Content | The ultra compact MAUI 5 weighs in at less than 11 kg while delivering 800 watts of peak power and a maximum SPL of 120 dB. Providing both sound reinforcement with extended coverage and feedback resistant monitoring the subwoofer base and 3-piece column system assembles in seconds with custom multipin connectors. The junior member of the MAUI family is most easily portable and fits onto any car seat.
The vented 8" subwoofer also houses the system's Class D amplification with overcurrent, short circuit and thermal protection, LD Systems' proprietary LECC digital processing and a 4-channel mixer. Featuring Bluetooth© technology for wireless streaming and microphone, line level and hi-Z inputs which can be used simultaneously the MAUI 5 lets you connect a wide variety of sources including music players and instruments such as keyboards or guitars. Individual level controls, subwoofer and master volumes plus high shelf filtering for room correction enable a perfectly balanced performance.
- Item Number: LDMAUI5
- Product Type: complete PA system
- Type: active
- Colour: White
- Max. SPL (continuous): 114 dB
- Max. SPL (peak): 120 dB
- Frequency Response: 50 - 20,000 Hz
- Dispersion Angle (H x V): 120° x 20°
- Total Height: 1985 mm
- Weight: 10.9 kg
- Other Features: DSP-based signal processing
- Woofer characteristics
- Woofer Size: 1 x 8“
- Woofer Size: 1 x 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- Woofer Voice Coil: 2“
- Woofer Voice Coil: 50.8 mm
- Cabinet Type: bass reflex
- Cabinet Material: ABS
- Subwoofer Width: 305 mm
- Subwoofer Height: 405 mm
- Subwoofer Depth: 395 mm
- Mid/Hi System
- Midrange Size: 4 x 3“
- Midrange Size: 4 x 76.2 mm
- Midrange Magnet: neodymium
- Midrange Brand: custom-made
- Midrange Voice Coil: 1“
- Midrange Voice Coil: 25.4 mm
- Mid/Hi System Impedance: 4 ohm
- Speaker Inputs: 1
- Speaker Input Connections: custom-made multi-pin
- Mid/Hi System Cabinet Type: closed
- Mid/Hi System Cabinet Material: ABS
- Mid/Hi System Cabinet Surface:
- Mid/Hi System Width: 82 mm
- Mid/Hi System Height: 535 mm
- Mid/Hi System Depth: 105 mm
- Amplifier Module (integrated in subwoofer)
- Amplifier: class D
- Amplifier Power System (RMS) 200 W
- Amplifier Power System (peak): 800 W
- Protection Circuits: DSP-based multiband limiter, overvoltage, short circuit, overcurrent
- Cooling System: convection
- Controls: Sub Level, MP3/Hi-Z Level, Main Level, Line Level, Mic Level, BT Level, BT Pairing Button
- Display Elements: Signal, On, Limit, Protect
- Power Supply: switching power supply
- Operating Voltage: 100 V AC - 120 V AC / 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz (automatic adjustment)
- Line Inputs: 2 x stereo
- Line Input Connectors: XLR, 6.3 mm jack
- Mic Inputs: 1
- Mic Input Connectors: XLR, 6.3 mm jack
- MP3 Inputs: 1
- MP3 Input Connectors: 3.5 mm jack
- Hi-Z Inputs: 1
- Hi-Z Input Connectors: 6.3 mm jack
- Speaker Outputs: 1
- Speaker Output Connections: custom-made multi-pin
- DSP Features
- Word Length AD / DA Converter: 24 / 24 Bit
- Internal Sampling Frequency: 48 kHz
|
Reloop's Active PA Set stands for mobile sound quality. The heart of the entire independent PA system is the massive 600 watt subwoofer module which in addition to a 38 cm speaker also accommodates a perfectly modulated final amplifier including limiter and diplexer. The 'highlights' of the Reloop Active PA system are the two 150 watt satellites.
