| Stock | Διαθέσιμο κατόπιν παραγγελίας
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Μόνο 4 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Διαθέσιμο κατόπιν παραγγελίας
| Μόνο 2 απομένουν σε απόθεμα
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
|
| Content |
| Maximum carrying capacity: |
30 kg |
| Height: |
Maximum: 111 cm
Minimum: 73 cm |
| Type (general stands): |
Speaker stand/manual |
| Material: |
Steel |
| Color: |
Black, matte, painted |
| Storage area: |
23 cm x 23 cm |
| Weight: |
4,16 kg |
Adjustable stand 73-111 cm, max. load 30 kg
- Particularly suited for near-field monitors
- Auto-lock pin
- The article is delivered dismantled
- Adjustable height
- Made in Europe
Package contents
- 1 x stand, 6 x screw, 3 x washer, 2 x hex key, 4 x foam padding, 1 x user manual
|
Description
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder-coated
Min height
250 mm
Max height
350 mm
Tilt angle
+/- 15 °
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base material
Steel
Base edge length
250 mm
Max. load
25 kg
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
Weight
4 kg | Isolation Pad for Studio Monitors 265 x 330 mm
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
265 mm
Height
40 mm
Depth
330 mm
Weight
0,22 kg | The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
900 mm
Max height
1500 mm
Height adjustment
Clamp with safety pin
Base type
3-point
Base material
Cast iron
Base edge length
292.5 mm
Lower connector
M20
Tubing diameter
42 mm / 35 mm
Max. load
50 kg
Interchangeable rings
1 x 25 mm , 1 x 30 mm
Weight
6,5 kg
Additional information
Including acoustic isolation spikes | Features
- Sturdy construction for use with extremely heavy studio monitors
- Adjustable spikes to compensate for uneven floors
Specifications
- Material: steel
- Color: black
- Height: 90 cm
- Maximum load capacity: 60 kg
- Pole diameter: 100 mm * (2.0 mm material thickness)
- Support plate: 500 x 350 mm (6.0 mm material thickness)
- Base plate: 600 x 450 mm (6.0 mm material thickness)
- Weight: 27 kg?
Scope of delivery
Applications
- Speaker stand in recording or project studio
- Speaker stand in band rehearsal room
- Speaker stand for installation and in conference rooms
|
| Τύπος προϊόντος |
Βάσεις και τρίποδα |
| Τύπος |
Βάσεις ηχείων |
| Υλικό |
Ατσάλι |
| Χρώμα |
Μαύρο |
| Ελάχιστο ύψος |
150 mm |
| Μέγιστο ύψος |
250 mm |
| Επιφάνεια |
160 x 180 mm, Με επένδυση EVA |
| Ρύθμιση ύψους |
Βίδα ρύθμισης |
| Υλικό βάσης |
Ατσάλι |
| Μήκος άκρου βάσης |
220 x 205 mm |
| Μέγιστο φορτίο |
15 kg |
| Εναλλάξιμοι δακτύλιοι |
1 x 30 mm |
| Μαύρο πακέτο δακτυλίων περιλαμβάνεται |
Ναι |
| Βάρος |
4,4 kg |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.