Content |
- Can be operated directly as a standalone or in conjunction with D & R Airmate / Airance / Axum
- Cable and mounting holes on the back
- 12 Volt / 450 mAh
- Dimensions (W x H x D): 260 x125 x 65 mm
- Incl. power supply
D&R Studio sign On Air light Mono Face, A perfect matching ON-AIR lamp for all our mixers. You can of course use the unit too for other brands.
We can supply you a perfect matching ON-AIR lamp for all our mixers.
You can of course use the unit too for other brands. We call it ON-AIR Lamp but actually there is no lamp inside anymore, just everlasting high intensity red leds. The unit is powered by a 12 volt DC 1A external power supply. And what's more... no hassle with how do I connect this thing to my AIRMATE-USB/AIRENCE-USB/AIRLAB or AXUM. No complicated high voltage AC switching with external relays etc. etc. What you only need is one stereo cable (wired tip/ring) coming from the MIC-ON connector on the back of the AIRMATE/AIRENCE/AIRLAB console that goes directly hardwired to a terminal strip inside the ON-AIR LAMP. How easy is this for a change. The power adapter will also be directly wired to the terminal strip inside the unit.
Width: 260mm
Height: 125mm
Depth: 65mm
The power adapter (included in the delivery) will also be directly wired to the barrier strip inside the unit
| Επαγγελματικό μικρόφωνο ηχογράφισης με αναδιπλούμενη βάση/βραχίωνα και κλιπ για εγκατάσταση σε γραφείο ή τραπέζι και κάρτα ήχου με ρύθμιση ήχου και μουσικά εφέ. Συνοδεύεται με καλώδιο 2.5m, καθώς και φίλτρο και βαμβακερό κάλυμμα τα οποία το καθυστούν κατάλληλο για όλες τις περιπτώσεις ηχογράφισης, πχ για ραδιοφωνική εκπομπή, karaoke, ηχογράφιση για επεξεργασία στον υπολογιστή κλπ.
Περιεχόμενα Συσκευασίας:
- 1 X χρυσό μαύρο μικρόφωνο 16 x 4.5cm
- 1 X δίχτυ-φίλτρο 15.5cm
- 1 X αντικραδασμικό πλαίσιο
- 1 X βαμβακερό κάλυμμα μικροφώνου
- 1 X μαύρο κλιπ
- 1 X κλιπ μικροφώνου
- 1 X καλώδιο ήχου 2m
- 1 X βάση γραφείου/τραπεζιού 38 x 37cm
- 1 X εγχειρίδιο χρήσης στα αγγλικά
- 1 x Κάρτα ήχου
- 3 x Καλώδια micro USB
- 1 x αντάπτορας USB σε θηλυκά 3.5mm
| Behringer DX2000USB Professional 7-Channel DJ Mixer with INFINIUM VCA Crossfader and USB/Audio Interface
Designed to accommodate complex setups, the Behringer PRO MIXER DX2000USB is a professional 7-channel DJ mixer with an INFINIUM Contact-Free VCA crossfader and a USB/audio interface, making it well suited for multimedia presentation with a variety of audio platforms (vinyl, CDs, mp3) and multiple mics.
The DX2000USB includes 5 dual stereo inputs plus 2 mono mic/line channels with ULN mic preamps, phantom power, gain control, and Clip LEDs. Each stereo channel features an ultramusical 3-band Kill EQ with on/off switches. Other notable features include Main dim, boost, punch, and cut functions to jazz up your mix and a Sub-Bass output for connecting a dedicated subwoofer for massive low-end control. The DX2000USB includes removeable rack ears (8 RU) and a power cord.