features:
- 600 watt RMS high-end active subwoofer satellite combination
- Set consists of:
1 x 300 watt RMS high-end active subwoofer
2 x 150 watt RMS high-end active satellites
2 x Aluminium loudspeaker stands
2 x PA professional speaker cables
1 x line cord
technical data:
Subwoofer:
- Type: active bandpass subwoofer
- Frequency range: 35 Hz - 250 Hz
- Acoustic pressure: 129 dB
- Speaker: 38 cm (15“) "Long-Throw" woofer
- Active electronic filter
- Integrated diplexer
- Opto limiter
- Dynaclip protective system
- Transportation wheels
- Carrying handles
- Inputs: 6.3 mm jack, XLR
- Outputs: PA professional speaker cables
- Dimensions: 447 x 542 x 640 mm
- Weight: 48.5 kg
Satellites:
- Type: active 2-way system
- Frequency range: 100 Hz - 18 kHz
- Impedance: 4 ohm
- Acoustic pressure: 119 dB
- Speaker: 20.3 cm (8“) mid/low-frequency speaker, 2.54 cm (1“) tweeter
- Connections: PA professional speaker cable
- Dynamic protective system
- Dimensions: 272.5 x 420 x 250 mm
- Weight: 10 kg |
Φορητό σύστημα PA 400W Dynamic Power με αυτοενισχυόμενη κονσόλα 8 καναλιών, 2 ηχεία 8“, είσοδο Bluetooth, SPX digital reverb, ενσωματωμένο feedback suppressor και equalizer
Χαρακτηριστικά :
- Ισχύς: 400W (200W+200W Dynamic), 360W (180W+180W Continuous)
- Maximum SPL (1m on axis): 125dB SPL / ηχείο
- Ηχεία: LF 8" woofer + HF 1" voice coil compression driver
- Αποσπώμενη 8-κάναλη κονσόλα (4 mono/line + 4 mono/2 stereo line)
- Bluetooth audio streaming
- Bluetooth Ver.4.1, A2DP v1.2, Εμβέλεια: περίπου 10 m
- Master EQ ενός κουμπιού με virtual bass boost
- SPX digital reverb (4 τύποι)
- Ενσωματωμένο feedback suppressor
- 2-band EQ σε κάθε κανάλι
- Δυνατότητα επιλογής ανάμεσα σε stereo/ mono εισόδους
- Είσοδοι Hi-Z για σύνδεση ηλεκτρικών οργάνων χωρίς τη χρήση DI box
- Phantom power
- Έξοδοι monitor και subwoofer
- Eίσοδος για τη σύνδεση του ποδοδιακόπτη YAMAHA FC-5 για την ενεργοποίηση του reverb (διατίθεται ξεχωριστά σαν προαιρετικός εξοπλισμός)
- Υποδοχή στο κάτω μέρος της κονσόλας για να μπορέσει να τοποθετηθεί πάνω σε βάση μικροφώνου με τη χρήση του YAMAHA BMS-10A (διατίθεται ξεχωριστά σαν προαιρετικός εξοπλισμός)
- Καμπίνα ηχείου με δυνατότητα τοποθέτησης στο δάπεδο υπο γωνία 50 μοιρών για χρήση floor monitor
- Συνολικό βάρος συστήματος: 18.3 kg
- Διαστάσεις : ηχείο 28,9x47,2x27,5 εκ, κονσόλα 30,8x18,0x11,6 εκ.
Το σύστημα μπορεί να αποθηκευτεί στην ειδική θήκη μεταφοράς SC-Stagepas-400 (διατίθεται ξεχωριστά σαν προαιρετικός εξοπλισμός)
(Ηχεία): |
x 2 |
Tύπος: |
2 passive speakers |
Woofer: |
8" (20 cm) cone |
Cone: |
1" (2.54 cm) voice coil compression driver |
Τύπος Κατασκευής: |
Two-way bass-relfex speakers |
Φάσμα Συχνοτήτων: |
55 Hz - 20 kHz |
Διαστάσεις: |
Ηχείο 28.9 x 47.2 x 27.5 εκ. |
Βάρος: |
2 x Ηχεία 7.7kg |
Τύπος: |
Αυτοενισχυόμενη κονσόλα |
Ισχύς: |
400W (200 W + 200 W) (Dynamic), 360W (180W + 180W) (Continuous) |
Eισόδoι/Έξοδοι: |
4 mono mic / line + 4 mono / 2 stereo line - Speakers Out(L, R), Monitor Out(L/MONO, R), Subwoofer Out (MONO) with auto HPF |
Κανάλια: |
Mixing channels 8 |
Equalizer: |
High Shelving: 8 kHz / Low Shelving: 100 Hz |
Eφφέ: |
SPX digital reverb (4 program, parameter control) |
Phantom Power: |
+30V (CH1, 2) |
Διαστάσεις: |
30.8 x 18.0 x 11.6 εκ. |
Βάρος: |
2.9kg |
|
LD Systems DAVE 10 G3 - Active PA-System with DSP
The LD Systems DAVE 10 G3 is the latest generation of an extremely compact active PA system. The bass reflex subwoofer provides a solid bass foundation; the satellites ensure clearly defined mids and clear treble. The 2.1 power amp module built into the subwoofer delivers 1400W Peak power, and the intelligent LD LECC DSP guarantees perfect interaction and controlled functioning. The digital signal processor includes specially optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The DAVE 10 G3 system's professional features include sturdy MDF cabinets, the necessary protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomic handles. The LD "Evolutive" handles of the subwoofer are a genuine innovation - they permit a trouble-free, secure grip from all sides! The stand support of the satellites is tilted by five degrees for perfect orientation of the speaker cabinet.
