Content |
The AT803 provides excellent yet unobtrusive sound pickup for lecturers and stage/TV performers. Designed for clip-on lavalier and musical instrument use, it features an integral 80 Hz high-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The microphone operates on battery or phantom power.
- High intelligibility for lecturers and stage/TV performers
- Provides excellent yet unobtrusive sound pickup
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Operates on battery or phantom power
- 6' (1.8 m) cable permanently attached to mic, TA3F connector at power module
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
- Element Fixed-charge back plate, permanently polarized condenser
- Polar Pattern Omnidirectional
- Frequency Response 30-20,000 Hz
- Low Frequency Roll-Off 80 Hz, 18 dB/octave
- Open Circuit Sensitivity Phantom: -44 dB (6.3 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa
- Impedance Phantom: 200 ohms Battery: 270 ohms
- Maximum Input Sound Level Phantom: 135 dB SPL, 1 kHz at 1% T.H.D. Battery: 121 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (Typical) Phantom: 107 dB, 1 kHz at Max SPL Battery: 93 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio 66 dB, 1 kHz at 1 Pa
- Phantom Power Requirements 11-52V DC, 2 mA typical
- Battery Type 1.5V AA/UM3
- Battery Current / Life 0.4 mA / 1200 hours typical (alkaline)
- Switch Off, on-flat, on-roll-off
- Weight (Microphone) 2.8 g (0.1 oz)
- Weight (Power Module) 139 g (4.9 oz)
- Dimensions (Microphone) 25.0 mm (0.98“) long, 10.2 mm (0.40“) diameter
- Dimensions (Power Module) 84.0 mm (3.31“) H x 63.0 mm (2.48“) W x 22.0 mm (0.87“) D
- Output Connector (Power Module) Integral 3-pin XLRM-type
- Cable 1.8 m (6') long (permanently attached to microphone), 2.6 mm (0.10“) diameter, 2-conductor, shielded cable with TA3F-type connector
- Accessories Furnished AT8531 power module; AT8419 clothing clip; AT8116 windscreen; battery; protective carrying case
- Audio-Technica Case Style M1
|
Πυκνωτικό μικρόφωνο πέτου omnidirectional, ευαισθησία 10MV/PA, 126dΒ MAX SPL, απόκριση συχνότητας 20Ηz-20kΗz. Phantom power 9V-52V. Βύσμα MINI XLR για χρήση με το B 29L τροφοδοτικό μπαταρίας, το MPA III L εξωτερικό phantom power και όλα τα AKG WMS bodypack transmitters. Κατάλληλο για broadcast και θεατρικές παραγωγές. |
Lavaliere Microphone for WS 100 BP Belt Pack and for WS 1616 BP Belt Pack - Uni-directional Electret Condenser Lavaliere Microphone
- Impedance
- Frequency range : 20 Hz – 20 KHz
- Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type
Wireless Microphone System Accessories
Type
Microphones
Frequency response
20 - 20.000 Hz
Directivity
cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
attaching clip , Foam windscreen
Weight
0,04 kg
|
Miniaturized lavalier condenser microphone for wireless or wired applications.
The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to use.
Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz - 18 kHz. This mic is lightweight, low profile and has a natural sound with exceptional sound response.
Primarily for use with the Audix RAD360 Wireless System, the ADX10 includes a tie-clip and a 3' attached cable terminating to a mini-XLRf connector.
MODEL VARIATIONS:
ADX10P - For hard wired application. Includes an 8' cable terminating to a mini-XLRf connector tie clip, external windscreen and a phantom power adapter module. 9 - 48 V phantom power required.
Type | Pre-polarized Condenser | Polar Pattern | Cardioid | Frequency Response | 50Hz - 18kHz | Impedance | 250 Ohms | Sensitivity | 5 mV/Pa @1k |
|
Δυναμικό μικρόφωνο κατάλληλο για πνευστα όργανα (φλαουτο, σαξοφωνο κ.λ.π.) , επίσης κατάλληλο για κρουστά
με λαιμό εύκαμπτο και ευκολη τοποθέτηση σε όργανο για να έχει την μεγαλύτερη ηχητική απολαβή εξόδου.
The e 608 is a super-cardioid microphone ideal for almost invisible clip-miking
of woodwind (except certain Flutes), brass and drums. A newly developed clamp
and gooseneck mounting enables the capsule to be positioned close to the signal
source for high realism and high-level output.
Features
Rugged reinforced glass-fibre body
Shock-mounted capsule provides low sensitivity to impact and handling noise
Hum compensating coil
Extremely robust connection cable with XLR connector
Delivery Includes
1 e 608
1 microphone clip
1 pouch
Technical Data
Frequency Response 40.....16000 Hz
Sensitivity in free field, no load (1kHz) 0,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 17 x 185 mm
Weight w/o cable 20 g
|
Πυκνωτικό μικρόφωνο πέτου με καρδιοειδές πολικό διάγραμμα.
Το ενσωματωμένο bass roll off φίλτρο μειώνει τους ανεπιθύμητους
ambient ήχους και σε συνδυασμό με μια μικρή αύξηση από τους
10kHz και πάνω παρέχουν μεγαλύτερη καθαρότητα και πιο φυσικό ήχο.
Απόκριση 150-18.000 Hz, ευαισθησία 8.8mV/PA, Max SPL 118dB.
Phantom power 9-52V, καλώδιο 1,6 μέτρα με βύσμα mini XLR για
συνδυασμό με όλα τα AKG ασύρματα συστήματα. Αντιανέμιο,
μανταλάκι, χρώμα μαύρο, κατάλληλο για χώρους λατρείας,
τηλεόραση, T.V. productions, tour guide.
Hide and speak for house-of-worship, conference and theater applications
The CK99 L is a condenser lavalier microphone with cardioid polar pattern. It provides a natural sound, with a slight rise above 10kHz for added clarity, perfect for applications in houses of worship, lectures and theaters.
Thanks to its small housing and the included durable metal clip, it can be inconspicuously and securely mounted on jackets and costumes. The CK99 L provides a professional three-pin mini XLR connector that fits the body pack transmitters of all AKG wireless microphone systems.
Cardioid polar pattern
eliminates noise from the rear
125° pickup angle
for inexperienced or very vivacious talkers
Small housing and durable metal clip
for inconspicuous, secure mounting
Technical Specification General | Audio Frequency bandwidth | 15 to 18000 Hz | Sensitivity | 8.8 mV/Pa | Equivalent Noise Level | 34 dB-A | Signal to Noise | 60 dB-A | Electrical Impedance | 200 Ohms | Recommended Load Impedance | 2000 Ohms | | Polar Patterns | | Powering Interface | Voltage | 1.5 to 10 V | Current | 2 mA | | Audio Output | Type | Mini XLR | Gender | Female | Contacts | 3-pin | | Design | | Dimensions / Weight | Height | 23 mm | Diameter | 8 mm | Net Weight | 2.5 g | |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.