fluctuating generator power or overloading by lighting rigs, backline gear, etc. In addition, DriveCore™ Technology's patented feedback and PWM modulation circuits enable fast recovery on peak transients, accurate reproduction of low-level detail, and precise tracking of low-frequencies at high power levels for maximum subwoofer output. Advanced Switched-Mode Power Supply This advanced power supply is highly efficient and optimized for maximum power transfer from the AC line through the Class D output stage to the loudspeakers. A benefit to this is substantial weight reduction when compared to older 60Hz transformer-based power supplies. All four models in the line weigh 10 pounds or less with no compromise in performance. This makes the XLS Series the benchmark for high performance lightweight portability. PureBand™ Crossover System The PureBand™ Crossover System in the XLS Series adds an enormous amount of flexibility and performance to any system. With this system, the crossover frequency is completely variable allowing the choice of any crossover point between 50Hz and 3kHz on 1/12 octave centers. The use of 4th order Linkwitz-Riley filters provides steep slopes for a seamless transition between high and low drivers. And with four crossover modes to choose from providing the ultimate in flexibility, all of your system needs are covered: - Crossover Mode (CH1=LPF, CH2=HPF) – When chosen, this mode enables a LowPass Filter on Channel 1 and a HighPass Filter on Channel 2 at the frequency chosen.
- LowPass Mode (CH1=LPF, CH2=LPF) – When chosen, this mode enables a LowPass Filter on both Channel 1 and Channel 1 at the frequency chosen.
- HighPass Mode (CH1=HPF, CH2=HPF) – When chosen, this mode enables a HighPass Filter on both Channel 1 and Channel 2 at the frequency chosen.
- Bridge Mode (LPF or HPF) – When the amplifier is put into Bridge-Mono, you are still able to use the crossover system and employ either a LowPass Filter or HighPass Filter at the frequency chosen.
All of the PureBand™ Crossover System settings can be fully configured quickly and easily from the front panel using the intuitive LCD interface. Peakx™ limiters Peakx™ limiters provide the ultimate in performance and protection for your entire system. This advanced algorithm was specifically developed and tuned to work with this amplifier and power-supply to achieve higher SPL will less audible artifacts. This means less distortion, less shutdowns, and maximum safe power delivered to your speakers. The Peakx™ limiters can be easily turned on or off by channel right from the front panel eliminating the need to be digging around in the back of the dark rack. Sensitivity (for full rated power at 4 ohms) | 1.4 Vrms | Frequency Response (at 1 watt, 20 Hz - 20 kHz) | +0 dB, –1 dB | Signal-to-Noise Ratio | Rated as dBr to full rated 8Ω power output (A-Weighted): XLS1000 > 97 dB XLS1500, XLS2000, XLS2500 > 103 dB | Damping Factor (8 ohm): 10 Hz to 400 Hz | > 200 | Crosstalk (below rated 8Ω power) | At 1kHz: > 85dB At 20kHz: >55dB | Input Impedance (nominal) | 20 kΩ balanced, 10 kΩ unbalanced | Load Impedance | 2 to 8 Ω per channel in Stereo 4 to 8 Ω in Bridge Mono | AC Line Voltage and Frequency Configurations Available (± 10%) | 120 VAC 60 Hz 100 VAC 50/60 Hz 220 and 240 VAC 50 Hz | Ventilation | Flow-through ventilation from front to back | Cooling | Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation | Air Volume Requirements (per minute per unit) | 80.15 ft³ (2.27 m³) | Integrated Processing | PureBand™ Crossover System Crossover Filter: Linkwitz-Riley 24dB per Octave Crossover Frequency Range: 50 HZ - 3 kHz Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF). Peakx™ limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers | Input/Output | Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers. Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector. One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.) | Construction | XLS1000/XLS1500: 8.12-Inch (20.62cm) depth XLS2000/XLS2500: 10.35-Inch (26.29cm) depth | Dimensions | EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-inch (8.9-cm) height. XLS 1000/1500: 7.7-inch (19.6-cm) depth. XLS 2000/2500: 10.7-inch (27.2-cm) depth. | Net Weight , Shipping Weight | XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg) XLS1500: 8.6 lb (3.9kg), 13.6 lb (6.2 kg) XLS2000: 10.75 lb (4.9kg), 15.8 lb (7.1 kg) XLS2500: 10.75 lb (4.9kg), 15.8 lb (7.1 kg) | |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.