Content |
Προενισχυτής In ear monitor με mono ή stereo λειτουργία με διακόπτη και δυνατότητα mix (2 XLR In). Ρύθμιση έντασης. Έξοδος mini jack stereo. Λειτουργεί με μπαταρία 9V & τροφοδοτικό PSU-SB (Δεν περιλαμβάνεται).
Κατασκευαστής |
BEHRINGER |
Κανάλια Μίξης |
2 |
Μοντέλο |
P1 |
Part Number |
000-AZM |
Εγγύηση |
1 Χρόνος Εγγύηση |
|
Monitor Mixer Ακουστικών
Πρόβλημα: Ο μουσικός χρειάζεται να ακούει το όργανο του με ακουστικά, μεμονωμένα ή μιξαρισμένο από την έξοδο της κονσόλας, την έξοδο ενός CD player, ή οποιαδήποτε άλλη στέρεο πηγή. Στην κεντρική κονσόλα όμως, πηγαίνει μόνο το σήμα μικροφώνου.
Λύση: Συνδέστε το MyMONITOR ανάμεσα στο μικρόφωνο ,την line πηγή και την κονσόλα .Οι στάθμες εντάσεως καθώς και μίξης του μικροφώνου και line πηγής μπορούν να ρυθμιστούν μέσω ακουστικών. Το MyMONITOR μπορεί να τροφοδοτηθεί μέσω μπαταρίας ή τροφοδοτικού AC και μπορεί να χρησιμοποιηθεί οπουδήποτε, όπως από ένα μεγάλο φεστιβάλ ή σε εφαρμογές όπου δεν υπάρχει η δυνατότητα τροφοδότησης ηλεκτρικού ρεύματος. Δεν υπάρχει περιορισμός στην σύνδεση τύπων μικροφώνων. Εκτός από δυναμικά μπορούν να συνδεθούν και πυκνωτικά μικρόφωνα, καθώς η απαιτούμενη τροφοδοσία 48V μπορεί δοθεί από την κονσόλα μας ή οποιαδήποτε άλλη συσκευή οπού έχει αυτήν την δυνατότητα .
MyMONITOR - Personal Headphone Monitor Mixer Overview
Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.
MyMONITOR - Personal Headphone Monitor Mixer Specifications:
Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)
|
Σύστημα ενίσχυσης ήχου για τη σύνδεση ακουστικών απʼ ευθείας σε κιθάρα / μπάσο και με ήχο METAL.
Διαστάσεις: 79,5mm x 75,5mm x 15,5mm, Βάρος: 40g
Έλεγχος Gain, Tone, Volume. Είσοδοι : Phone Jack/AUX In Jack, θύρα USB.
|
Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
|
Μίνι ενισχυτής ακουστικών για κιθάρα JOE SATRIANI signature, με τεχνολογία analog modeling εξομοίωσης με κύκλωμα High-Gain UK amp. Είσοδος AUX για σύνδεση με εξωτερική πηγή ήχου. Λειτουργία με 2xAAA μπαταρίες.
Specifications -
Power supply: AAA batteries (x 2)
-
Battery life (FX on):
Zinc-carbon batteries: approximately 3 hours
Alkaline batteries: approximately 11 hours
-
Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22"
-
Weight: 40 g/1.41 oz. (not including batteries)
-
Included items: Two AAA batteries (for verifying operation)
|
LDHPA6 6-Channel Rackmount Headphone Amplifier
The LD Systems HPA 6 is a highly flexible 1U 19" rack format headphone amplifier with 6 fully independent channels and comprehensive features for a wide range of professional audio monitoring applications.
Each channel provides a 6.3 mm TRS headphone output on the front panel with level control, mono/stereo switching, discrete left/right muting and a 6.3 mm TRS Aux input with Main/Aux balance control for mixing in further signal sources. Four-segment LED meters permit visual output level monitoring, and two 6.3 mm TRS outputs per channel on the rear allow for connecting a total of 18 headphones.
The HPA 6\'s main section features a master level control with eight-segment LED metering and 6.3 mm TRS input to mix in an additional source with all channels. The rear panel provides the main stereo inputs on balanced XLR and 6.3 mm TRS connectors and stereo outputs for daisy chaining multiple units.
- Type: 6-channel
- Inputs: Main Input (Stereo), Direct In (Stereo), 6 x Aux In (Stereo)
- Input Connections: XLR and 6.3 mm jack L&R (Main Input, balanced), 6.3 mm stereo jack (Direct In), 6.3 mm stereo jack (Aux In)
- Input Impedance: 13 kOhm
- Line Outputs: Main Output (stereo, balanced)
- Line Output Connectors: XLR and 6.3 mm jack L&R
- Headphone Outputs: 6 x 3
- Headphone Output Connectors: 6.3 mm stereo jack
- Power Output: 6 x 125 mW
- Minimal Connected Impedance per Channel: 8 ohms
- Frequency Response: 20 Hz - 20.000 Hz
- Controls: Main Input Level, 6 x Input Mix Main/Aux, 6 x Headphone Level, 6 x Mono Switch, 6 x Mute L&R, Power
- Indicators: Main Input/Direct In Level Meter (8-segment LED chain), 6 x channel level meter (4-segment LED chain), 6 x mono LED, 6 x Mute L&R LEDs, Power LED
- Power Supply: IEC power socket
- Operating Voltage: 220 - 240 V AC, 50 - 60 Hz / 110 - 120 V AC, 50 - 60 Hz
- Power Consumption: 40 W
- Cabinet Material: metal
- Cabinet Surface: painted
- Width: 483 mm
- Height: 44 mm
- Depth: 217 mm
- Accessories (included): power cord
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.