Protection covers for the system components and a castor board with a lashing strap for convenient transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
The DAVE 10 G3 is especially suitable for portable use and are very convenient to transport, making it just right for solo entertainers and duos. However, it also cuts a good figure in small permanent installations, e.g., in bars and restaurants.
- Type: active
- Max. SPL Continuous: 115 dB
- Max. SPL Peak: 126 dB
- Frequency range: 45 - 19,000 Hz
- Dispersion angle (H x V): 70 x 70°
Subwoofers
- Woofer size: 10“
- Woofer size: 254 mm
- Woofer magnet: ferrite
- Woofer brand: custom made
- Woofer voice coil: 2“
- Woofer voice coil: 50.8 mm
- Cabinet type: bass reflex
- Cabinet material: 15 mm MDF
- Cabinet surface: textured coating
- Subwoofer width: 345 mm
- Subwoofer height: 430 mm
- Subwoofer depth: 460 mm
- Subwoofer features: Threaded flange (M20), LD Systems Evolutive handles
Mid/Hi System
- Midrange size: 5,25“
- Midrange size: 133.4 mm
- Midrange magnet: ferrite
- Midrange brand: custom made
- Midrange voice coil: 1“
- Midrange voice coil: 25.4 mm
- Horn: radial
- Tweeter size: 1“
- Tweeter size: 25.4 mm
- Tweeter magnet: neodymium
- Tweeter brand: custom made
- Tweeter voice coil: 1“
- Tweeter voice coil: 25.4 mm
- Mid/Hi system impedance: 4 ohms
- Speaker inputs: 1
- Speaker input connections: Speakon compatible
- Mid/Hi system cabinet type: closed
- Mid/Hi system cabinet material: 12 mm MDF
- Mid/Hi system cabinet surface:: textured coating
- Mid/Hi system width: 200 mm
- Mid/Hi system height: 300 mm
- Mid/Hi system depth: 230 mm
- Mid/Hi system features: Ergonomic recessed handles, speaker stand support with 5° tilt
Amplifier module (integrated in subwoofer)
- Amplifier: Class A/B
- Amplifier power system (RMS) 350 W
- Amplifier power system (peak): 1400 W
- Protection: Short circuit, limiter, overload
- Cooling System: aluminium heat sink
- Controls: Power, Sub Level, Subwoofer Phase Reverse, Volume
- Indicators: On/Off, Limit, Signal
- Power supply: transformer
- Power consumption: 600 VA
- Line inputs: 2
- Line input connectors: RCA, XLR/ 6.3 mm jack (combo)
- Speaker outputs: 2
- Speaker output connections: Speakon compatible
| LD Systems STINGER G3 GALA SET A 2 x double 8" powered PA Speaker + 2 x 18" powered Subwoofer
Including a pair of slim, low-profile satellites and two subwoofers, this set is a great option for events that require excellent speech intelligibility and extended coverage. We recommend this set for the following type of application: gala events, corporate conferences. The STINGER G3 GALA SET A is suitable for audiences of up to 350* pax. For optional stands and cables check out the "related products" section. 18''
2 x STINGER 28 A G3 – 28” Powered loudspeaker
2 x STINGER SUB 18 A G3 – 18” Powered subwoofer
2 x STINGER 28 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
General
Product type |
PA system |
Type |
Powered |
System output (RMS): |
2.600 W |
Frequency response |
35 - 20,000 Hz |
Dispersion (H x V) |
90 x 50° |
Weight |
144,1 kg |
LDESUB18G3CB - LD Systems STINGER G3 GALA SET A Dolly Board for Stinger G3 Subwoofer 18" Models
Product type |
PA Complete Systems Accessories |