- Professional, 7-channel, ultralow-noise DJ mixer with state-of-the-art phono preamps
- infinium contact-free optical crossfader with adjustable friction for years of use
- 5 dual stereo inputs plus 2 mono mic/line channels with ULN mic preamps, phantom power, gain control and clip LED
- Built-in USB interface for recording and playback of any digital music file. Works with your PC or Mac computer; no setup or drivers are required
- Massive software bundle including Audacity vinyl restoration and recording, Podifier, and Golden Ear podcasting software
- Ultramusical 3-band kill EQ (-32 dB) with EQ on/off switch on all stereo channels
- Long-wearing 3.9" faders and sealed rotary controls on all input channels
- Headphone output with Level and Balance (PFL/Main) controls, switchable split mode and level display
- Auto-talkover function with separate Sensitivity, Time, and Damping controls
- Main Dim, main Boost, Punch, and Cut functions for mixing
- Sub-bass output for separate subwoofer, additional Zone output for second room/area
- Planet Earth switching power supply for maximum flexibility (100 to 240V), noise-free audio, superior transient response plus low power consumption for energy saving
- Rackmount brackets included for ultimate flexibility
The DX2000USB features Behringer's supersmooth channel faders and the INFINIUM contact-free, VCA-controlled, optical crossfader, for the ultimate in reliability and state-of-the-art audio performance. A dedicated CF Curve control allows you to custom-tailor the crossfader's control characteristic, and you can even set the crossfader tension just the way you like it.
The DX2000USB features 5 dual-stereo inputs plus 2 mono Mic/Line channels, with Behringer's ultralow-noise (ULN) mic preamps, phantom power, gain control and clip LED. The DX2000USB has enough built-in phono preamps to handle up to 3 turntables. Finally, the built-in USB/audio interface gives you the power to add your computer’s digital music library to the mix.
- The DX2000USB comes armed with a 3-band kill EQ and Gain control per channel. Mono channels feature an additional Low Cut switch and an FX switch that routes the channel to the FX Send and Return loop, so you can add a touch of your outboard effects. These channels, which accept microphone and ¼" line sources, also feature a Talkover button, a Channel On button, and PFL switch for headphone monitoring. Stereo channels have an EQ on/off switch, as well as a Crossfader button that sends the channel to the main stereo mix or the crossfader. An Assign button selects whether the channel appears on the X or Y side of the Crossfader.
- For the DJ in need of mammoth bass, the DX2000USB features an XLR Sub-Bass Out (perfect for connecting to an active subwoofer), and with an adjustable Crossover Frequency (30 to 200 Hz) and dedicated Level control. Directly above, the DX2000USB provides a ¼" Main Mono output for synching your music’s strongest pulses with a lighting system. The Main Output section offers ¼" and XLR stereo outputs, and ¼" inputs for connection to outboard EQ units. This section also features RCA outputs for recording your set. The Monitor/Zone Output section gives you stereo ¼" and XLR Monitor Outputs, as well as ¼" stereo Zone Outputs.
Number of Channels |
5x Stereo
2x Mic/Aux |
Platter/Jog Wheel |
No |
Faders |
7x 3.9" / 100 mm Channel Level
1x Crossfader (Adjustable Fade Curve) |
Meters |
Main Meter:
2x 12-Segment LED
Channel Meter:
1x 12-Segment LED |
Meter Range |
-30 to +10 dB Before Clip |
Display |
No |
Sample Pads |
No |
EQ |
7x Channel EQ:
Hi: -18 to +6 dB at 15 kHz
Mid: -25 to +6 dB at 1.4 kHz
Low: -25 to +6 dB at 50 Hz |
Performance Controls |
EQ |
Built-In Effects |
No |
Sample Rates |
48 kHz |
Stems Processing |
No |
Connectivity
Audio Inputs |
2x XLR 3-Pin Balanced Mic Input
2x 1/4" TRS Balanced Line Input
7x Stereo 2RCA Coaxial Unbalanced Line Input
