Eminence KL 3010 CXA 10″ Μεγάφωνο 400 W 8 Ohm

Χαρακτηριστικά

400 W continuous program power capacity
64 mm (2.5 in) aluminium voice coil
60 - 4000 Hz response
98.5 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly

• Category of diameter 10 inch / 25 cm
• Magnet type Neodymium
• Shape Cylindrical
• External diametre 261 mm
• Mounting diametre 230 mm
• Basket front tickness 12.5 mm
• Depth 109.5 mm
• Znom 8 ohm
• Brand B&C Speakers
• Type Cone driver
• Impedance 8 ohm
• Voice coil diameter 2.5“
• Sensitivity 98.5dB
• Nominal power handling 200W
• Max power handling 400W
• Fs 61Hz
• Re 5.4ohm
• Zmin 6.2ohm
• Qts 0.31
• Qms 5
• Qes 0.33
• Vas 32L
• Sd 320cm²
• Xmax 4mm
• Mms 29gr
• Le 0.5mH
• Efficiency 3%
• EBP 185
• Frequency range 60-4000 Hz
• Forme suspension Double roll
• Forme membrane Exponential
• Spider Single
• Fil bobine Aluminium
• Voice coil former Glass fiber
• Winding depth 12 mm
• Magnetic gap depth 8 mm
• Recommended load 26 L (tuned ar 67 Hz)
• Shipping weight 2.65kg

• 2,5'' voice coil fiberglass former and aluminium winding
• Progressive wave Konex spider
• Cloth surround with DAR technology
• Cone waterproof treatment
• Ventilated voice coil to reduce power compression
• BMF ferrite magnet
• 94.9 dB sensitivity

Recone kit γιά το FP10FH500

Mεγάφωνο 10" mid-bass 200W 100dΒ

High efficiency mid-bass, 2.5” aluminium voice coil,
with very flat response up to 4 kHz.

Specifications
Nominal Diameter 250 mm (10 in.)
Nominal Impedance 8 Ω
Minumum Impedance 6.9 Ω
Power Handling
(60 –600 Hz)
Nominal1 250 W
Continuous Program2 500 W
Sensitivity (1W/1m)3 99 dB
Frequency Range 60-4000 Hz
Voice Coil Diameter 65 mm (2.5 in.)
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 12 mm (1/2 in.)
Magnetic Gap Depth 8 mm (5/16 in.)
Flux Density 1.25 T
Also available in 16 Ω, data upon request

Thiele & Small Parameters4
Fs 60 Hz
Re 5.7 Ω
Qes 0.19
Qms 6.3
Qts 0.18
Vas 37 dm.3 (1.3 cu. ft.)
Sd 320 cm.2 (49.1 sq. in.)
η0 4.1 %
X max ± 2.4 mm.
Mms 27 gr.
Bl 17.7 Tm
Le 1.3 mH

Mounting and Shipping Informations
Overall Diameter 260 mm. (10.2 in.)
Bolt Circle Diameter 244 mm. (9.6 in.)
Baffle Cutout Diameter 228 mm. (8.8 in.)
Depth 110 mm. (4.3 in.)
Flange and Gasket Thickness 17 mm. (2/3 in.)
Net Weight 7.1 Kg. (15.6 lb.)
Shipping Weight 7.8 Kg. (17.2 lb.)
Shipping Box 320x320x160 mm
(12x12x6.3 in.)

1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range . Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 200 to 4000 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.