Material |
birch multiplex |
Type |
castor boards |
Material thickness |
15 mm |
Surface |
Polyurea |
Color |
Black |
Number of casters |
4 |
Wheel diameter |
100 mm |
Manufacturer of castors |
Adam Hall |
number of drag castors |
2 |
Length |
650 mm |
Width |
540 mm |
Weight |
7 kg |
LDEB282AG3 - LD Systems STINGER G3 GALA SET A Active 2 x 8" 2-way bass-reflex PA Loudspeaker
Product type |
PA loudspeaker |
Type |
Powered |
Low/mid driver dimensions |
2 x 8 " |
Woofer size |
2 x 203.2 mm |
Woofer magnet |
Ferrite |
Woofer brand |
Custom-made |
Woofer voice coil |
2 " |
Woofer voice coil (mm) |
50.8 mm |
Horn |
BEM optimized CD Horn |
HF driver dimensions |
1 " |
HF driver size |
25.4 mm |
HF driver magnet |
Ferrite |
HF driver brand |
BMS |
HF driver voice coil |
1 " |
HF driver voice coil |
25.4 mm |
Dispersion (H x V) |
90 x 50 ° |
RMS |
500 W |
Peak power |
1000 W |
Frequency response |
58 - 20000 Hz |
Max. SPL (peak) |
131 dB |
Protection circuits |
thermal overload |
Input sensitivity |
-5 dBu |
Controls |
2 x Mic/Line |
Line input connectors |
XLR |
Line outputs |
1 |
Cabinet material |
12 mm Plywood |
Width |
270 mm |
Height |
756 mm |
Depth |
290 mm |
Weight |
20,5 kg |
LDESUB18AG3 - LD Systems STINGER G3 GALA SET A Active 18" bass-reflex PA subwoofer
Product type |
PA subwoofer |
Type |
active |
Low/mid driver dimensions |
18 " |
Woofer size |
457.2 mm |
Woofer magnet |
Ferrite |
Woofer voice coil |
4 " |
Woofer voice coil (mm) |
101.6 mm |
Amplifier |
Class D |
Input impedance |
30000 Ohm(s) |
Input sensitivity |
0.3 V |
RMS |
800 W |
Peak power |
1600 W |
Indicators |
Signal |
Frequency response |
35 - Low-Pass Hz |
Line inputs |
2 |
Line input connectors |
XLR |
Line output connectors |
XLR |
Max. SPL (peak) |
135 dB |
Operating voltage |
SMPS |
Protection circuits |
short circuit |
Power consumption (max.) |
600 W |
Operating Temperature |
0 - 40 °C |
Relative Humidity |
< 80% (non-condensing) |
Cabinet surface |
Polyurea |
Cabinet construction |
Bass Reflex |
Controls |
Mode |
Depth |
740 mm |
Line outputs |
2 |
Cabinet material |
18 mm Plywood |
Width |
677 mm |
Height |
547 mm |
Weight |
42,6 kg |
LDESUB18G3PC - LD Systems STINGER G3 GALA SET A Padded protective Cover for Stinger® G3 Subwoofer 18"
Product type |
PA Subwoofer Accessories |
Color |
Black |
Material |
Nylon 1680D |
Type |
Covers |
Thickness of the padding |
8 mm |
Depth |
625 mm |
Width |
567 mm |
Height |
470 mm |
Weight |
1,5 kg |
LDEB282G3PC - LD Systems STINGER G3 GALA SET A Padded protective Cover for Stinger® G3 PA Loudspeaker 2 x 8"
Product type |
Protective cover |
Material |
Nylon 1680D |
Height |
750 mm |
Width |
290 mm |
Depth |
310 mm |
Weight |
0,65 kg |
| LD Systems STINGER G3 EVENT SET A 2 x 10" powered PA Speaker + 2 x 15" powered Subwoofer
This set is the perfect all-round package for small to medium-sized gigs and functions providing a tight and punchy low end from the two subwoofers. We recommend this set for the following type of application: DJ, small bands and more. The STINGER G3 EVENT SET A is suitable for audiences of up to 300* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 10 A G3 – 10” Powered loudspeaker
2 x STINGER SUB 15 A G3 – 15” Powered subwoofer