3x Stereo 2RCA Coaxial Unbalanced Phono Input
2x 1/4" TS Unbalanced Line Input
1x Stereo 2RCA Coaxial Unbalanced Return Input |
Audio Outputs |
2x XLR 3-Pin Balanced Master Output
1x XLR 3-Pin Balanced Master/Subwoofer Output
2x 1/4" TRS Balanced Master Output
1x 1/4" TRS Balanced Master/Subwoofer Output
1x Stereo 2RCA Coaxial Balanced Master Output
2x XLR 3-Pin Balanced Booth/Zone Output
2x 1/4" TRS Balanced Booth Output
2x 1/4" TRS Balanced Zone Output
1x 1/4" TRS Unbalanced Send Output
1x Stereo 2RCA Coaxial Unbalanced Line Output
1x 1/4" TRS Unbalanced Headphone Output |
Phantom Power |
48 V |
USB |
1x USB-B (Host Connection) |
Wireless |
No |
Media Card Slots |
No |
Performance
Frequency Response |
Line/Mic:
10 Hz to 80 kHz +0/-3 dB
Stereo RCA CD/Line Input:
10 Hz to 130 kHz ±3 dB
Stereo RCA Phono Input:
20 Hz to 20 kHz (RIAA) |
Input Level |
XLR Mic:
+60 dB (Balanced, Electronically Balanced)
1/4" Line:
+40 dB (Balanced)
Stereo RCA Phono:
+17 dB (Unbalanced)
Stereo RCA Line:
+17 dB (Unbalanced) |
Gain/Trim Range |
XLR Mic Input:
+10 dB to +60 dB
1/4" Line Input:
-10 dB to +40 dB
Stereo RCA Line/CD/Phono Input:
-20 dB to +17 dB |
Output Level |
XLR Master:
+6 dB
1/4" Master:
0 dB
Stereo RCA Aux/Booth/Insert:
0 dBu |
SNR |
Line:
85 dB (Mono Input)
CD/Line:
-82 dB (Stereo Input)
Phono:
-78 dB (Stereo Input) |
THD |
XLR Mic Input:
<0.08% (at -30 dBu, 1 kHz)
1/4" Line Input:
0.08% (at -10 dBu, 1 kHz)
Stereo RCA CD/Line:
0.05% (at 0 dBu, 1 kHz)
Stereo RCA Phono Input:
0.1% (at -40 dB, 1 kHz) |
Compatibility
Included Software |
No |
OS Compatibility |
Windows
macOS |
Mobile App Compatible |
No |
Required Hardware |
USB-A Port |
Power
Power Requirements |
AC Input |
AC Input Power |
100 to 240 VAC, 50/60 Hz |
AC Power I/O |
1x IEC Input |
Power Consumption |
40 W |
Physical
Rackmount Size |
8 RU (with Included Hardware) |
Dimensions (W x D x H) |
17.3 x 13.4 x 6.3" / 440.0 x 340.0 x 160.0 mm |
Weight |
14.8 lb / 6.7 kg |
| D&R Airmate-USB
Extremely popular low budget Radio-On Air console. Thousands of happy users.
- 8 Triple inputs with 6 balanced mic inputs with 3-band EQ
- 48V Phantom power
- 12 Stereo line inputs
- 2x USB and 2x telephone hybrid (RJ45)
- Fader start
- Aux pre or post
- Design: 19“, 8U
- Weight: 11 kg
- OPTIONAL: Digital AES/EBU output
Version with Digital out: https://www.artsound.gr/catalog/airmate-broadcast-mixer-6mic-12st-input-4inst-2usb-2hybrids-1dig-p-40076.html?osCsid=sik7imkgvqtfj5acb59qk5krh5
Faderstarts and Cleanfeeds are standard
We designed the Airmate-USB to fulfill the requirements for a high grade low cost radio production mixer. Built around well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. that needs an internal Telephone Hybrid (2x) and USB connection to the PC (e.q. for streaming to the web). A heavy duty 19" rack mounted RF shielded chassis houses 8 vertical triple input modules giving flexibility rarely found in a mixer of this type. Six input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors. Every Mic input has an insert for signal processors. And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.
Built in Telephone Hybrids This new Airmate-USB model has 6 balanced mic inputs (+48 phantom is standard) with insert, 12 stereo line inputs, 2x USB and 2x Telephone Hybrids. Channel 5 and 6 have Mic/Line and USB interface to transfer audio from and to your PC. Channel 7 and 8 have, apart from the stereo line input, also RJ-11 connectors to interface with a POT (Plain Old Telephone) line and a Telephone appliance to dial the number you want to reach. High quality built in Hybrids with R (trimmer on the surface) and C balance (switch on the surface) and direct Connection and Talkback buttons in the Hybrid channels makes a conversation with listeners very easy. With the Telco Send (level to the caller) and Telco Gain (level coming from the caller) all levels can be easy adjusted.
