Stock | Μόνο 4 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Διαθέσιμο κατόπιν παραγγελίας
| Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Σε απόθεμα
| Διαθέσιμο κατόπιν παραγγελίας
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
|
Content | Isolation Pad for Studio Monitors 265 x 330 mm
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
265 mm
Height
40 mm
Depth
330 mm
Weight
0,22 kg | The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
900 mm
Max height
1500 mm
Height adjustment
Clamp with safety pin
Base type
3-point
Base material
Cast iron
Base edge length
292.5 mm
Lower connector
M20
Tubing diameter
42 mm / 35 mm
Max. load
50 kg
Interchangeable rings
1 x 25 mm , 1 x 30 mm
Weight
6,5 kg
Additional information
Including acoustic isolation spikes |
- Ύψος: 30-40-50 cm (3 ρυθμίσεις με safety pin)
- Διαστάσεις πάνω επιφάνειας: 23 x 23 cm
- Διαστάσεις κάτω επιφάνειας: 24 x 24 cm
- Μέγιστο βάρος φόρτωσης: 25 kg
- Bάρος βάσης: 2,75 kg (ανα βάση)
- Υλικό: Ατσάλι
| A mix\'s sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it\'s not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.
- Infinitely variable height adjustment
- Tilt angle up to +/- 15°
- 360° rotatable
- EVA padded bearing surface
- Anti-tip for the speaker
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder-coated
Min height
263 mm
Max height
358 mm
Tilt angle
+/- 15 °
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base material
Steel
Base edge length
250 mm
Max. load
25 kg
Interchangeable rings
1 x 20 mm , 1 x 30 mm
Black ring pack included
Yes
Weight
4,1 kg | The Fluid Audio DS5 desktop monitor stands are designed for use with all 4” and 5” 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 2.5” and 5”. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt.
Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or "beamy”), getting them up and closer to ear level means you hear a more full-frequency response. Made from MDF wood (the same material as your monitor enclosures) they are rugged and acoustically well damped. The stand "posts” are made with polypropylene, minimizing the "ringing” sound of ABS plastic. Both top and bottom of the stands are capped off with extremely absorbent, 40 durometer rubber feet. The result of the stand construction allows your monitors to "breathe” and to produce much purer tones and a less distorted midrange.
Package Contents
- 4 x 2.5” stand "posts”
- 4 x 5” stand "posts”
- 4 x middle stabilizers
- 10 rubber feet (10mm)
- 5 rubber feet (18mm)
- 10 screws (for mounting posts)
Features
- Fits all 4” and 5” studio monitors
- Allows for 2 height adjustments: 2.5” and 5”
- Allows for 3 angle adjustments: Flat, 3 deg and 6 deg
Specifications/Material
- Middle stabilizers: Vinyl-laminated MDF
- Stands: Polypropylene plastic
- Rubber: Highly absorbent, 40 Durometer
- Size (packed): 5.94 x 7.44 x 4.5”
- Max load 10kg per unit
- Weight: 0.9kgs/giftbox
Measures
- Total depth: 185mm
- Distance between front and rear rubber support: 127mm
- Total width: 142mm
- Distance between left and right rubber support: 117mm
| Το Nowsonic Shock Stop S είναι μια οικονομική λύση για τη βελτιστοποίηση του ήχου στο στούντιό σας. Οι απορροφητές έχουν σχεδιαστεί για να εξαλείφουν τη μεταφορά κραδασμών από τα ηχεία του στούντιο στην επιφάνεια της βάσης. Είναι επομένως ένας απλός και αποτελεσματικός τρόπος προστασίας από τον συντονισμό και παρέχουν μια πιο γραμμική μετάδοση. Ο αρθρωτός σχεδιασμός σημαίνει επίσης ότι μπορούν να επιτευχθούν διαφορετικές γωνίες διασποράς.
Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: M
- Dimensions: 250 x 320 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.