2 x STINGER 10 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 15 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 15 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment
General
Product type |
PA system |
Type |
Powered |
System output (RMS): |
1.500 W |
Frequency response |
40 - 20,000 Hz |
Dispersion (H x V) |
90 x 50° |
Weight |
91,782 kg |
LD Systems STINGER SUB 15 G3 PC Padded protective Cover for STINGER® G3 Subwoofer 15"
Product type |
PA Complete Systems Accessories |
Material |
birch multiplex |
Type |
castor boards |
Material thickness |
15 mm |
Surface |
Polyurea |
Color |
Black |
Number of casters |
4 |
Wheel diameter |
100 mm |
Manufacturer of castors |
Adam Hall |
number of drag castors |
2 |
Length |
624 mm |
Weight |
6 kg |
LD Systems STINGER SUB 15 G3 CB Dolly Board for Stinger G3 Subwoofer 15" Models
Product type |
PA loudspeaker |
Type |
active |
Low/mid driver dimensions |
10 " |
Woofer size |
254 mm |
Woofer magnet |
Ferrite |
Woofer brand |
Custom-made |
Woofer voice coil |
2 " |
Woofer voice coil (mm) |
50.8 mm |
Horn |
BEM optimized CD Horn |
HF driver dimensions |
1 " |
HF driver size |
25.4 mm |
HF driver magnet |
Ferrite |
HF driver brand |
BMS |
HF driver voice coil |
1 " |
HF driver voice coil |
25.4 mm |
Dispersion (H x V) |
90 x 50 ° |
RMS |
300 W |
Peak power |
600 W |
Frequency response |
65 - 20000 Hz |
Max. SPL (peak) |
127 dB |
Protection circuits |
thermal overload |
Input sensitivity |
-9 dBu |
Controls |
2 x Mic/Line |
Indicators |
Mic |
Line input connectors |
XLR |
Line outputs |
1 |
Operating voltage |
Switching power supply |
Cabinet material |
12 mm Plywood |
Monitor angle |
54 ° |
Width |
325 mm |
Height |
527 mm |
Depth |
318 mm |
Weight |
12,7 kg |
LD Systems STINGER 10 A G3 Active 10" 2-way bass-reflex PA Loudspeaker
Product type |
PA Loudspeakers Accessories |
Material |
Nylon 1680D |
Height |
530 mm |
Width |
350 mm |
Depth |
320 mm |
Weight |
0,5 kg |
LD Systems STINGER 10 G3 PC Padded protective cover for Stinger® G3 PA Loudspeaker 10"
Product type |
PA subwoofer |
Type |
Powered |
Low/mid driver dimensions |
15 " |
Woofer size |
381 mm |
Woofer magnet |
Ferrite |
Woofer voice coil |
3 " |
Woofer voice coil (mm) |
76.5 mm |
Amplifier |
Class D |
Input impedance |
30000 Ohm(s) |
Input sensitivity |
0.3 V |
RMS |
450 W |
Peak power |
900 W |
Frequency response |
40 - Low-Pass Hz |
Line inputs |
2 |
Line input connectors |
XLR |
Line output connectors |
XLR |
Max. SPL (peak) |
133 dB |
Protection circuits |
short circuit |
Power consumption (max.) |
600 W |
Operating Temperature |
0 - 40 °C |
Relative Humidity |
< 80% (non-condensing) |
Cabinet surface |
Polyurea |
Cabinet construction |
Bass Reflex |
Controls |
Mode |
Depth |
624 mm |
Indicators |
Signal |
Line outputs |
2 |
Operating voltage |
SMPS |
Cabinet material |
18 mm Plywood |
Height |
477 mm |
Weight |
31,9 kg |
LD Systems STINGER SUB 15 A G3 Active 15" bass-reflex PA subwoofer
Product type |
PA Subwoofer Accessories |
Color |
Black |
Material |
Nylon 1680D |
Type |
Covers |
Thickness of the padding |
8 mm |
Depth |
625 mm |
Width |
567 mm |
Height |
470 mm |
Weight |
1,191 kg |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.