But be always aware of the fact that the RC balance has to be adjusted once to create a clean telephone signal send and receive. The manual will give info about this pretty simple procedure. The front panel ON switch is wired in series with the built in mechanical fader start enabling selection of start either by fader or hard start via the ON switch. Fader start generates in the Mic mode a Mic-on signaling to switch on ON-Air lights. There is a 3 band Equalizer on channel 1-6. The stereo Aux send can be set pre or post fader. All mic inputs have low cut jumpers. A clean feed send is available for external analog and digital Hybrids. Built in VoIP or Telco channels We now have dedicated VoIP channels available for the AIRMATE-USB, or a combination of one TELCO module and one VoIP module. If you still want to use a classic analogue or digital Hybrid we have designed a cleanfeed output on pin 1-4 of the RJ11 connector. You can return the Hybrid signal on the line input of the VoIp module. Please tell your dealer the combination you want.
VoIP | ISDN | GSM If you would like to call with VOIP we can supply a pcb with all the VoIp options on it that replaces the existing Telco module(s) for landlines. You can do that for one or both Telco modules, whatever your choice is.
If you do not want a permanent VoIP solution you can use the CISCO SPA112 as an interface between our 2 Telephone modules and the Internet. And in case you have an ISDN connection in your situation, we advice to use the Fritz Box type 7390 to convert the ISDN into an analog line that can be connected directly to the Telco modules of the Airmate-usb mixer. If you want to connect the Airmate-USB to the GSM network just buy from a third party this Musitel unit connect it to the Phone RJ11 socket and you're set. Now is the time to install your own production room The Airmate-USB has the usual master controls such as stereo master faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function. There is a balance control to continuously adjust the volume between main output and stereo Cue signal. In addition, there is a special Radio On-air/production section featuring; Selfop switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode. A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output. The focal point in a production studio The Airmate-USB is designed to be the focal point for local radio production work in the studio or at home. It’s comprehensive, yet understandable features make it the ideal companion for rapid on-the-spot radio programs. Small, reliable and 19" rack mounting ideal for production rooms. It can also double as an On-Air mixer or implemented in your own Internet Radio station. If your budget is tight, it never becomes obsolete as it can revert to production use, if, at a later date you fit in a larger On-Air mixer.
|
Η XB-10 της Allen&Heath είναι broadcasting κονσόλα ιδανική για μικρό ραδιοφωνικό σταθμό ή internet radio. Διαθέτει 3 εισόδους mic/line, 3 εισόδους Stereo και 1 είσοδο Telco με επιλογή USB routing για εισερχόμενες κλήσεις VoiP. Ενσωματωμένη full duplex USB κάρτα ήχου για recording ή internet broadcasting. Επίσης έχει CompACT (Adaptive Compression Technology) compressor σε κάθε μια από τις 3 εισόδους μικροφώνου που παρεμβαίνει στην στάθμη του σήματος ήχου. Σε αντίθεση με άλλους compressors που έχουν ως σκοπό τον περιορισμό στις υψηλές στάθμες, ο συγκεκριμένος επεμβαίνει σε όλες τις στάθμες σήματος. Στα χαμηλής στάθμης σήματα δίνεται ένα gain boost (ενίσχυση), τα μεσαίου επιπέδου σήματα συμπιέζονται ηπίως, και τα υψηλής στάθμης περιορίζονται ωστε να εχουμε ενα ομαλο σημα.
- 3 mic/line and 3 stereo inputs
- Telco channel with optional USB routing for VoIP
- CompACT compressors on mic channels
- ON switch logic on mic and telco channels
- Start/cue logic outputs on stereo channels
- Separate headphones mix and outputs
- Auto mutes on control room outputs
- Remote mute facility on mic channels
- Responsive 3-band, swept mid EQ with MusiQ
- Configurable USB stereo audio in/out
- XLR main outputs with inserts and variable limiter
- Aux / Alt bus for external processing, recording or auditioning
USB
XB-10 comes with a full duplex USB soundcard built-in and many useful routing options for recording and broadcast applications.
MusiQ
XB-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ with optimised slope for a variety of sources.
Output Limiter
A variable limiter ensures the level does not exceed a pre-defined level. Back panel option switches allow the limiter to be bypassed. A trim pot is used to vary the threshold and an LED on the front panel indicates when the limiter has triggered.
