EDIFIER R1010BT Αυτοενισχυόμενα ηχεία ραφιού με Bluetooth BLACK (Ζεύγος)

R1010BT

Powered Bluetooth Speakers

• Connect two Bluetooth devices at the same time
• Speaker wire only for connecting the speakers together 
• Built-in amplifier eliminates need for amplifier/receiver

To kick it up a notch, the classic R1010BT Bluetooth speakers re-introduces bookshelf speakers in a whole new way. What you get is the high-quality audio performance you’d never expect from such simple a compact design. Housed in 100% medium-density fibreboard (MDF), this R1010BT is the revisitation of another Edifier classic, the R1000TCN. Featuring 4” bass drivers and 3/4” silk-diaphragm tweeter drivers, the R1010BT Bluetooth bookshelf speaker is engineered to deliver commanding sound with subtlety and details.

Dual integrated line-in jacks for connection to other analogue audio devices, saving you the trouble of plugging in and pulling out. The tone control encompasses bass and volume together with the dynamic treble enhancement on port A which is dedicated to catering to your playback preference. For a personalised listening experience, you’ll find the bass and volume adjustment dials at the back of this bookshelf speaker. The R1010BT Bluetooth bookshelf speakers also feature dual stereo line-in ports. Most of all, it is Bluetooth ready.

Sleek well-designed dome tweeters for smooth, articulate highs. Edifier delivers the experience you deserve.

Ceramic-paper cone drivers deliver powerful bass. A classic performance driven by Edifier’s leading technological savvy.

• TOTAL POWER OUTPUT：R/L: 12W+12W
 
• SIGNAL TO NOISE RATIO:≥85dB(A)
 
• FREQUENCY RESPONSE:70Hz-20KHz
 
• INPUT SENSITIVITY:Line in A: 700mV±50mV
  Line in B: 500mV±50mV
  Bluetooth: 400mV±50mFFS 
 
• INPUT TYPE:RCA (x2)
 
• BASS DRIVER:4 inch (106mm)
 
• TREBLE DRIVER:Φ13 mm
 
• DIMENSON:6in x 9.5in x7in (WxHxD)

Αυτοενισχυόμενο monitor μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 6,5" και tweeter 3/4“. Διαθέτει (Bi-Amp) δύο ενισχυτές 90W ξεχωριστούς για το woofer και το tweeter. Αναλογική είσοδος Ballanced XLR. Διακόπτης On/Off και ρυθμιστικά "Room Response Control“. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod). Χρώμα Μαύρο ματ (κατόπιν παραγγελίας διατίθεται σε χρώμα Λευκό και Αλουμινίου γυαλιστερό). Βάρος 8,6kg.

Ενεργό μόνιτορ 2-δρόμων bi-amplified (15W LF+15W HF). Διαθέτει woofer 3" (7.5cm) με κώνο νέας σχεδίασης από υαλονήματα & tweeter 3/4" (19mm) soft dome από μετάξι. Εύρος συχνοτήτων 110 Hz-20kHz (±3dB). Είσοδοι: RCA (L,R) & stereo mini jack. Βάρος 2,9kg. 

The combination of the dedicated 3" LF and 3/4" HF drivers together with the built-in D-class power amplifier delivers unparalleled audio performance in this class.

The PM0.3, inheriting the familiar cosmetic design of the best selling PM-series, is ideal for space-limited desktop home studio, PC audio and MP3 reproduction.

In DetailNewly designed 3" fiber glass cone woofer and 3/4" silk dome tweeter drivers.

Quality matt finished front baffle with a choice of three colors (black, gray and white).

Wooden enclosure box for best audio performance.

Compact yet highly efficient built-in digital amplifier of 15W each channel.

2 x inputs; RCA (L,R) and stereo mini.

Specifications
SPEAKER SECTION

LF driver:    3" (7.5cm) cone speaker
HF driver:    3/4" (19mm) soft dome tweeter
Frequency Response:    110 Hz – 20kHz (+-3dB)
Crossover Frequency:    2.65kHz

AMPLIFIER SECTION

INPUT A
    Connector:    RCA
    Input Sensitivity:    360mV
INPUT B
    Connector:    Stereo Mini
    Input Sensitivity:    650mV
Output Power:    15W + 15W (RMS)
T.H.D.    less than 0.1% (at 1W, 4-ohm loaded, 20-20kHz)
S/N Ratio:    90dB or less (A-weighted)

GENERAL

Power Supply:    DC IN 15V
Dimensions:    100mm (H) x 185mm (H) x 130mm (D) excluding protrusions
Net Weight:    2.9kgs (1.49kgs R unit + 1.44kg L unit)
Supplied accessories:    AC Adapter, L-R Speaker Cable (1.5m), Stereo mini – Stereo mini cable (0.8m)
 

ΤΙΜΗ ΤΕΜΑΧΙΟΥ

Main Monitors: S6X & S7A Mk2

The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive
concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.

Advanced DʽAppolito-array

The arrangement of the seven discrete drivers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitorʼs new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:

• There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
• The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120dB are handled without offending the ear.

Impulse Coupling

In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff Aluminum honeycomb plate (=IC).

Amplifiers

Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies (=PWM).

These are combined in an extremely powerful (1000 and 1500W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs.

The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.

The S6X: accuracy and power

The S6X is one of the most ambitious studio monitors available today. They can be found in some of the highest profile studios in the industry, from elite private studios to world class jazz, from rock and orchestral tracking and mixing facilities to high powered hip hop production rooms. The concept of the horizontal symmetry of the drivers is greatly affected by the generous proportions of the larger diaphragms, resulting in both exceptionally flat frequency response and extremely realistic dynamic reproduction across the entire audio spectrum. Numerous controls at the front panel allow detailed adaptations to different acoustic environments.

This main monitor offers very high accuracy and power in sheer abundance. SPL peaks beyond 120 dB are produced without any compression or harshness. The S6X is a top shelf choice for larger control rooms and film or sound studios.

Control panel (S6X & S7A Mk2)

Numerous controls on the front panel introduce a new degree of control for main monitors. Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200Hz) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.

In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.

Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.

A second switchable input on the front allows servicing without moving the unit.

All LED indicators can be dimmed if necessary.

Αυτοενισχυόμενο monitor DSP μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 8" και tweeter 1“. Διαθέτει (Bi-Amp) δύο ενισχυτές ξεχωριστούς 150W για το woofer και 120W για το tweeter. Διαθέτει ψηφιακή (AES/EBU) είσοδο και Thru καθώς και αναλογική είσοδο Ballanced XLR. Διαθέτει δύο εισόδους δικτύου ελέγχου GLM (Genelec Loudspeaker Manager). Διακόπτης On/Off και ρυθμιστικά "Room Response Control" και επιλογής "Stand-Alone" λειτουργίας. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod). Χρώμα Μαύρο ματ (κατόπιν παραγγελίας διατίθεται σε Λευκό χρώμα). Βάρος 14,6kg.