CompACT Compressor
XB-10 features our ComPACT compressor on each of its mic channels. CompACT (Adaptive Compression Technology) is a program-dependent audio leveller. Unlike other compressors, which are effective only at reducing loud sounds, CompACT combines both downward and upward compression with peak limiting. Low level signals are given a gain boost, mid level signals are mildly compressed with a soft knee response, and high level signals are limited.
|
D&R Airmate-USB
Extremely popular low budget Radio-On Air console. Thousands of happy users.
- 8 Triple inputs with 6 balanced mic inputs with 3-band EQ
- 48V Phantom power
- 12 Stereo line inputs
- 2x USB and 2x telephone hybrid (RJ45)
- Fader start
- Aux pre or post
- Design: 19“, 8U
- Weight: 11 kg
Faderstarts and Cleanfeeds are standard
We designed the Airmate-USB to fulfill the requirements for a high grade low cost radio production mixer. Built around well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. that needs an internal Telephone Hybrid (2x) and USB connection to the PC (e.q. for streaming to the web). A heavy duty 19" rack mounted RF shielded chassis houses 8 vertical triple input modules giving flexibility rarely found in a mixer of this type. Six input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors. Every Mic input has an insert for signal processors. And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.
Built in Telephone Hybrids This new Airmate-USB model has 6 balanced mic inputs (+48 phantom is standard) with insert, 12 stereo line inputs, 2x USB and 2x Telephone Hybrids. Channel 5 and 6 have Mic/Line and USB interface to transfer audio from and to your PC. Channel 7 and 8 have, apart from the stereo line input, also RJ-11 connectors to interface with a POT (Plain Old Telephone) line and a Telephone appliance to dial the number you want to reach. High quality built in Hybrids with R (trimmer on the surface) and C balance (switch on the surface) and direct Connection and Talkback buttons in the Hybrid channels makes a conversation with listeners very easy. With the Telco Send (level to the caller) and Telco Gain (level coming from the caller) all levels can be easy adjusted.
But be always aware of the fact that the RC balance has to be adjusted once to create a clean telephone signal send and receive. The manual will give info about this pretty simple procedure. The front panel ON switch is wired in series with the built in mechanical fader start enabling selection of start either by fader or hard start via the ON switch. Fader start generates in the Mic mode a Mic-on signaling to switch on ON-Air lights. There is a 3 band Equalizer on channel 1-6. The stereo Aux send can be set pre or post fader. All mic inputs have low cut jumpers. A clean feed send is available for external analog and digital Hybrids. Built in VoIP or Telco channels We now have dedicated VoIP channels available for the AIRMATE-USB, or a combination of one TELCO module and one VoIP module. If you still want to use a classic analogue or digital Hybrid we have designed a cleanfeed output on pin 1-4 of the RJ11 connector. You can return the Hybrid signal on the line input of the VoIp module. Please tell your dealer the combination you want.
VoIP | ISDN | GSM If you would like to call with VOIP we can supply a pcb with all the VoIp options on it that replaces the existing Telco module(s) for landlines. You can do that for one or both Telco modules, whatever your choice is.
If you do not want a permanent VoIP solution you can use the CISCO SPA112 as an interface between our 2 Telephone modules and the Internet. And in case you have an ISDN connection in your situation, we advice to use the Fritz Box type 7390 to convert the ISDN into an analog line that can be connected directly to the Telco modules of the Airmate-usb mixer. If you want to connect the Airmate-USB to the GSM network just buy from a third party this Musitel unit connect it to the Phone RJ11 socket and you're set. Now is the time to install your own production room The Airmate-USB has the usual master controls such as stereo master faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function. There is a balance control to continuously adjust the volume between main output and stereo Cue signal. In addition, there is a special Radio On-air/production section featuring; Selfop switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode. A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output. The focal point in a production studio The Airmate-USB is designed to be the focal point for local radio production work in the studio or at home. It’s comprehensive, yet understandable features make it the ideal companion for rapid on-the-spot radio programs. Small, reliable and 19" rack mounting ideal for production rooms. It can also double as an On-Air mixer or implemented in your own Internet Radio station. If your budget is tight, it never becomes obsolete as it can revert to production use, if, at a later date you fit in a larger On-Air mixer.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.